Quantcast
Jump to content

  • Welcome to Auto Parts Forum

    Whether you are a veteran automotive parts guru or just someone looking for some quick auto parts advice, register today and start a new topic in our forum. Registration is free and you can even sign up with social network platforms such as Facebook, Twitter, Google, and LinkedIn. 

     

Recommended Posts

Forging process foundation

Forging concept

Forging is a kind of forging method that produces partial or total plastic deformation of billet or ingot under the action of pressure equipment and tools to obtain certain geometry, size and quality. Forging methods: free forging, die forging, die forging, rolling, drawing, extrusion and so on. Among them, free forging and die forging are the most commonly used forging methods.

Characteristics and application of forging

Improve the internal structure of metal and improve the mechanical properties of metal. Besides free forging, it has higher labor productivity. Save metal materials. It is difficult to forge workpieces with complex shape and inner cavity. Forging is generally used in the manufacture of high strength, good reliability of automotive parts, such as: engine crankshaft, camshaft, connecting rod, chassis drive shaft, cross shaft, front axle, rear axle, steering system knuckle, steering knuckle arm.

海报.jpg

Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Similar Content

    • By 袁春凤 (Tiffany)
      According to foreign media reports, sales of light vehicles in the United States last year (2018) were not only higher than those in 2017, but also exceeded analysts' expectations, with a total of 17.3 million vehicles sold. However, analysts and industry observers again said that due to a variety of economic factors, the U.S. light vehicle market will show a downward trend in 2019, but the decline is relatively small.
      Many analysts expect U.S. light vehicle sales to range from 16.5 million to 17 million in 2019. J.D. Power expects between 16.9 million and 17 million vehicles, with retail sales of light vehicles between 13.6 million and 13.7 million.
      As in 2018, the relative strength of the U.S. economy masked concerns about new car prices and rising interest rates. But in addition to these, there will be other problems in 2019, such as the impact of tariff and tax reform.
      As a auto parts supplier, Chongqing Feilong Jiangli will keep up-to-date information on new information and new energy industries.
    • By 袁春凤 (Tiffany)
      Among the top three Japanese car companies, only Toyota did not intentionally rush towards the end of the year. This will leave more foreshadows for the upstream in 2019.
      According to Daily Automobile, Toyota's retail sales in China in December 2018 were 123,300, up 14.7% from 107,500 in December 2017.
      Toyota's retail sales in China totaled 1,474,500 units in 2018, compared with 1,290,000 units in 2017, an increase of 14.3% last year, which is the sixth consecutive year that Toyota's sales in China have increased year-on-year.
      Compared with Nissan and Honda, the other two giants in Japanese auto companies, Toyota showed a double connotation last month: not only were it less than 176,191 Nissan cars in absolute terms of sales, but it was far from 191,907 Honda cars. In terms of year-on-year growth, Nissan fell 4.4%, Honda surged 33.8%, and Toyota's 14.7% was in the middle.
      As a auto parts supplier, Chongqing Feilong Jiangli will keep up-to-date information on new information and new energy industries.
    • By Erica Zhu Feilong Jiangli
      Chongqing Feilong Jiang Li has an independent rubber and plastic workshop, which mainly produces body rubber products, such as bushings, sealing rings and so on. In order to better realize the process and satisfy the design concept, and to ensure the bushing in normal working state more effectively in the process of vehicle assembly, Chongqing Feilong Jiang Li will choose a suitable reference point as the initial zero angle of rubber bushing, which is regarded as the best working state of bushing. In order to keep the best working condition as long as possible, Feilong Jiangli will choose the most common working condition of the whole vehicle as the initial zero angle of the village set. Generally speaking, it is considered that the normal working condition of a car is no-load or half-load, that is to say, the landing state. The corresponding bushing assembly process at this time is called landing tightening technology, that is, tightening the rubber bushing after the vehicle landing. Feilongjiangli's rubber bushing is processed by ingredient, stamping and injection moulding. Each process has strict quality control procedures. The finished bushing is mainly used on Chang'an CS35 and CS75 models.
    • By 袁春凤 (Tiffany)
      Hydrogen induced wear: hydrogen is released during the friction due to mechanical and chemical action. Hydrogen diffuses into the deformed layer of metal surface, causing a large number of crack sources in the deformed layer. The generation and development of cracks make the surface material fall off, which is called hydrogen-induced wear. Oxygen may come from material itself or environmental medium, such as lubricating oil and water.

    • By 袁春凤 (Tiffany)
      The mechanism of cavitation is surface fatigue damage caused by impact force, but the chemical and electrochemical action of liquid and abrasive inclusion in liquid may accelerate cavitation damage. For example, the cylinder liner cavitation is caused by the action of piston lateral thrust because the combustion pressure in cylinder varies with crankshaft angle. The elastic deformation and high-frequency vibration of bubbles produce great impact force (tens or even tens of thousands of high pressure) and high temperature (hundreds of degrees) at the instant of collapse, and the collapse speed can reach 250m/s.
      Feilong jiangli will update analysis of more auto parts failure models.

  • Similar Topics

    • By 袁春凤 (Tiffany)
      Free forging
      Definition of free forging Free forging is the use of impact force or pressure on the metal between the top and bottom of the anvil free form in all directions, without any restrictions to obtain the desired shape, size and certain mechanical properties of the forging method.
      Free forging equipment
      The equipment of free forging can be divided into two categories: forging hammer and hydraulic press. The hammer used in production is air hammer and steam air hammer. Hydraulic press is the only way to produce large forgings by using static pressure generated by liquid to deform the blank.
      Basic process of free forging
      Rough upsetting is a forging process which makes the cross section of billet larger and the height smaller. There are two kinds of upsetting: integral upsetting and partial upsetting. Drawing and drawing is the opposite of upsetting. It is a forging process to increase the length of the billet and reduce the cross section. The punching process of punching holes or blind holes on billets is called punching. The characteristics of free forging and the application of free forging depend on manual operation to control the shape and size of forgings. Therefore, the forgings have low precision, large machining allowance, high labor intensity and low productivity. Therefore, it is mainly used in single-piece and small-batch production with simple structure and shape of forgings.
    • By Erica Zhu Feilong Jiangli
      Free forging is a kind of forging method which uses impact force or pressure to make the metal form freely in all directions between the top and bottom of the anvil surface without any restriction to obtain the required shape, size and certain mechanical properties of the forging.
      The equipment of free forging can be divided into two categories: forging hammer and hydraulic press. The hammer used in production is air hammer and steam air hammer. Hydraulic press is the only way to produce large forgings by using the static pressure generated by liquid to deform the blank.
      Basic process of free forging
      (1) The upsetting-one upsetting is a forging process which makes the cross-section of blank larger and the height smaller. There are two kinds of upsetting: integral upsetting and partial upsetting. (2) Drawing-drawing is contrary to upsetting, and is a forging process which makes the length of blank increase and the cross section decrease.
      (3) The punching process of punching holes or blind holes on billets.
      Characteristics and application of free forging
      Free forging is to control the shape and size of forgings by manual operation, so the forgings have low precision, large machining margin, high labor intensity, and low productivity. Therefore, it is mainly used in single-piece and small-batch production with simple structure and shape of forgings.

    • By Erica Zhu Feilong Jiangli
      Stamping technology is an advanced metal processing method. It is based on the plastic deformation of metal. It uses dies and stamping equipment to exert pressure on the sheet metal under normal temperature conditions, so that the sheet metal produces plastic deformation or separation, so as to obtain parts with certain shape, size and performance. Stamping technology is widely used in automobile industry, and is the key technology in automobile body manufacturing.
      Stamping features:
      (1) it is easy to operate, easy to realize mechanization and automation, and has high productivity.
      (2) The dimension precision of the part is guaranteed by the mould. Generally, it can be used for assembly without cutting, so the quality is stable.
      (3) it is possible to obtain parts with complex shapes which cannot be machined or processed by other metal processing methods.
      (4) Generally, it does not need to heat the blank, nor does it need to remove a large number of metals like cutting, so it not only saves energy, but also has a high utilization rate of materials.
      (5) The raw materials used are rolled sheets or strips, and the surface of the material is generally not damaged during the stamping process, so the surface quality of the stamping parts is better.
      The stamping process is carried out on punching presses or presses. Special punching tools are equipped on punching presses or presses.

    • By Erica Zhu Feilong Jiangli
      The stamping process can be divided into different classes according to different standards.
      (1) according to the different deformation properties, it can be divided into separation process and forming process.
      Separation process: the material is processed under external force to produce deformation, as used in the deformation part of the equivalent stress reached the shear strength of the material, the material will produce shear cracking and separation, thus forming a certain shape and size of the parts. These stamping processes are generally referred to as separation processes, such as tailoring, punching, blanking, and cutting.
      Forming process: under the action of external force, the equivalent stress acting on the deformed part of the material is between the yield limit and the strength limit of the material. The material only produces plastic deformation, so as to obtain a certain shape and size of the parts. These stamping processes are collectively called forming processes, such as bending, drawing, forming and other deformation processes.
      (2) according to the basic deformation mode, it can be divided into blanking, bending, drawing and forming.
      Punching: Punching, such as punching, blanking, etc., is a process in which materials are cut apart along closed or non-closed contours.
      Bending: The stamping process of bending a material into an angle or shape is called bending, such as bending, crimping, twisting, etc.
      Drawing: The process of drawing a flat blank into a hollow part, or further changing the shape and size of the hollow part with a drawing die, is called drawing. There are thinner drawing and thinner drawing.
      Forming: The stamping process that causes material to deform locally to change the shape of a part or blank is called forming, such as flanging, shrinkage, etc.

    • ALLDATAdiy.com - Leading source of online automotive diagnostic & repair information! Shop now
    • By 袁春凤 (Tiffany)
      The stamping process can be divided into different classes according to different standards.
      (1) according to the different deformation properties, it can be divided into separation process and forming process.
      Separation process: the material is processed under external force to produce deformation, as used in the deformation part of the equivalent stress reached the shear strength of the material, the material will produce shear cracking and separation, thus forming a certain shape and size of the parts. These stamping processes are generally referred to as separation processes, such as tailoring, punching, blanking, and cutting.
      Forming process: under the action of external force, the equivalent stress acting on the deformed part of the material is between the yield limit and the strength limit of the material. The material only produces plastic deformation, so as to obtain a certain shape and size of the parts. These stamping processes are collectively called forming processes, such as bending, drawing, forming and other deformation processes.
      (2) according to the basic deformation mode, it can be divided into blanking, bending, drawing and forming.
      Punching: Punching, such as punching, blanking, etc., is a process in which materials are cut apart along closed or non-closed contours.
      Bending: The stamping process of bending a material into an angle or shape is called bending, such as bending, crimping, twisting, etc.
      Drawing: The process of drawing a flat blank into a hollow part, or further changing the shape and size of the hollow part with a drawing die, is called drawing. There are thinner drawing and thinner drawing.
      Forming: The stamping process that causes material to deform locally to change the shape of a part or blank is called forming, such as flanging, shrinkage, etc.

×
  • Create New...