Quantcast
Jump to content
  • Welcome to Auto Parts Forum

    Thanks for visiting our brand new online forum for automotive parts. We are just starting to build content and invite you to join us here in our new online discussion forum for automotive parts topics.  Whether you are a veteran automotive parts guru or just someone looking for some quick auto parts advice, register today and start a new topic in our forum. Registration is free and you can even do it with social network platforms such as Facebook, Twitter, Google, and LinkedIn.  

Recommended Posts

Basic knowledge of shock absorbing rubber products

1. Static stiffness: refers to the ratio of the change of pressure (or tensile force) to the change of displacement in a given displacement range. The static stiffness must be measured within a certain displacement range. The static stiffness values measured in different displacement ranges are different, but some families require the change curve measured in the whole displacement range.

2. Dynamic stiffness: It refers to the ratio of the change of pressure (or tensile force) to the change of displacement of damping rubber in a certain displacement range and a certain frequency.

3. dynamic magnification: the ratio of the dynamic stiffness to the static stiffness measured by the damping rubber in a certain range of displacement.

4. Loss coefficient: There is a phase difference between the deformation of rubber and the stress of rubber in the course of the force acting on damping rubber, and the stress of rubber is generally ahead of the phase angle of the deformation of rubber.

5. Torsional stiffness: refers to the ratio of torsional moment to torsional angle of damping rubber within a certain range of torsional angle.

6. Durability: It refers to the number of times of vibration when the rubber is in good condition after n times of reciprocating vibration under certain preloading load, amplitude and vibration frequency in a certain direction.Thanks for the help and support of Chongqing Feilong Jiangli Auto Parts technical department.

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By 袁春凤 (Tiffany)
      What is an automobile shock absorber?
      In order to accelerate the vibration attenuation of the frame and body and improve the ride comfort of the vehicle, vibration absorbers are installed in the suspension system of most automobiles. Both the shock absorber and the elastic element are installed in parallel.
      Hydraulic shock absorbers are widely used in vehicle suspension systems. The principle of the hydraulic shock absorber is that the oil in the shock absorber shell flows repeatedly from one cavity to another through some narrow cavities when the piston moves in the cylinder cylinder when the driver and the bridge move reciprocating relative to each other. At this time, the friction between the hole wall and the oil and the internal friction of the liquid molecule form a damping force to the vibration, so that the vibration energy of the body and the frame is converted into heat energy, which is absorbed by the oil and shock absorber shell, and then emitted into the air. The damping force of the shock absorber increases or decreases with the relative velocity of the frame and the axle, and is related to the viscosity of the oil. Therefore, it is required that the viscosity of the oil used in the shock absorber should be as little as possible affected by the temperature change, and has the properties of anti-vaporization, anti-oxidation and non-corrosion to various metal and non-metal parts.

    • By 袁春凤 (Tiffany)
      Shock absorber
      In order to accelerate the vibration attenuation of the frame and body and improve the ride comfort of the vehicle, vibration absorbers are installed in the suspension system of most automobiles. Both the shock absorber and the elastic element are installed in parallel.
      Hydraulic shock absorbers are widely used in vehicle suspension systems. The principle of the hydraulic shock absorber is that the oil in the shock absorber shell flows repeatedly from one cavity to another through some narrow cavities when the piston moves in the cylinder cylinder when the driver and the bridge move reciprocating relative to each other. At this point, the friction between the hole wall and the oil and the friction between the liquid molecules form a damping force to the vibration, so that the vibration energy of the body and the frame can be converted into heat energy, which is absorbed by the oil and shock absorber shell, and then dispersed into the air. The damping force of the shock absorber increases or decreases with the relative velocity of the frame and the axle, and is related to the viscosity of the oil. Therefore, the viscosity of the oil used in the shock absorber is required to be as little as possible affected by temperature changes: and has the properties of anti-vaporization, anti-oxidation and non-corrosive to various metal and non-metal parts.
    • By 袁春凤 (Tiffany)
      Fatigue life prediction of rubber bushing in vehicle system
      1.Response analysis of rubber bushing under random excitation The Monte Carlo method is used to simulate the random excitation spectrum.
      2. The fatigue life calculation of rubber bushing under random load can calculate the maximum strain energy density of rubber bushing under different excitation by using the response characteristics of rubber bushing under engine and road excitation obtained previously. The fatigue life of rubber bushing can be calculated under different load conditions. The maximum strain energy density U = 0.5134Nmm2 and the fatigue life N = 771371 were predicted under the excitation of engine speed n = 3000r/min and class B pavement, while U = 0.6893Nmm2, N, = 146774 under the excitation of engine speed n = 3000/min and class D pavement.(Thanks for the help and support of Chongqing Feilong Jiangli Auto Parts technical department.)
      3. The test verification of the front sub-frame module is expensive because of the fatigue test of the whole vehicle system. Now the former sub-frame module is the research object, and the calculation results are compared with the test results. The front sub-frame is installed in accordance with its layout in the vehicle, and the six points connected with the body on the sub-frame are restrained. Sinusoidal excitation is carried out at the midpoint of the rear beam, and the maximum frequency which can be reached under the condition of satisfying the amplitude of the force is taken as the test frequency. The amplitude of force is 2.45.2kN. Fatigue failure criteria of rubber bushing: 2mm crack (equivalent to 20% of tensile coefficient).
    • By Erica Zhu Feilong Jiangli
      The greater the damping force of the shock absorber, the faster the vibration is reduced, but the effect of the parallel elastic elements can not be fully exerted. At the same time, the excessive damping force may also lead to damage to the connecting parts and frame of the shock absorber. In order to solve this contradiction between elastic elements and shock absorbers, the following requirements are put forward for shock absorbers.
      (1) In the compression stroke of the suspension, the damping force of the shock absorber should be small so as to make full use of the elasticity of the elastic elements to mitigate the impact.
      (2) In the suspension stretching stroke (the distance between the bridge and the frame) the damping force of the shock absorber should be large in order to reduce the vibration rapidly.
      (3) When the relative speed between the axle (or wheel) and the frame is too high, the shock absorber should be able to automatically increase the area of the liquid flow passage, so that the damping force is always within a certain limit to avoid excessive impact load.
      Cylinder shock absorber is widely used in automobile suspension system, and it can reduce vibration in compression and stretching stroke. It is called bidirectional action shock absorber, and a new type of shock absorber is adopted, which includes air-filled shock absorber and resistance adjustable shock absorber.

    • By Erica Zhu Feilong Jiangli
      In order to accelerate the vibration attenuation of the frame and body and improve the ride comfort of the vehicle, vibration absorbers are installed in the suspension system of most automobiles. Both the shock absorber and the elastic element are installed in parallel.
      Hydraulic shock absorbers are widely used in vehicle suspension systems. The principle of the hydraulic shock absorber is that the oil in the shock absorber shell flows repeatedly from one cavity to another through some narrow cavities when the piston moves in the cylinder cylinder when the driver and the bridge move reciprocating relative to each other. At this time, the friction between the hole wall and the oil and the internal friction of the liquid molecule form a damping force to the vibration, so that the vibration energy of the body and the frame is converted into heat energy, which is absorbed by the oil and shock absorber shell, and then emitted into the air. The damping force of the shock absorber increases or decreases with the relative velocity of the frame and the axle, and is related to the viscosity of the oil. Therefore, it is required that the viscosity of the oil used in the shock absorber should be as little as possible affected by the temperature change, and has the properties of anti-vaporization, anti-oxidation and non-corrosion to various metal and non-metal parts.
      https://s1.ax1x.com/2018/07/21/P8R9aQ.jpg
×

Copyright © 2018 AutoPartsForum.com Powered by Invision Community