Jump to content

Recommended Posts

Posted

rssImage-7568db4737b8e7ca307039de8656a683.jpeg

Where have all the small vehicles gone? In the past decade, the average American car has grown in size by approximately 15%, increasing by a foot in width, and nearly two feet in length. You may have noticed lately that it is more difficult to park at the local shopping center, or especially when surrounded by outsized pickup trucks at home-improvement stores. Parking spaces are, on average, 9×18 feet, leaving precious little room to open doors, much less slip in and out of your car. 

While the shift to ever-larger vehicles is primarily a reflection of American consumer tastes, the disappearance of compact vehicles from dealer lots has a few other hidden causes. For the manufacturer, these larger vehicles with their luxurious and technological features are simply more profitable. While these vehicles initially cost more to produce, the added value of these features allow for a higher margin, when compared to the compact tin-cans we tend to think of as “economy cars.” We don’t expect as much flavor from a fast-food hamburger as we do from a fancy filet at an expensive steakhouse, and we aren’t generally willing to pay top-shelf prices for a basic burger. The traditional “small car” buyer tends to be younger and less affluent, limiting the amount of money they are willing to spend on acquiring such basic transportation, and often more likely to purchased a used car (with more desirable features) at a similar price point.

Compact, fuel-efficient cars were born of a need for economy at a time when fuel prices soared, and emissions regulations restricted manufacturers’ ability to offer the gas-guzzling land yachts which had dominated the highways since the 1950s. For manufacturers to meet Corporate Average Fuel Economy (CAFE) standards, they needed these cheap little cars to offset the pollution and inefficiency inherent in their more popular vehicles. Sold at razor-thin margins (or even at a loss), these were never centers of profit, but they allowed manufacturers a way to boost their average fuel economy numbers without sacrificing sales of those bigger, more well-appointed vehicles which bring in the bigger dollars. 

While the shift to ever-larger vehicles is primarily a reflection of American consumer tastes, the disappearance of compact vehicles from dealer lots has a few other hidden causes.

As hybrid and EV technologies have improved (and been more widely accepted), manufacturers have discovered that meeting updated CAFE standards can be achieved through increasing sales of larger, feature-packed electrified vehicles, rather than giving away econo-boxes at or below cost. Customers still receive the “biggest and the best” as part of their driving experience, while the manufacturer enjoys increased profitability. Rather than selling vehicles at two extreme ends of the spectrum, there has been a shift toward more (mostly larger) vehicles landing in the middle of the “miles-per” range, pleasing buyers, manufacturers and the government regulators. 

From a distance, this seems to be a “win-win” scenario, but there are a few consumer groups left out of this “bigger is better” equation. Smaller vehicles, in more ways than one, are still a better “fit” for many urban commuters. Crowded streets and limited parking make compact vehicles more inviting for city-dwellers. And, for supercommuters (driving 50 or more miles daily), these small vehicles still offer desirable fuel economy. Additionally, the “super-sizing” of the American-market pickup has left many casual truck owners behind. While the car market has moved toward the middle ground in terms of size and efficiency, pickups have become more polarized. Full-sized trucks have grown in both dimensions and pricing in the past few decades, trending toward luxury and comfort and away from utility. Mid-sized trucks have assumed the same overall dimensions as the full-sized trucks of yesteryear, but sacrifice cargo bed length for additional seating and cab comfort.

As regulations and efficiencies allow manufacturers to continue this shift back toward larger, heavier (and more expensive) vehicles across the board, those drivers left behind will be increasingly reliant on the secondary market for their next vehicle. The aftermarket is already well-suited to the reconditioning, upkeep and service of these vehicles, so no matter how big (or small) our customers’ preferences, we’re ready to help!

The post

link hidden, please login to view
appeared first on
link hidden, please login to view
.

link hidden, please login to view

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By GreenGears Auto Limited
      Published by GreenGears Auto  |  8 min read  |  Subframe Buying Guide
      When a subframe or crossmember fails, the temptation is to save money with an aftermarket replacement. The price difference looks compelling — an aftermarket subframe for a Honda Accord might cost $120 vs. $280 for a used OEM unit. But for structural chassis components, that price difference carries consequences that don't show up until 6,000 miles later. This guide explains exactly what those consequences are, and why used OEM is almost always the right call for subframes and engine cradles. What Is a Subframe and Why Does It Matter So Much?
      The subframe — also called an engine cradle, K-frame, or suspension crossmember — is the structural foundation of your vehicle's front or rear suspension. Every suspension mounting point, steering rack, and engine/transmission mount connects to it. When you steer, brake, or accelerate, the forces travel through the tyres and wheels into the suspension and into the subframe. It is not a peripheral component — it is load-bearing structure.
      This matters because subframe quality directly affects three things most drivers care deeply about: alignment stability, handling feel, and long-term reliability. A subframe that doesn't hold its geometry under load — or that holds it differently from the OEM unit — produces alignment drift, steering wander, and tyre wear that no alignment shop can permanently correct, because the underlying structure is wrong.
      The Aftermarket Subframe Problem
      Aftermarket subframes exist primarily for the collision repair market, where insurance companies pressure shops to use lower-cost alternatives to OEM. They are manufactured to be "close enough" — the mounting points are approximately in the right locations, the bolt patterns are approximately correct, and the overall shape is approximately right. In practice, this creates several specific problems.
      1. Dimensional Tolerance Differences
      OEM subframes are manufactured to tolerances measured in tenths of a millimetre. Suspension geometry — caster, camber, and toe — depends on mounting point locations being accurate to within fractions of a degree. Aftermarket subframes are typically manufactured to tolerances of 1–3mm, which sounds small but translates to measurable geometry deviation at the wheel. The result is a vehicle that drifts, wears tyres unevenly, and requires constant alignment correction.
      2. Steel Grade and Wall Thickness
      OEM subframes use high-strength steel alloys — often dual-phase or TRIP steels — with precisely engineered wall thicknesses optimised for both strength and weight. Aftermarket subframes typically use lower-grade mild steel at higher wall thickness to compensate, resulting in a heavier unit that doesn't deform in the same way during a collision. In modern vehicles designed with specific crumple zones and energy absorption paths, this matters for safety.
      3. Corrosion Protection
      Toyota applies its electrodeposition coating to subframes before assembly — the same coating used on the body. Honda uses a similar process. These factory corrosion protections are difficult or impossible to replicate in aftermarket manufacturing. The result is that aftermarket subframes frequently begin surface corrosion within 2–3 years in northern climates, while OEM units from comparable donor vehicles may show minimal surface oxidation after 10+ years.
      4. Mounting Bracket and Weld Quality
      Every bracket on an OEM subframe — engine mount brackets, steering rack mounts, sway bar tabs — is welded under controlled factory conditions with consistent penetration and quality verification. Aftermarket subframe brackets are frequently thinner, attached with fewer welds, and at slightly different positions, causing looseness, vibration, and eventual cracking at the weld points under road loads.
      OEM vs. Aftermarket vs. Used OEM — The Real Comparison
      Factor New OEM Aftermarket Used OEM (GreenGears) Dimensional accuracy ✅ Factory spec ⚠️ Approximate ✅ Factory spec Steel grade ✅ OEM alloy ⚠️ Lower grade ✅ OEM alloy Corrosion protection ✅ Factory coating ❌ Basic primer ✅ Original coating Weld quality ✅ Factory certified ⚠️ Variable ✅ Original factory welds Alignment result ✅ Holds spec ⚠️ Often drifts ✅ Holds spec Typical cost $700–$2,400+ $80–$280 $160–$680 Warranty (GreenGears) Dealer warranty Variable/limited 90 Days The cost gap between aftermarket and used OEM is real — but it's narrower than it appears once you factor in alignment costs ($80–$150 every time the aftermarket unit shifts), repeat repairs when the bracket welds crack, and the labour cost of doing the job twice.
      Real-World Consequences of Aftermarket Subframes
      "My alignment keeps going out"
      This is the most common complaint after an aftermarket subframe installation. The owner gets an alignment after the repair, drives for 3,000 miles, and the steering starts pulling again. They go back for another alignment — same result. The problem isn't the alignment; it's that the aftermarket subframe's mounting point tolerances allow the suspension geometry to shift under load in ways that an OEM unit doesn't. The only fix is replacing the aftermarket subframe with an OEM unit.
      Vibration through the steering wheel
      Aftermarket subframe mounting bushings are frequently a different durometer (hardness) than OEM, and bracket attachment points that are 1–2mm off cause the steering rack to transmit road vibration differently. The result is a steering feel that's subtly but noticeably different from stock — often described as "rough" or "numb" where the original was precise.
      Premature tyre wear
      Toe deviation of even 0.2 degrees — well within the tolerance range of a typical aftermarket subframe — causes measurable inner or outer tyre wear within 15,000 miles. On a vehicle where the alignment appears correct but the subframe geometry is slightly off, the tyres wear in a pattern that no amount of adjustment can prevent because the root cause isn't the alignment — it's the structure the alignment is measured against.
      When Aftermarket Is Acceptable — and When It Isn't
      To be fair: not all aftermarket subframes are equally poor, and not all applications carry equal risk.
      Lower risk: older vehicles, off-road applications, track builds
      For a vehicle being rebuilt for off-road use, a track car that will run non-OEM alignment settings anyway, or an older vehicle where OEM subframes are genuinely unavailable, aftermarket can be a practical choice. The geometry standards that matter for a daily-driven Accord matter less for a Jeep with a lift kit and custom suspension.
      Higher risk: daily drivers, vehicles with ADAS, AWD platforms
      For a daily-driven vehicle — particularly one with lane-keeping assist, automatic emergency braking, or other ADAS systems that depend on precise suspension geometry — aftermarket subframes introduce meaningful risk. ADAS calibration assumes OEM geometry. An aftermarket subframe that's 1.5mm off in a suspension mounting point can cause persistent ADAS warnings that can't be resolved through calibration alone. AWD vehicles are even more sensitive — subframe geometry affects driveshaft angle and AWD balance on platforms like the Honda CR-V and Toyota RAV4.
      ⚠️ Aftermarket Subframes and Insurance Repairs If your vehicle is repaired after a collision through insurance and an aftermarket subframe is used without your explicit consent, you may have grounds to request OEM replacement. Many states have laws requiring insurers to disclose when non-OEM parts are used. A used OEM subframe costs only moderately more than a typical aftermarket unit — it's worth requesting it specifically. Why Used OEM Works for Subframes Specifically
      Subframes are an ideal used OEM purchase for a specific reason: they are among the most durable components on any vehicle. A subframe from a 55,000-mile accident-damaged Toyota Camry has experienced exactly 55,000 miles of normal road load — the same load it was designed to handle for 150,000+ miles. There is no internal wear, no fluid degradation, no moving parts. It is a piece of formed and welded steel that is either dimensionally intact or it isn't.
      At GreenGears Auto, every subframe is inspected for:
      Bending or twisting from impact — a bent subframe from collision damage is rejected regardless of mileage Crack propagation at weld points — stress cracks near mounting brackets disqualify a unit Mounting point thread integrity — stripped or cross-threaded bolt holes are a disqualifier Corrosion depth — surface oxidation is noted; through-rust is a disqualifier Bracket completeness — missing or damaged auxiliary brackets are documented before listing ✅ The Used OEM Subframe Advantage in Practice A used OEM Honda Accord front subframe from GreenGears Auto costs $180–$360. A new OEM dealer unit costs $700–$1,400. An aftermarket unit costs $80–$160. The used OEM unit is the factory unit — same steel, same welds, same geometry — at the same price point as a quality aftermarket alternative. The choice becomes straightforward. Most Popular Used OEM Subframes in Our Inventory
      Our
      link hidden, please login to view covers front and rear subframes and engine cradles for domestic and import vehicles. Top platforms include Honda Accord and CR-V, Toyota Camry and RAV4, Nissan Armada, Ford Fusion and Escape, Chevrolet Equinox, and VW MQB platform vehicles. All carry a 90-day warranty from confirmed delivery. If your specific vehicle isn't listed,
      link hidden, please login to view — we can search our salvage yard network for your application and confirm availability before anything ships. Shop Used OEM Subframes — Factory Fit, 90-Day Warranty
      Free US shipping on every order. VIN fitment confirmed before dispatch.
      Use code below for an extra 10% off:
      GGA10 📧 [email protected]  |  📞 +1 (315) 305-4300
      GreenGears Auto — Drive Green. Drive Smart.
      🛡️ 90-Day Warranty  ·  🚚 Free US Shipping  ·  ↩️ 15-Day Returns

      link hidden, please login to view
    • By Counterman
      It’s a common comeback: a failed starter covered in oil. Let’s break down why replacing it alone won’t fix the issue and how to prevent it.
      The starter converts electrical energy into mechanical rotation to crank the engine. It relies on clean, dry internal components for proper operation. Engine seals, like valve covers, cam seals, rear main seals and oil pans, are designed to keep oil contained. When these seals fail, oil can leak externally and contaminate components mounted below, including the starter.
      In some vehicle layouts, a rear main seal leak can travel along the bellhousing and reach the starter, though that depends on how the engine and transmission are positioned.
      An oil-soaked starter can suffer internal damage to brushes and electrical contacts, leading to slow crank, intermittent operation, or no crank at all. Oil also attracts dirt, accelerating wear.
      Heat plays a role as well. On vehicles where the starter is located near the exhaust, oil contamination can bake onto the housing and internal components, forming a varnish or sludge. That buildup can increase electrical resistance and further degrade starter performance.
      In real world situations, a technician may replace the starter, only to see the new one fail prematurely. That often results in warranty returns, but the real issue is the unresolved oil leak continuing to contaminate the replacement unit.
      Verify the starter concern, then inspect for oil contamination. Check above the starter for leaks from valve covers, cam seals, or rear main seals. ASE diagnostic logic emphasizes fixing the root cause before replacing components. The correct repair may involve replacing the failed gasket or seal. If immediate repair isn’t practical,
      link hidden, please login to view can be used to help restore seal condition and reduce leakage. To apply, add it to the engine oil, do not overfill, run the engine to circulate, then drive normally. Most leaks stop within a few days of operation. If the starter is oil-soaked, the leak is the problem. Fix it, or the failure will come back.
      This video is sponsored by link hidden, please login to view.
      The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view
    • By liangyanyang
      When maintaining heavy-duty trucks and diesel engines, choosing the right filter is crucial for engine performance and operating costs. Many fleet owners and dealers typically compare original equipment manufacturer (OEM) truck filters with aftermarket truck filters before making a purchase.
      So, what's the difference between original equipment manufacturer (OEM) filters and aftermarket filters?
      What is an original equipment truck filter?
      Original equipment (OEM) filters are manufactured to the specifications of the original vehicle or engine manufacturer. These filters are designed to meet the requirements of the original equipment system in terms of filtration efficiency, airflow, and durability.
      Original equipment manufacturer (OEM) filters are typically used for:
      Heavy trucks Commercial vehicles construction machinery diesel engine The advantages of original equipment manufacturer (OEM) filters include:
      Stable quality Reliable compatibility Stable performance Longer engine protection time What are aftermarket truck filters?
      Aftermarket filters are replacement products manufactured by independent filter manufacturers. High-quality aftermarket truck filters offer similar performance to original equipment manufacturer (OEM) products at a more competitive price.
      Professional aftermarket filter manufacturers typically offer:
      Original replacement filter Custom Brands Provide bulk supply to distributors Flexible production solutions Original equipment manufacturer (OEM) filters vs. aftermarket filters: key differences
      feature Original filter Aftermarket Filters compatibility Fully compliant with original factory standards Depends on the manufacturer price higher More cost-effective Brand promotion Original brand Custom/OEM branding services are available. Supply flexibility Limited Flexible Bulk Production custom made low High How to choose a suitable truck filter supplier
      Whether choosing original equipment manufacturer (OEM) filters or aftermarket filters, the quality of the supplier is the most important factor.
      A reliable truck filter manufacturer should provide:
      Stable filtration performance High-quality materials OEM Replacement Support Strict quality control Rapid delivery capability Why do many dealers choose aftermarket filters?
      Today, many global dealers prefer aftermarket truck filters because they offer the following advantages:
      Higher profit margins Original factory quality and performance Flexible Packaging Solutions Reduce procurement costs High-quality aftermarket filters can effectively protect diesel engines while reducing maintenance costs.
      in conclusion
      Original equipment (OEM) and aftermarket truck filters each have their advantages. The key is to choose a trustworthy filter manufacturer that ensures reliable quality and long-term supply support.
      If you are looking for OEM replacement filters, custom filter solutions, or bulk truck filter supplies, partnering with an experienced manufacturer can help your business grow faster.
      website:www.ixinfilter.com
    • By John Lewis
      I have a 2013 mazda 3i sport. I unfortunately scratched off its under cover engine splash shield guard and would like to replace it with a new one. However, the pics shown with online listing look so different from what I have kept, can anybody help me understand why is the case? Can I purchase the online parts to fit my car?

       
    • Government UFO Files
    • By Advance Auto Parts
      Enhanced rewards tiers modernize program and make it easier for millions of DIY loyalty members to earn and redeem rewards.
      RALEIGH, N.C.--(BUSINESS WIRE)-- Advance Auto Parts (NYSE: AAP), a leading automotive aftermarket parts provider in North America that serves both professional installers and do-it-yourself customers, today launched Advance Rewards – a new, modernized loyalty program designed to deliver greater value and features that matter to its heavy and light DIY customers. The new program replaces the former Speed Perks program and rolls out today at all Advance locations and online.
      Advance Rewards maintains a familiar, tiered structure while introducing meaningful improvements and value that make it easier to earn and redeem rewards and provide customers with more ways to save. The loyalty program’s revised three-tier system – 1st Gear, 2nd Gear, and Top Gear – rewards more frequent shoppers with higher rewards rates and provides greater coupon flexibility, including the ability to combine coupons for up to $100 in savings.
      Advance Rewards maintains a familiar, tiered structure while introducing meaningful improvements and value that make it easier to earn and redeem rewards and provide customers with more ways to save. The loyalty program’s revised three-tier system – 1st Gear, 2nd Gear, and Top Gear – rewards more frequent shoppers with higher rewards rates and provides greater coupon flexibility, including the ability to combine coupons for up to $100 in savings.
      "Advance Rewards delivers the value that our customers are asking for in a loyalty program,” said Bruce Starnes, executive vice president, chief merchant at Advance Auto Parts. "At the same time, it gives us more tools to engage with them, in part through personalized experiences. We put the customer first in everything we do at Advance, which is why we've added exciting new features that recognize customer engagement while maintaining familiarity embedded in the core structure of the program.”
      New Advance Rewards features also include exclusive vendor partnerships that offer members-only deals, bonus points promotions on popular products and sweepstakes opportunities. Members can gain visibility into their rewards and can combine coupons directly in the Advance mobile app and through POS integration in Advance stores.
      Reward tiers include:
      1 st Gear – free to join, earn 5 points per dollar spent, stack up to $100 in coupons 2 nd Gear – spend $500 in a calendar year, earn 8 points per dollar spent, stack up to $100 in coupons Top Gear – spend $1,000 in a calendar year, earn 10 points per dollar spent, stack up to $100 in coupons Loyalty members represent a large portion of Advance Auto Parts' heavy and light DIY business, and by modernizing the program, the company is providing greater value and flexibility to members.
      Customers can join Advance Rewards for free at all Advance Auto Parts locations and online at AdvanceAutoParts.com.
      Visit 
      link hidden, please login to view for more information. About Advance Auto Parts
      Advance Auto Parts, Inc. is a leading automotive aftermarket parts provider that serves both professional installers and do-it-yourself customers. As of October 4, 2025, Advance operated 4,297 stores primarily within the United States, with additional locations in Canada, Puerto Rico and the U.S. Virgin Islands. The Company also served 814 independently owned Carquest branded stores across these locations in addition to Mexico and various Caribbean islands. Additional information about Advance, including employment opportunities, customer services and online shopping for parts, accessories and other offerings can be found at 
      link hidden, please login to view.
      Investor Relations Contact:
      Lavesh Hemnani
      E: [email protected]

      link hidden, please login to view

×
  • Create New...