Jump to content

  • Welcome to Auto Parts Forum

    Whether you are a veteran automotive parts guru or just someone looking for some quick auto parts advice, register today and start a new topic in our forum. Registration is free and you can even sign up with social network platforms such as Facebook, X, and LinkedIn. 

     

Recommended Posts

Posted

Is your car not shifting gears like it used to? An automatic transmission makes driving much less complicated than the manual gear (stick shift) alternative. But that convenience comes at the price of complexity. When an automatic transmission equipped car won’t shift gears, there could be several potential issues. These issues can range from a simple fix to needing a complete transmission rebuild. Below is technical expertise on “Why is my automatic car not shifting gears?” 

Low Transmission Fluid
link hidden, please login to view

Your automatic transmission relies on hydraulic fluid pressure to operate. The pump pulls

link hidden, please login to view
from the transmission pan reservoir to actuate different components. If the transmission fluid level gets low enough, the pump will be unable to push fluid where it needs to go. Even worse, the pump will pull air into the system, which could lead to a lack of lubrication that damages parts

If you are lucky, your vehicle has a transmission fluid dipstick so you can easily check the fluid level according to the instructions in the owner’s manual. If your vehicle does not have a transmission fluid dipstick but is “

link hidden, please login to view
”, that doesn’t prevent you from checking the fluid level. In most cases, the fluid can be checked via a fill plug, but the transmission has to be at a certain temperature and the vehicle must be level. This isn’t an easy task, so it might be best to have your local
link hidden, please login to view
do it for you.

Faulty Shift Solenoid

We just mentioned how an automatic transmission relies on pressurized fluid to operate, but that fluid also needs to be routed to where it is needed. In a modern, electronically controlled automatic transmission, shift solenoids control the flow of transmission fluid. If the shift solenoid is faulty, then the fluid won’t be routed to the desired shift actuator. In older non-electronically controlled transmissions, shifting was controlled by shift valves, but the idea is the same. Shift solenoids can wear out or get stuck, leading to a no-shift condition. Fixing a faulty shift solenoid usually requires removing the transmission fluid pan to access the transmission valve body.

Low Transmission Fluid Pressure

You should be seeing a pattern of how important hydraulic fluid is to the operation of an automatic transmission. If the transmission fluid level is fine, there may still be a problem with the fluid pressure. Low fluid pressure can be caused by a worn out pump, clogged fluid passages or a clogged transmission fluid filter. A lack of shifting car gears due to low fluid pressure usually means it is time for a

link hidden, please login to view
. If the problem is with the pump itself, then you are probably looking at a transmission rebuild.

Bad Transmission Control Module

Most modern automatic transmissions have an electronic

link hidden, please login to view
(TCM). The control module takes input from various sensors, and decides how the transmission should react. Depending on where the control module is mounted, it can lead a very hard life. Extreme temperatures, vibrations, leaking fluids and sometimes even how the circuit board is built can all lead to failures of microchips and other electronic components. If the check engine light is on while you are having shifting problems, the TCM may be the issue.

Broken Shift Cable

Each time you drive, the shifter is moved at least twice, once for driving and again for park. That movement adds up over the years. While an automatic transmission doesn’t have the complicated shifting mechanism of a manual transmission, there is usually a physical connection between the shifter and the transmission. Modern

link hidden, please login to view
usually have plastic components that can break down over time. There may also be bushings that get worn out. The shift cable itself is usually metal and rarely breaks, but the pieces connecting it to the transmission can possibly fail.

Shift Lock Engaged

If the car is not shifting into gear from park, then the issue might be the gear shift interlock. Most modern vehicles have a lockout on the automatic gear shifter that requires the brake pedal to be pressed first. If the brake pedal isn’t pressed, the shifter won’t move. It is possible that the brake pedal sensor doesn’t read that the pedal is pressed, or a break in the shift interlock circuit interrupts the connection. The shift lock can be

link hidden, please login to view
.

Worn Out Bands

Just like how brake pads can wear out, so can the friction materials inside the transmission like the bands. Transmission bands hold certain components in place, while others are allowed to rotate. When this happens, the transmission won’t go into certain gears. Unfortunately worn out bands usually mean a complete transmission overhaul. Material from the worn out bands can make their way into sensitive fluid passages, clogging them or causing accelerated wear

Failed Throttle Sensor

This one may seem odd, but gauging how much throttle input the driver is giving makes a big difference in how the transmission acts. Whether the input is from a

link hidden, please login to view
or a cable, if the driver pushes down the gas pedal, the transmission needs to change gears. But if that input isn’t received, the transmission has no idea what the driver wants to do. If the transmission doesn’t know the driver is hitting the gas, it might not shift into the next gear. Even worse, on some older transmissions, if the transmission isn’t linked correctly to the throttle input, severe damage can be done.

If your transmission isn’t shifting like it used to, simply head to your local

link hidden, please login to view
center. Our team of ASE-certified technicians have the expertise and training to diagnose your automatic transmission issues. As a bonus, your repair is covered by our free 24-Month/24,000-Mile
link hidden, please login to view
(parts and labor on qualifying repairs and services), which spans across the entire nationwide NAPA Network, including 17,000+ NAPA Auto Care center locations.

Photos courtesy of

link hidden, please login to view
.

The post

link hidden, please login to view
appeared first on
link hidden, please login to view
.

link hidden, please login to view

Sell your car with CarBrain

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Dorman Products
      Why some vehicles have more than one spin-on filter
    • By abenleulmi
      The thermostat is a crucial component in your car's engine system, playing a vital role in regulating the engine temperature. Contrary to common beliefs, removing your car's thermostat can lead to severe consequences, affecting fuel efficiency and engine lifespan. In this article, we will explore the benefits of retaining the thermostat and explain why removing it should be avoided. link hidden, please login to view  
    • By Counterman
      Research by Carfax shows the used car market surging in both value and volume. The automotive aftermarket is positioned to benefit significantly—and among those who understand it best is
      link hidden, please login to view, president of link hidden, please login to view (APA). In an industry where profitability is boosted by the number of repairable vehicles on the road, the recent upswing in used car sales is providing tailwinds that aftermarket businesses are ready to ride.  “An increase in used car sales as well as an increased valuation of those cars both have huge benefits for our business,” Tucker explains. “With more vehicles on the road in that sweet spot of being 4-12 years old, our opportunity for selling parts increases exponentially.” 
      That “sweet spot” Tucker refers to is the prime range for aftermarket demand. These vehicles are typically out of warranty, increasingly in need of maintenance and repair, and owned by drivers more likely to invest in keeping them roadworthy—especially when used car values are holding strong. It’s a powerful combination that leads to increased part sales, especially in high-failure-rate categories. 
      Data is the Differentiator 
      According to Tucker, the key to capitalizing on this growing opportunity lies in one word: data. 
      “Keeping track of what we need to have on the shelf to service this aging car parc is the number one driver in capitalizing on servicing these vehicles,” he says. “Also understanding how the types of repairs change as the vehicle ages is important. Here again, data is the driver to success.” 
      From stocking the right parts for the right model years to understanding when customers shift from premium to value-tier products, every decision aftermarket businesses make should be rooted in understanding vehicle age trends and consumer vehicle repair behavior. “Understanding the brands and price points that change as the vehicle ages also must be top of mind,” he adds. 
      Growth For Established Players 
      With used car sales rising sharply, some might foresee a flood of new players entering the aftermarket to capitalize on that replacement parts demand. But Tucker doesn’t see it playing out that way. 
      “Having an aging car parc also means expanding your inventory in order to cover those additional model years adequately,” he says. “Having inventory dollars invested in the right places is not something that happens overnight, and so new entrants into this space are few and far between.” 
      Instead, he anticipates new investments going into existing aftermarket businesses. The industry’s resilience—especially during economic uncertainty—continues to attract capital. “I won’t ever say we are recession-proof as an industry, but we are recession-resistant,” Tucker notes. “Our space has proven to be an attractive one for investors and I don’t see that changing.” 
      Vehicle Categories for Strong Sales  
      While aging vehicles generally mean more part sales overall, Tucker is quick to point out that those sales fluctuate based on a variety of factors: vehicle miles driven, car parc composition and failure rates. 
      “When you take all of those into account, we see categories such as brakes, ride control and chassis all having exponential growth,” he says. “Anything the vehicle must have to start, run and stop effectively are all areas of strong growth.” 
      And as used car values rise, owners are more inclined to authorize discretionary repairs, reversing a trend often seen in older vehicles. “We will also see more of those discretionary repairs come into play on older vehicles as their value holds strong and steady,” Tucker adds. 

      The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view
    • By APF
      When selecting parts for a car repair, it pays to know the differences between original and aftermarket parts. Whenever possible, get estimates for both.

      Choosing between original and aftermarket car parts — and even used parts of either type — is all about squaring your priorities with your budget.
      You’ll have different options depending on the part and the shop. And the best choice will depend on whether you’re trying to keep repairs cheap, restore your car’s appearance after a wreck or soup up your ride.
      » SIGN UP:  link hidden, please login to view
      Before we get into that, here are the key differences:
      Original equipment manufacturer (OEM) parts match those that came with your car, and are of the same quality as its original parts. They’re also the most expensive. Aftermarket parts are cheaper, and made by other manufacturers — often several, giving you more options. Used parts may have a bit of wear and tear, but should be inspected or rebuilt to ensure they’ll work. These are the cheapest option. Choosing between aftermarket and OEM parts
      Your decision will depend on the type of repair and the quality and price of the parts. Always look for parts that come with a warranty, even if they’re OEM, so you’ll be protected in case they fail.
      Auto body repairs
      Some aftermarket parts may be OK for 
      link hidden, please login to view, but others won’t be as good, says Michael Calkins, manager of technical services at AAA. “There’s a lot of variation in quality.” For example, he says, aftermarket parts often don’t have the same level of rustproofing as original parts, fit and finish don’t match, or panels don’t align properly. If OEM parts are used in auto body repair, the car should look and work exactly as it did before the damage, because everything will match up. OEM parts are also crash-tested, unlike many aftermarket parts.
      Aftermarket parts come at varying price points and levels of quality, but because they are cheaper, insurance companies often prefer them. If you want OEM parts but are dealing with an insurer that wants the shop to use aftermarket parts, ask to pay the difference.
      “There’s also the option of used parts, depending on the age of the vehicle,” Calkins says. “It may be cheaper than an aftermarket part but still have all of the original quality.”
      Mechanical repairs
      A used part, whether it’s OEM or aftermarket, can really save money on repairs under the hood, so long as it’s inspected first and warrantied. And some aftermarket companies reverse-engineer their products to be even better than OEM versions.
      For example, many car buffs will tell you that you can get heavy-duty shocks and struts or brake pads that are made of stronger materials. Scan some reviews online, or talk with your mechanic if you’re not sure whether an aftermarket part could be an upgrade.
      Adding some extras
      If you’d like to modify your ride by adding something like a backup camera or back-seat TV screen, you’ll probably be looking for aftermarket parts. Certain aftermarket upgrades could increase 
      link hidden, please login to view. This is especially true for improvements like a better sound system or alloy wheels, rather than mechanical repairs. Who provides OEM or aftermarket parts?
      The options you’ll have for parts depends on the nature of the repairs and what type of shop you take your car to:
      Dealership repair shops will offer only OEM parts — they have no reason to offer a cheaper product from a competitor link hidden, please login to view may be able to offer you a choice between OEM and aftermarket parts Independent garages that specialize in your type of vehicle will likely have both, but with quicker access to OEM parts, including used OEM parts, which can really save you Auto body shops can offer both, but if your collision repair is part of an insurance claim, the insurer will likely prefer aftermarket parts to save money Depending on the job, the cost of OEM versus aftermarket parts varies. Whenever you’re given the choice, ask to see estimates for both so you can weigh your options.
      Source: 
      link hidden, please login to view
    • By Exhaust Auto
      Hey everyone, I’ve been researching car resonators for a custom exhaust build and wanted to ask for some advice. How do resonators help refine the exhaust sound and reduce unwanted noise frequencies? I’ve heard they can improve the overall exhaust note and performance, but I'm curious if they really make that much of a difference for performance tuning.
      Any suggestions or experiences would be awesome, especially if you've worked with resonators for tuning your vehicle. Thanks!
      If Someone check this product detail visit this :  link hidden, please login to view
      car-Resonator-Muffler.avif

×
  • Create New...