Jump to content

  • Welcome to Auto Parts Forum

    Whether you are a veteran automotive parts guru or just someone looking for some quick auto parts advice, register today and start a new topic in our forum. Registration is free and you can even sign up with social network platforms such as Facebook, X, and LinkedIn. 

     

automobile shock absorber

袁春凤 (Tiffany)
 Share

Recommended Posts

袁春凤 (Tiffany) Enthusiast

袁春凤 (Tiffany)

Posted
Posted

What is an automobile shock absorber?

In order to accelerate the vibration attenuation of the frame and body and improve the ride comfort of the vehicle, vibration absorbers are installed in the suspension system of most automobiles. Both the shock absorber and the elastic element are installed in parallel.

Hydraulic shock absorbers are widely used in vehicle suspension systems. The principle of the hydraulic shock absorber is that the oil in the shock absorber shell flows repeatedly from one cavity to another through some narrow cavities when the piston moves in the cylinder cylinder when the driver and the bridge move reciprocating relative to each other. At this time, the friction between the hole wall and the oil and the internal friction of the liquid molecule form a damping force to the vibration, so that the vibration energy of the body and the frame is converted into heat energy, which is absorbed by the oil and shock absorber shell, and then emitted into the air. The damping force of the shock absorber increases or decreases with the relative velocity of the frame and the axle, and is related to the viscosity of the oil. Therefore, it is required that the viscosity of the oil used in the shock absorber should be as little as possible affected by the temperature change, and has the properties of anti-vaporization, anti-oxidation and non-corrosion to various metal and non-metal parts.

海报.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Content

  • Similar Topics

    • 袁春凤 (Tiffany)
      Friction of automobile parts
      By 袁春凤 (Tiffany)
      The phenomenon that two objects move relative to each other to produce motion resistance between their contact surfaces is called friction, which is called friction. The existence of friction not only increases the power consumption, but also causes the wear of parts' contact surfaces. Therefore, lubricating oil is usually used between the relative moving surfaces of automobile parts to reduce friction. Failure of automotive parts 75% is caused by friction.
      Friction can be divided into dry friction, liquid friction, boundary friction and mixed friction according to the lubrication state of the parts.
      (1) dry friction
      The friction between the frictional surfaces without any lubricating medium is called dry friction.
      When the parts are in the state of dry friction, the surface of the parts is abraded sharply, so the surface of the moving parts of the automobile should avoid the occurrence of dry friction as far as possible.
      Dry friction and boundary friction are the main friction between the upper part of cylinder wall and piston ring. Dry friction will occur when the journal and bearing are subjected to impact load in the working process.
      (2) liquid friction
      Two the friction of the friction surface when the lubricant is completely separated is called liquid friction.
      In liquid friction, the two friction surfaces are completely separated by a layer of lubricating oil film with a thickness of 1.5-2.0um, which avoids direct contact between the working surfaces of the two parts. Friction only occurs between the lubricating fluid molecules, so the friction resistance is very small, and the wear of the parts is very slight.
      Most of the relative motion parts of a car are carried out under the condition of liquid friction (for example, crankshaft and bearing).
      (3) boundary friction
      Two friction surface separated by a very thin boundary film is called boundary friction.
      The oil film thickness is usually below 0.1um. Friction only occurs between the outer molecules of the boundary film, reducing the friction and wear of the parts. But its thickness is very small, and it is easy to be destroyed by impact and high temperature, so it is not as reliable as liquid friction.
      For example: between cylinder wall and piston ring; if the work crankshaft and journal between the insufficient supply of lubricant, easy to produce boundary friction.
      (4) Mixed friction
      The friction between two friction surfaces in the presence of dry friction, liquid friction and boundary friction is called mixed friction.
      In the actual working state, the parts usually work under the mixed friction state, and the friction state varies with the working conditions.

    • Counterman
      ZF Expands SACHS CDC Shock Line for U.S., Canada
      By Counterman
      ZF Aftermarket announced the launch of 33 new part numbers in March for SACHS Continuous Damping Control (CDC) shock absorbers for approximately 1.6 million passenger vehicles in operation in the U.S. and Canada (USC). The new products expand ZF’s line of SACHS CDC shock absorbers by more than 70 percent, reflecting growing demand for advanced damping technology in the aftermarket, according to ZF.
      The CDC part numbers cover a variety of BMW and Audi models, among others. The CDC electronic damper system has been in large-scale original equipment production since the mid-2000s and is offered for many vehicles, from luxury cars to SUVs to compact cars. ZF said it has produced more than 35 million CDC dampers globally and plans to release additional CDC part numbers in the USC region throughout 2024.
      “Demand for continuous damping control shocks is skyrocketing in the USC aftermarket, so we’re very excited to deliver more of this advanced damping technology to our customers, and to continue building the SACHS CDC product line,” said Mark Cali, head of independent aftermarket, USC for ZF Aftermarket.
      The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view
    • OReilly Auto Parts
      Automotive Shock and Strut Overview | What do they do and why are they important?
      By OReilly Auto Parts
      Automotive Shock and Strut Overview | What do they do and why are they important?
    • Dorman Products
      Rear Crankshaft Oil Seal Installer - 635-000 #automobile #technician #gm #carrepair
      By Dorman Products
      Rear Crankshaft Oil Seal Installer - 635-000 #automobile #technician #gm #carrepair
    • Dorman Products
      Oil Pan Gasket Alignment Tool-45722 #automobile #technician #oilpan #headgasket
      By Dorman Products
      Oil Pan Gasket Alignment Tool-45722 #automobile #technician #oilpan #headgasket

×
×
  • Create New...