-
Welcome to Auto Parts Forum
Whether you are a veteran automotive parts guru or just someone looking for some quick auto parts advice, register today and start a new topic in our forum. Registration is free and you can even sign up with social network platforms such as Facebook, X, and LinkedIn.
-
Similar Topics
-
By NAPA
Chase Elliott and the No. 9 link hidden, please login to view team qualified 29th for Sunday’s NASCAR Cup Series race at Dover Motor Speedway. Elliott showcased a 16-position gain by lap 60 en route to a ninth-place result in stage one and followed that up with a fifth-place finish in stage two. The 28-year-old driver remained in the top 10 during the final stage, ultimately finishing the 400-lap race in the fifth position. The 2020 NASCAR Cup Series champion ranks third in the points standings, just 33 markers behind the leader. Following Saturday’s practice and qualifying sessions at Dover Motor Speedway, Chase Elliott started Sunday’s NASCAR Cup Series race 29th. At the start of the scheduled 400-lap race, Elliott navigated among the surrounding cars, advancing to 20th by lap 39 before the first caution waved over the field. Under the caution, Elliott brought the No. 9 NAPA Auto Parts Chevrolet Camaro ZL1 to pit road for four tires, fuel and air pressure adjustments. Unfortunately, when exiting pit road, he made contact with a competitor but sustained no damage. On lap 48, Elliott took the green from the outside lane in the 15th position. Progressing steadily, he maneuvered to 13th halfway through stage one, making a gain of 16 positions at the “Monster Mile.” Continuing his charge, the 28-year-old driver entered the top 10 behind Hendrick Motorsports teammate Alex Bowman with 46 laps to go in the stage. As the first stage drew to a close, another caution came out with two laps to go, ultimately leading to a ninth-place finish for Elliott under the yellow flag on lap 120.
Amid the caution, Elliott communicated to the No. 9 team that his Chevrolet experienced some tightness when near to his competitors. On lap 123, he pitted for four tires, fuel and air pressure adjustments. When the green flag waved on lap 130, Elliott resumed in the ninth position. Shortly after the restart, the Dawsonville, Georgia, native reported that he got into the wall, but No. 9 crew chief Alan Gustafson reassured him that the NAPA Auto Parts Chevy was good and had no visible damage. On lap 182, Elliott visited pit road for fresh tires and fuel as green-flag pit stops were underway. He raced inside the top 10 as the pit cycle continued and advanced to the top five in the closing laps of the second stage. Ultimately, he took the green-and-white checkered flag in the fifth position on lap 250.
During the stage break, Elliott expressed confidence in his No. 9 NAPA Auto Parts Chevrolet, stating that he felt “just as good as everyone else” before pitting for four tires and fuel on lap 253. As the green flag waved for the start of the final stage on lap 259, Elliott was in the fifth position and continued to battle inside the top 10 until green-flag pit stops began. Elliott pitted for more tires and fuel on lap 320, but following his return to the track, a caution came out. Leveraging the No. 9 team’s strategy, Elliott stayed out during the caution, along with other drivers who had already pitted, which put him in the fourth spot for the restart. Following another caution, the green flag waved again on lap 339, with Elliott placed fifth. Demonstrating resilience, Elliott fended off his competitors to secure a top-five finish, taking the checkered flag in the fifth position at the conclusion of Sunday’s race on lap 400.
Elliott leaves Dover Motor Speedway third in the Cup Series points standings, just 33 markers behind the leader.
“I was really happy with our car, honestly. A couple of moves here or there… I needed to just get myself a little further forward. But I’m really happy with the NAPA Chevy. We had a really solid day, and it was fun. It’s always fun when you can pass your way to the front.”
Start / Finish: 29 / 5
Points Standing / Total: 3rd / 377 pts. (-33)
Next Race: Sunday, May 5, Kansas Speedway
How to Watch or Listen: 3:00 p.m. ET on FS1, MRN or SiriusXM
NAPA:
link hidden, please login to view
Chase Elliott: link hidden, please login to view
Hendrick Motorsports: link hidden, please login to view
No. 9 Team: link hidden, please login to view The post
link hidden, please login to view appeared first on link hidden, please login to view.
link hidden, please login to view -
-
By NAPA
Chase Elliott and No. 9 link hidden, please login to view team qualified fifth for Sunday’s NASCAR Cup Series race at Bristol Motor Speedway In a race where tire management was key, the 28-year-old driver persevered to earn the No. 9 team’s first top-10 result of the season and his third straight top-10 at Bristol The 2020 Cup Series champion led twice for a total of five laps on the day – including the 80,000th lap for Hendrick Motorsports in the sport’s premier series – en route to an eighth-place finish Elliott and the No. 9 team leave Bristol sixth in the Cup Series points standings Chase Elliott earned a fifth-place starting position in Sunday’s NASCAR Cup Series race at Bristol Motor Speedway. Once the green flag dropped, Elliott held his own inside the top 10 and advanced to third before the first caution of the race came out on lap 22. Under the yellow, Elliott reported that the right front was “taking a beating” but that the No. 9 NAPA Auto Parts Chevrolet Camaro ZL1’s balance was spot on for the current track conditions. Crew chief Alan Gustafson called his driver to pit road for right-side tires and fuel. Elliott restarted fourth on lap 30 and was running in the same position when the caution flag waved again just two laps later. Staying out, he restarted fourth on lap 38 and charged to the lead on lap 61. Elliott stayed out front for four laps, earning Hendrick Motorsports its 80,000th lap led in the Cup Series in the process. When the race slowed for a caution on lap 71, Elliott was scored in the fourth position. He reported to his team that the NAPA Chevrolet was having some voltage issues, but he was ultimately able to remedy it without the team needing to make repairs. Elliott brought the NAPA Chevy to pit road for four tires and fuel. A fast stop by the No. 9 crew gained Elliott a spot on pit road and he lined up third for the restart on lap 79. The Hendrick Motorsports driver held strong inside the top 10 for several laps, but as the run went on Elliott began to get too much wear on his tires and he slid back to 15th to end the first stage.
Gustafson called Elliott to pit road during the stage break for four tires and fuel. Following the stop, the team examined the tires and discovered that both right-side tires were corded – something that a majority of the field was also dealing with. Elliott started the second stage from 13th on lap 140. For several laps, cars ran double file and Elliott was stuck on the outside. At the time of the lap-177 caution, Elliott was scored 23rd. He relayed to his team that he felt that a lot of his competitors were running too hard at the start and that he was trying to protect his tires. After stopping for fresh tires and fuel, Elliott restarted 20th and improved to 17th before the yellow flag was displayed on lap 228. He radioed that he was happy with his NAPA Chevy’s balance. When Elliott came to pit road for four tires and fuel, there was trouble on the pit stop that dropped Elliott deep in the field. Once the race was back to green, he maneuvered his way to 22nd before the green-and-white checkered flag waved to end stage two at lap 250.
After receiving four fresh tires, the Dawsonville, Georgia, native took the green flag for the final stage from 18th. However, the NAPA Chevy was too tight during the run and Elliott dropped to 30th as he hurt the right-rear tire trying to make his car turn. When a caution came out on lap 311, the team took the opportunity to make a chassis adjustment to the No. 9 during the four-tire stop. Elliott restarted 27th and was up to 25th when the final yellow flag of the race waved at lap 369. The six-time National Motorsports Press Association Most Popular Driver Award winner brought the No. 9 Chevy to the attention of the pit crew for a fresh set of tires. He was scored 23rd after the pit stop and advanced inside the top 20 after the race went back to green. Elliott methodically pressed forward and broke into the top 10 on lap 432. During the long green-flag run, the team opted to stay out on the track longer than most. Elliott made his way to fifth before coming to pit road for his final pit stop of the day on lap 447. Once pit stops cycled through, he was scored in the 11th position. With fresher tires than some of his competitors, he continued to gain spots in the final laps to take the checkered flag eighth. It was his third straight top-10 finish on the high-banked concrete oval.
Elliott and the No. 9 team leave Bristol sixth in the Cup Series points standings, just 33 markers behind the leader.
“Normally, you could just bury the car into the corner so far and you don’t ever really get beat by guys with tires that bad,” Elliott said, describing what made the race so challenging. “You could just fall off a cliff there with the way that was. It was like racing at a really old, worn-out short track. It was a lot of fun. I think there was probably a little better balance somewhere up there, but I had a good time.”
Start / Finish: 5 / 8
Points Standing / Total: 6th / 152 pts. (-33)
Next Race: Sunday, March 24, Circuit of the Americas
How to Watch or Listen: FOX, PRN or SiriusXM
NAPA:
link hidden, please login to view
Chase Elliott: link hidden, please login to view
Hendrick Motorsports: link hidden, please login to view
No. 9 Team: link hidden, please login to view The post
link hidden, please login to view appeared first on link hidden, please login to view.
link hidden, please login to view -
By NAPA
When it comes to working in the shop, personal safety should always be the top priority. Safety glasses, gloves, hearing protection, even work boots are all meant to keep your body protected. It should come as no surprise that with new hybrid and electric drivetrains, there are also new safety gear requirements. Insulated tools are just the start of a well-stocked shop. There’s more to electrical safety than just owning a set of
link hidden, please login to view. This expert advice is meant to give an overview of the kinds of general
link hidden, please login to view (PPE) needed to service hybrid and electric vehicles. It is important to follow proper repair procedures for these vehicles, as described in the vehicle specific repair manual. This includes using all required PPE listed in the repair procedure with no exceptions. If you do not have ALL of the necessary PPE, DO NOT proceed with a repair, as doing so could lead to severe injury or even death. Now that you have an idea of the serious nature of vehicle high-voltage electrical systems, let’s take a look at how you can protect yourself. Personal Protection
Wearing the right personal protection gear is a must when working with electric and hybrid vehicle high-voltage systems. The electrical energy stored in a typical main traction battery pack is more than enough to kill or seriously injure a person.
In the past, wearing gloves while working on a car was usually a personal preference. Today, when working on high-voltage electrical systems, wearing gloves is mandatory. And not just one pair of gloves, but two pairs (inner and outer) are to be worn together. Just in case you are wondering, welding gloves are NOT the same as high-voltage
link hidden, please login to view. Class 0 gloves are required for protection up to 1,000 volts AC and 1,500 volts DC. One pair of rubber gloves (inner) protects against electric shock, while the leather gloves (outer) protect the rubber gloves from mechanical wear. They must be worn together in order to perform correctly. Electrical gloves
link hidden, please login to view every six months to ensure they are still capable of insulating the user from the rated voltage. Gloves will be labeled with the test date near the cuff. The exact personal protection gear needed for a repair will be spelled out in the vehicle service repair manual procedures. This may include an insulated apron,
link hidden, please login to view, insulated arm sleeves, link hidden, please login to view, arc flash face shield with neck protection, and insulated mats or blankets. These layers of protection are necessary not just for avoiding shocks, but also potential explosions like an arc flash. Tool Safety
It may seem odd to consider hand tools as part of personal protection equipment, but that is exactly the case when working with electricity. Most ordinary hand tools are made from metal, which does an excellent job conducting electricity. For servicing high-voltage electrical systems tools need to be designed in such a way that they don’t provide a path for electricity to travel to the technician, or to other vehicle components. That’s why EV tools are specially designed to protect the technician when used properly.
An EV tool set is a must-have for any technician looking to service an electric vehicle. A good start for insulated hand tools is an insulated screwdriver set, an
link hidden, please login to view and an link hidden, please login to view. Electric vehicle tools used for diagnostics need to handle higher voltages, like this link hidden, please login to view. For repairs where the battery pack must be removed, special care must be taken due the extreme weight involved. A link hidden, please login to view is the proper way to lower and transport a hybrid or electric vehicle battery pack. You wouldn’t pull an engine out of a car without the proper lifting equipment, so give the same respect to a heavy traction battery pack. Work Space Safety
Normally, when a car is being worked on in a service bay, there is little danger to fellow technicians. But that isn’t the case with a modern electric or hybrid vehicle. Whenever the high-voltage electrical system on one of these vehicles is exposed, proper notification must be given to those working in the area. Place
link hidden, please login to view and link hidden, please login to view around the vehicle whenever the high voltage electrical system is being serviced. This warns other technicians that there is an electrical shock hazard in the shop, and to keep their distance. You may also place an electrical warning sign on the vehicle to signal to everyone in the shop to stay away. Part of your workspace safety gear must be an
link hidden, please login to view. If a technician suffers an electrical accident while working on a vehicle, anyone attempting to help them is also in danger of electric shock. An insulated safety hook must be used to separate the victim from the electrical source. The last tip for work space safety is to never work on an electric or hybrid vehicle alone. Always let another technician or coworker know you are working on a high-voltage electrical system, and to check in on you periodically. Training Is The Key To Safety
Working on hybrid and electric vehicle high voltage systems requires meticulous procedures and extensive training. While there are plenty of dangers when working on internal combustion vehicles, many of the safety procedures surrounding those vehicles have been known for decades. As EV and hybrid drivetrain become more mainstream, so will their service safety procedures.
Tackling hybrid and electric vehicle high-voltage system repairs isn’t impossible, but there must be dedication to proper training. If you are a technician (or are wanting to become a technician), and are looking for electric vehicle service training,
link hidden, please login to view can help. NAPA Auto Tech offers a wide variety of convenient, cost-effective ways to become an automotive professional. In addition to eLearning and instructor-led training, NAPA Auto Tech offers hands-on and seminar-style classes for almost every make and model to help technicians keep their skills up to date. Photos courtesy of Brian Medford.
The post
link hidden, please login to view appeared first on link hidden, please login to view.
link hidden, please login to view 
-
By Counterman
The Auto Care Association announced it has been
link hidden, please login to view. “This prestigious award is a testament to the association’s commitment to creating an inclusive, supportive and dynamic work environment for its employees,” Auto Care said in a news release.
With a remarkable 95% of employees affirming that the Auto Care Association is a great place to work, the organization stands out significantly above the national average. This recognition is based on direct feedback from employees, provided as part of the Great Place to Work’s rigorous, data-driven methodology.
The survey highlighted several areas where the Auto Care Association excels, including management’s approachability, effective coordination and assignment of tasks and the provision of necessary resources and equipment to employees.
Headquartered in Bethesda, Maryland, the Auto Care Association employs more than 40 U.S.-based workers and is renowned for its advocacy, educational, networking, technology and market-intelligence resources. It plays a pivotal role in the automotive aftermarket, driving innovation and competitiveness through its evaluation of market trends and development of new tools to adapt to evolving patterns.
“This certification is not just a milestone for our association but a reflection of the hard work, dedication, and passion of our team,” said Bill Hanvey, president and CEO of the Auto Care Association. “We are deeply committed to ensuring our workplace is not only rewarding and supportive but also fosters the growth and development of all our employees.”
The Auto Care Association added that its “culture is built on a foundation of mutual respect, collaboration and a shared vision for the future of the automotive aftermarket.”
Auto Care uses the acronym TCIF to summarize its corporate values. It stands for Teamwork, Curiosity, Integrity and Fun. These values “have cultivated a workplace where 97% of employees feel management is approachable and hires people who fit well within the organization,” according to Auto Care.
“Great member service starts with a strong internal foundation,” said Lea Diamond, vice president, people operations, for the Auto Care Association. “Our strengths internally are reflected in the level of service and care we provide to our members and the industry.”
The post
link hidden, please login to view appeared first on link hidden, please login to view.
link hidden, please login to view
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.