Quantcast
Jump to content
  • Welcome to Auto Parts Forum

    Whether you are a veteran automotive parts guru or just someone looking for some quick auto parts advice, register today and start a new topic in our forum. Registration is free and you can even sign up with social network platforms such as Facebook, Twitter, Google, and LinkedIn. 

     

Recommended Posts

Automotive engine bracket

Automobile engine bracket is a safe and functional part of powertrain mounting system. It must satisfy the strength of automobile under various driving conditions and the restraint mode of mounting bracket has a great influence on the noise inside the vehicle. If the design is unreasonable, the natural frequency of the mounting bracket I is too low and in the range of engine operating speed, the mounting bracket will produce resonance, which will increase the noise inside the vehicle. Therefore, modal is one of the important design indexes of mounting bracket. Taking the four-cylinder engine of passenger car as an example, according to the resonance theory, it is required that the natural frequency of the engine mounting bracket should be greater than 500 Hz, and the lowest should be greater than 400 Hz. In fact, due to the limitation of the layout space, the above requirements can not be met. The first order natural frequency should be increased as much as possible. Feilong Jiangli,40 years specialize in engine bracket, through the optimization design and modal analysis of the suspension bracket practice, summed up to improve the modal method, to provide a theoretical basis for design.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By 袁春凤 (Tiffany)
      According to foreign media reports, sales of light vehicles in the United States last year (2018) were not only higher than those in 2017, but also exceeded analysts' expectations, with a total of 17.3 million vehicles sold. However, analysts and industry observers again said that due to a variety of economic factors, the U.S. light vehicle market will show a downward trend in 2019, but the decline is relatively small.
      Many analysts expect U.S. light vehicle sales to range from 16.5 million to 17 million in 2019. J.D. Power expects between 16.9 million and 17 million vehicles, with retail sales of light vehicles between 13.6 million and 13.7 million.
      As in 2018, the relative strength of the U.S. economy masked concerns about new car prices and rising interest rates. But in addition to these, there will be other problems in 2019, such as the impact of tariff and tax reform.
      As a auto parts supplier, Chongqing Feilong Jiangli will keep up-to-date information on new information and new energy industries.
    • By 袁春凤 (Tiffany)
      Among the top three Japanese car companies, only Toyota did not intentionally rush towards the end of the year. This will leave more foreshadows for the upstream in 2019.
      According to Daily Automobile, Toyota's retail sales in China in December 2018 were 123,300, up 14.7% from 107,500 in December 2017.
      Toyota's retail sales in China totaled 1,474,500 units in 2018, compared with 1,290,000 units in 2017, an increase of 14.3% last year, which is the sixth consecutive year that Toyota's sales in China have increased year-on-year.
      Compared with Nissan and Honda, the other two giants in Japanese auto companies, Toyota showed a double connotation last month: not only were it less than 176,191 Nissan cars in absolute terms of sales, but it was far from 191,907 Honda cars. In terms of year-on-year growth, Nissan fell 4.4%, Honda surged 33.8%, and Toyota's 14.7% was in the middle.
      As a auto parts supplier, Chongqing Feilong Jiangli will keep up-to-date information on new information and new energy industries.
    • By Erica Zhu Feilong Jiangli
      Chongqing Feilong Jiang Li has an independent rubber and plastic workshop, which mainly produces body rubber products, such as bushings, sealing rings and so on. In order to better realize the process and satisfy the design concept, and to ensure the bushing in normal working state more effectively in the process of vehicle assembly, Chongqing Feilong Jiang Li will choose a suitable reference point as the initial zero angle of rubber bushing, which is regarded as the best working state of bushing. In order to keep the best working condition as long as possible, Feilong Jiangli will choose the most common working condition of the whole vehicle as the initial zero angle of the village set. Generally speaking, it is considered that the normal working condition of a car is no-load or half-load, that is to say, the landing state. The corresponding bushing assembly process at this time is called landing tightening technology, that is, tightening the rubber bushing after the vehicle landing. Feilongjiangli's rubber bushing is processed by ingredient, stamping and injection moulding. Each process has strict quality control procedures. The finished bushing is mainly used on Chang'an CS35 and CS75 models.
    • By 袁春凤 (Tiffany)
      Hydrogen induced wear: hydrogen is released during the friction due to mechanical and chemical action. Hydrogen diffuses into the deformed layer of metal surface, causing a large number of crack sources in the deformed layer. The generation and development of cracks make the surface material fall off, which is called hydrogen-induced wear. Oxygen may come from material itself or environmental medium, such as lubricating oil and water.

    • By 袁春凤 (Tiffany)
      The mechanism of cavitation is surface fatigue damage caused by impact force, but the chemical and electrochemical action of liquid and abrasive inclusion in liquid may accelerate cavitation damage. For example, the cylinder liner cavitation is caused by the action of piston lateral thrust because the combustion pressure in cylinder varies with crankshaft angle. The elastic deformation and high-frequency vibration of bubbles produce great impact force (tens or even tens of thousands of high pressure) and high temperature (hundreds of degrees) at the instant of collapse, and the collapse speed can reach 250m/s.
      Feilong jiangli will update analysis of more auto parts failure models.

  • Similar Topics

    • By Eliauk
      1.Difference between diesel powered refrigeration unit and engine driven refrigeration unit
      Diesel powered refrigeration unit: Independent and non-independent refrigeration units are divided according to power source. Independent refrigeration unit (Diesel powered refrigeration unit) means that the refrigeration unit has a separate power source and the unit itself has an independent power source.
      Generally speaking, diesel powered reefer unit is integrated structures, but there are also modified split structures (this structure is generally hoisted on the beam of the reefer truck). This type of unit itself has an engine and a generator that provide power and electricity to the refrigeration system Device. It can work independently without being restricted by the working state of the truck engine.
      Non-independent refrigeration unit (Engine driven refrigeration unit😞 As the name implies, it is a refrigeration unit that cannot work independently. This type of unit has no power unit and must rely on the truck engine to drive the compressor to work.
      The engine driven refrigeration unit can also be divided into an integral structure and a split structure from the structure. The split structure also includes three types of condenser front type, condenser top-mounted type and condenser bottom-mounted type (bottom-mounted or concealed); but the condenser front-mounted structure is the most common structure in split non-independent refrigeration units.

      2.Advantages and disadvantages of diesel engine refrigeration unit and engine driven refrigeration units
      Independent refrigeration unit
      Advantages: The advantage of diesel engine refrigeration unit is stability and reliability, which is also the most needed for refrigerated trucks. Since the diesel engine refrigeration unit has a separate source of power output, the refrigerator can still work when the refrigerated vehicle is turned off or the refrigerated vehicle has an engine failure, so as to ensure that the goods in the refrigerated vehicle will not deteriorate.
      Integrated independent refrigeration unit
      Disadvantages: The disadvantage of independent refrigeration units is that they are expensive and maintenance is more complicated than non-independent refrigeration units. Due to the addition of a set of power systems, independent refrigeration units are more complicated than non-independent refrigeration units in terms of maintenance, and independent refrigeration units are relatively more technically complex and more expensive.
      Non-independent refrigeration unit
      Advantages: The advantages of non-independent refrigeration units are low price, simple structure and easy maintenance.
      Disadvantages: The disadvantage of the non-independent refrigeration unit is that it relies too much on the power source of the refrigerated vehicle. When the refrigerated vehicle engine stops working, the non-independent refrigeration unit loses power support and the refrigeration system stops working. If the door is frequently opened when the vehicle is turned off, the large loss of cold air in the refrigerated box causes the temperature in the box to rise, or the refrigerator will stop cooling when the vehicle fails (engine failure), and the cargo in the vehicle is easily lost.
      3.Choice of independent refrigeration unit and non-independent refrigeration unit
      From the price point of view: If your budget is relatively sufficient and have strict temperature requirements (the required temperature should be at least minus 10 degrees below) ) It is recommended to use a diesel powered refrigeration unit.
      In terms of the length of transportation distance: For short-distance distribution within the city or between districts and counties, it is recommended to use non-independent units, which not only lower the procurement cost, but also easy to repair even if there is a failure; For long-distance transportation, it is recommended to use independent refrigeration units, because Even if the vehicle engine stops working during long-distance transportation, the refrigerator can still cool normally to ensure the safety of the transported items.
      In terms of vehicle models: Generally speaking, light trucks with a body less than 7 meters are recommended to use non-independent units. For trucks and semi-trailers above 7 meters, independent refrigeration units are better.
      If you have any questions, please feel free to contact us. [email protected]
    • By Auto News
      SPRINGFIELD, Mo., April 01, 2021 (GLOBE NEWSWIRE) -- O’Reilly Automotive, Inc. (the “Company” or “O’Reilly”) (Nasdaq: ORLY), a leading retailer in the automotive aftermarket industry, announces the release date for its first quarter 2021 results as Wednesday, April 28, 2021, with a conference call to follow on Thursday, April 29, 2021.
      View the full article
    • By Eliauk
      Truck refrigeration system consists of four parts: compressor, condenser, expansion valve and evaporator.
      transport refrigeration units
      1.compressor
      The compressor is the power of the refrigeration cycle and is driven by an electric motor to continuously rotate. It can not only extract the vapor in the evaporator in time, maintain low temperature and low pressure, but also increase the pressure and temperature of the refrigerant vapor through the compression function, creating conditions to transfer the heat of the refrigerant vapor to the external environment medium. In other words, the low-temperature and low-pressure refrigerant vapor is compressed to a high-temperature and high-pressure state, and room temperature air or water is used as a cooling medium to condense the refrigerant vapor.
       
      The function of the compressor is to compress low-pressure steam into high-pressure steam, thereby reducing steam volume and increasing pressure. The compressor sucks the working medium vapor with lower pressure from the evaporator, and sends it to the condenser after the pressure increases. The high-pressure liquid is condensed in the condenser. After being throttled by the throttle valve, it becomes a low-pressure liquid and is sent to the evaporator. In the evaporator, it absorbs heat and evaporates into low-pressure steam, which is then sent to the compressor inlet to complete the refrigeration cycle.
       
      2.Condenser
       
      The condenser is a heat exchange device that uses the ambient cooling medium (air or water) to take the heat of the high temperature and high pressure cooling steam from the cooling compressor, so that the high temperature and high pressure refrigerant vapor is cooled and condensed into a high pressure normal temperature refrigerant liquid. It is worth mentioning that in the process of transforming refrigerant vapor into refrigerant liquid, the pressure of the condenser is constant and still at high pressure.
       
      3.Throttle element (namely expansion valve)
       
      The high-pressure and normal-temperature refrigerant liquid is directly sent to the low-temperature scale evaporator. According to the corresponding principle of saturation pressure and saturation temperature, the pressure of the refrigerant liquid is reduced, thereby reducing the temperature of the refrigerant liquid. The high-pressure and normal-temperature refrigerant liquid passes through the throttling element of the decompression device to obtain a low-temperature and low-pressure refrigerant, which is sent to the evaporator to absorb heat and evaporate. In daily life, capillary tubes are often used as throttling elements for refrigerators and air conditioners.
       
      4.Evaporator
       
      The evaporator is also a heat exchange device. The low-temperature and low-pressure refrigerant liquid evaporates (boils) into steam after being throttled, absorbs the heat of the material to be cooled, reduces the temperature of the material, and achieves the purpose of freezing food. In the air conditioner, the surrounding air is cooled to cool and dehumidify the air. The lower the evaporation temperature of the refrigerant in the evaporator, the lower the temperature of the cooling substance. In the refrigerator, the evaporation temperature of the general refrigerant is adjusted to -26°C to -20°C, and in the air conditioner, it is adjusted to 5°C to -8°C.
       
      We have over 20 years history and are TOP 1 export manufacturer among all Chinese Truck refrigeration system Suppliers. We not only provide high quality products, but also provide Professional technical support, Timely after-sale service,big project developing support,Key client developing support and so on.
       
      We are seeking for dealer worldwide, welcome to visit our Truck refrigeration system factory to cooperate with us!
      transport refrigeration systems
      You are also welcome to follow Corunclima on Facebook& Linkedin!
       

      Truck refrigeration system V450F for midtrucks from 12-28m³
    • By Auto News
      SPRINGFIELD, Mo., March 26, 2021 (GLOBE NEWSWIRE) -- O’Reilly Automotive, Inc. (the “Company” or “O’Reilly”) (Nasdaq: ORLY), a leading retailer in the automotive aftermarket industry, today announced succession plans for its Chairman of the Board position. Subject to their election as directors at O’Reilly’s 2021 Annual Meeting of Shareholders (the “Annual Meeting”) to be held on May 13, 2021, and effective immediately following the Annual Meeting, the Company’s Board of Directors (the “Board”) has appointed Greg Henslee to the position of Executive Chairman of the Board (“Executive Chairman”) and David O’Reilly to the position of Executive Vice Chairman of the Board (“Executive Vice Chairman”). Mr. O’Reilly currently serves as Executive Chairman, and Mr. Henslee currently serves as Executive Vice Chairman.
      View the full article

×
  • Create New...