By
NAPA
link hidden, please login to view
Your
link hidden, please login to view is one of the most important liquids in your vehicle. Brake fluid is what transmits your foot’s movement of pressing on the brake pedal into movement of the friction material at the wheel. It is rarely seen unless you check their brake fluid level or are unlucky enough to have a brake system leak. But your brake fluid is not immortal and needs changed just like any other automotive fluid. Your owner’s manual lists how often to flush brake fluid for a reason, so let’s take a look at how to flush brake fluid.
Why Flush Fluid Brake Fluid?
Just like every other automotive fluid, brake fluid changes as time passes. In the case of brake fluid, it gets contaminated.
link hidden, please login to view is hygroscopic, meaning it absorbs water. That’s bad because if the water content in the brake fluid gets too high, it might boil under heavy braking. Brake fluid can also become contaminated with rust and copper.
Brake Fluid Flush Preparation
Before starting a brake flush, you need to take these first no matter which type of brake flush method you choose:
Turn off the ignition of the vehicle.
Using a vacuum bulb or similar siphon, remove almost all of the old brake fluid from the brake fluid reservoir. Leave a shallow puddle of it to prevent air from entering the brake system.
Top off the brake reservoir with fresh brake fluid.
Lift the vehicle off the ground and support it on jack stands. Never work under a vehicle that is only supported by a jack. A jack is a lifting device only, a jack stand is a support device.
Remove the tires and wheels. If possible, remove all four wheels, but you may also flush one wheel at a time.
Place a drain pan under each wheel that you flush to catch the brake fluid as it drips.
Once these steps are completed, you can move on to the brake flush method of your choice.
Gravity Brake Flush
With this method you let gravity do all the work. The tradeoff is that it takes more time than any other method.
Open the brake bleeder valve on each wheel
The brake fluid will drip from the open bleeder valves
Keep the brake reservoir filled with fresh brake fluid
Wait for the fluid dripping from the bleeder valve to run clear (this may take more than an hour)
Once the brake fluid runs clear, close the bleeder valve
Top off the brake fluid reservoir if necessary
Manual Brake Flush
This is the method most people think of when bleeding or flushing brakes. One person sits in the driver’s seat working the brake pedal while another person opens up the bleeder valves.
Have an assistant sit in the driver’s seat
Choose a wheel and locate the brake bleeder valve
Ask the assistant to pump the brake pedal three times and then hold it down
Open the brake bleeder valve to release the pressurized fluid
Close the brake bleeder valve
Check the brake fluid reservoir and top it off with fresh fluid if necessary
Repeat steps 3–6 until the fluid is clear
Top off the brake fluid reservoir if necessary
Pressure Brake Flush
Pressure brake fluid tools have become increasingly popular. This brake fluid flush tool uses pressurized air to push brake fluid through the system.
Read the instructions included with the pressure brake fluid tool
Fill the pressure brake fluid tool with fresh brake fluid as directed in the tool instructions
Attach the pressure adapter to the brake fluid reservoir
Pressurize the tool as directed in the tool instructions
Open the brake bleeder valve to release the pressurized fluid, and allow the fluid to flow until it is clear
Close the brake bleeder valve
Top off the brake fluid reservoir if necessary
Vacuum Brake Flush
As the name implies, this method uses a vacuum tool to pull brake fluid through the system. It is usually part of a
link hidden, please login to view that includes a brake fluid catch bottle.
Read the instructions included with the vacuum brake fluid tool
Attach the vacuum brake fluid tool to the brake bleeder valve
Pump the vacuum brake fluid tool to create vacuum at the brake bleeder valve
Open the brake bleeder valve to begin pulling brake fluid through the system
Allow the brake fluid to flow until it is clear
Close the brake bleeder valve
Check the brake fluid reservoir and top it off with fresh fluid if necessary
Repeat steps 3–7 until the fluid is clear
Top off the brake fluid reservoir if necessary
Regardless of which
link hidden, please login to view you choose, the goal is to replace as much old fluid as possible. You will likely use more brake fluid than you expect, but considering the long service interval, it is worth using a bit more fluid just to make certain. There is no difference between a brake fluid change vs. flush, they are the same process with the same goal: new brake fluid.
The cost to flush brake fluid depends on who is doing the work. A DIY brake flush at home will only cost you the price of a few bottles of brake fluid, but a professional brake fluid flush using specialized equipment will likely put the cost at more than $100.
Check out all the
link hidden, please login to view available on
link hidden, please login to view or trust one of our 17,000
link hidden, please login to view for routine maintenance and repairs. For more information on how to do a brake fluid flush and a typical brake fluid flush price, chat with a knowledgeable expert at your
link hidden, please login to view.
You Might Need These
link hidden, please login to view
link hidden, please login to view
link hidden, please login to view
link hidden, please login to view
link hidden, please login to view
link hidden, please login to view
The post
link hidden, please login to view appeared first on
link hidden, please login to view.
link hidden, please login to view
By Counterman
By NAPA
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.