-
Welcome to Auto Parts Forum
Whether you are a veteran automotive parts guru or just someone looking for some quick auto parts advice, register today and start a new topic in our forum. Registration is free and you can even sign up with social network platforms such as Facebook, X, and LinkedIn.
Continental Adds Electronic Parking Brake Calipers
-
Similar Topics
-
By Mia
When it’s time to replace your vehicle’s brake pads, you often face the question: should I opt for OEM brake pads or aftermarket ones? Consulting repair shops or friends typically results in recommendations for OEM brake pads. However, for us, changing brake pads isn’t daunting; what’s crucial is understanding the differences between these two types. This understanding allows us to make an informed decision about which type is suitable for our needs.
What Is OEM Brake Pads
OEM stands for Original Equipment Manufacturer. OEM brake pads are manufactured by the same company that produced the original brake pads installed in your vehicle when it was first built.
These brake pads are designed to meet the specifications and standards set by the vehicle manufacturer. They are often sold through authorized dealerships or parts suppliers affiliated with the vehicle brand. OEM brake pads are known for their exact fitment, consistent performance, and compatibility with your vehicle. They typically come with a warranty and are considered to offer a high level of quality and reliability.
And they have stringent requirements. From the production process to the shipment of brake pads, everything is manufactured and inspected according to standards. In practice, the brake pads installed in vehicles are all qualified and trustworthy products.
What Is Aftermarket Brake Pads
Aftermarket brake pads are brake pads manufactured by third-party companies not affiliated with the original vehicle manufacturer. These companies produce brake pads that are compatible with a wide range of vehicle makes and models. Aftermarket brake pads are often designed to meet or exceed the performance and quality standards set by OEM brake pads.
They are available in various materials, including semi-metallic, ceramic, and organic compounds, offering a range of performance characteristics and price points. While aftermarket brake pads may offer cost savings and a wider selection compared to OEM options, the quality and consistency of aftermarket products can vary depending on the manufacturer.
It’s important to research and select reputable aftermarket brands to ensure compatibility and performance.
AFTERMARKET VS. OEM BRAKE PADS: PROS & CONS
Aftermarket brake pads:
Pros:
Cost: Aftermarket brake pads typically come at a lower price point compared to OEM brake pads, making them a favorable choice for customers with budget constraints Variety: Aftermarket brake pads come in a wide range of options, including different materials and performance characteristics, allowing consumers to choose pads that best suit their driving needs. Availability: Aftermarket brake pads are widely available from various retailers and suppliers, making them convenient to purchase. Potential Performance Enhancements: Aftermarket brake pads manufacturers also improve braking performance, such as reduced noise, better heat dissipation, or enhanced stopping power. Cons
Quality Variability: Many aftermarket brake pad manufacturers prioritize low prices, which can result in inconsistent quality. This often leads to issues such as excessive noise, inadequate friction coefficient, and increased wear on brake discs, which are highly unfavorable circumstances. Compatibility Issues: While aftermarket brake pads are designed to be compatible with a variety of vehicles, issues can arise with the dimensions of the brake pads. This can lead to mismatched installations or excessive gaps, resulting in noise and impacting brake performance. Warranty Concerns: While aftermarket brake pad manufacturers often provide warranty periods, many times, these warranties do not accurately reflect the actual lifespan of the brake pads. In other words, the lifespan of the brake pads is significantly reduced, leading to more frequent replacements compared to OEM brake pads, thereby increasing the overall budget for maintenance. OEM brake pads
Pros:
Exact Fitment: OEM brake pads are designed to precisely fit the specifications of your vehicle, ensuring optimal performance and safety. Quality Assurance: OEM brake pads are manufactured by the same company that produced the original parts for your vehicle, guaranteeing consistent quality and reliability. Warranty Coverage: OEM brake pads typically come with a warranty from the vehicle manufacturer, providing peace of mind and protection against defects or failures. Manufacturer Support: Purchasing OEM brake pads from authorized dealerships or parts suppliers often comes with access to manufacturer support and assistance. How Should We Choose
Actually, for us ordinary consumers, when choosing brake pads, we often compare based on quality and price. But for some brake pad manufacturers, isn’t there one that produces aftermarket brake pads with quality comparable to OEM brake pads?
The answer is yes, and KETULLA is one such factory. Established in 2000, we’ve been in the business for 24 years, continuously researching, developing, and optimizing brake pads.
We have obtained authorization from 6 automotive manufacturers to produce brake pads, earning us the title of OEM brake pads manufacturer.
Whether it’s aftermarket or OEM brake pads, we uphold the same standard of quality as OEM brake pads. This is evident in several aspects:
Dimension: We adhere to strict specifications for brake pad dimensions, maintaining a tolerance range of 0.1 to 0.2mm, which fully complies with OEM brake pad standards. Materials Selection: No asbestos(Actually, we stopped using it 10 years ago) We use high-quality materials(ceramic carbon fiber, graphite, metal fiber)in our brake pads, ensuring durability and performance comparable to OEM standards. Copper-free: We strictly adhere to international standards by manufacturing brake pads that are copper-free, thus avoiding environmental pollution Manufacturing Process: Our production process follows strict guidelines and quality control measures to maintain consistency and reliability in every brake pad we produce. Testing and Certification: Each brake pad undergoes rigorous testing to ensure it meets or exceeds industry standards and safety requirements. Quality Guarantee: We stand behind the performance of our brake pads, offering warranties and support to ensure customer satisfaction and safety on the road. link hidden, please login to view low metallic brake pads link hidden, please login to view semi metallic brake pads link hidden, please login to view ceramic brake pads GF truck brake pads
Hope you can get more knowledge about brake pads from this website:
link hidden, please login to view -
By Mia
Changing your brake pads is a manageable task if you have the right tools and follow the steps carefully to help you replace your brake pads: Tips
Always replace brake pads in pairs (both front or both rear) to ensure even braking. Dispose of the old brake pads and any other materials properly, following local regulations. Consult your vehicle’s manual for specific instructions and torque specifications. Welcome to learn more about brake pad types from here：
link hidden, please login to view 1. Tools and Materials Needed
Jack and Jack stands Lug wrench C-clamp or brake caliper tool Wrench or ratchet and socket set Brake pads Brake fluid Bungee cord or string Gloves and safety glasses Wheel chocks 2. Prepare the Vehicle
Park your vehicle on a flat surface and engage the parking brake. Place wheel chocks behind the rear wheels to prevent the car from rolling. 3. Raise the Vehicle
Use a jack to lift the car off the ground, and then place it securely on jack stands. 4. Remove the Wheel
Finish removing the lug nuts and take the wheel off to expose the brake assembly. 5. Remove the Brake Caliper
Locate the bolts on the back of the brake caliper and remove them using a wrench or ratchet. Carefully lift the caliper off the brake rotor. Use a bungee cord or string to hang the caliper from the suspension to avoid putting stress on the brake hose. 6. Remove the Old Brake Pads
Slide the old brake pads out of the caliper bracket. Take note of how they are positioned for proper installation of the new pads. 7. Inspect the Brake Rotor
Check the brake rotor for any signs of damage or excessive wear. If the rotor is in poor condition, it may need to be replaced or resurfaced. 8. Compress the Brake Caliper Piston
Use a C-clamp or brake caliper tool to slowly compress the caliper piston back into the caliper. This will make room for the new brake pads. Open the brake fluid reservoir cap to make this process easier. 9. Install the New Brake Pads
Place the new brake pads into the caliper bracket in the same position as the old ones. 10 Reattach the Brake Caliper
Carefully position the brake caliper over the new brake pads and rotor. Reinsert and tighten the caliper bolts securely. 11. Reinstall the Wheel
Put the wheel back on the hub and hand-tighten the lug nuts. 12. Lower the Vehicle
Carefully remove the jack stands and lower the vehicle back to the ground using the jack. 13. Tighten the Lug Nuts
Use the lug wrench to fully tighten the lug nuts in a star pattern to ensure even pressure. 14. Check the Brake Fluid
Check the brake fluid level in the reservoir and add fluid if necessary. Replace the reservoir cap. 15. Test the Brakes
Before driving, pump the brake pedal a few times to ensure the brakes are properly engaged and check for any leaks or issues. -
By carbdoc
I can't find a rebuilt brake booster for my 1978 Dodge D-150 truck anywhere; I have been hunting for months. The Chrysler number is 4094149. The A-1 Cardone number is 54-73716. I would settle for a rebuildable core at this point; my old booster is rusted-out on the back side so it is no good as a core.
-
By Mia
To extend the lifespan of your brake pads, you can adopt several practices and maintenance habits. Here are some tips to help make your brake pads a longer
Drive Smoothly
Avoid Hard Braking: Try to brake gently and gradually instead of slamming on the brakes Coast to Stop: whenever possible, let your vehicle coast to a stop rather than braking abruptly.
Maintain A Safe Following Distance
Reduce Frequent Braking: Keeping a safe distance from the car in front of you allows more time to brake gently.
Anticipate Stops
Pay attention to traffic flow and road conditions ahead to anticipate stops. Gradually slowing down instead of slamming on the brakes can significantly extend the life of your brake pads.
Avoid Overloading
Excessive weight puts additional strain on your vehicle's braking system. Try to avoid overloading your vehicle beyond its recommended capacity.
Coast When Possible
When approaching a stop sign or red light, coasting instead of maintaining speed can reduce the need for heavy braking.
Brake Gently When Towing
If you're towing a trailer or carrying heavy loads, be extra cautious with braking. Allow more distance to stop and brake gently to reduce strain on the brake pads.
Regular Maintenance
Follow the manufacturer's recommended maintenance schedule for your vehicle, including brake inspections. Promptly replace worn brake pads before they cause damage to other brake components.
Use Engine Braking
When driving downhill, downshift (if you have a manual transmission) or use the engine to slow down the vehicle instead of relying solely on the brakes.
Avoid Riding The Brakes
Constantly keeping your foot on the brake pedal, especially when not actively braking, can lead to premature wear of the brake pads. Practice keeping your foot off the brake pedal when not needed
Quality Brake Pads
Invest in high-quality brake pads that are suited for your vehicle. While they may cost more upfront, they can last longer and provide better performance.
Avoid Harsh Weather Conditions
If possible, avoid driving in harsh weather conditions like heavy rain or snow, as these can accelerate brake pad wear.
Check Brake Fluid
Ensure your brake fluid is at the proper level
If you want to know more basic information about brake pads, you can refer to this website：
link hidden, please login to view -
By Mia
Truck Brake Pads Thickness
The recommended thickness of truck brake pads may vary depending on the specific brand and model of the truck, as well as the type of braking system installed.
However, regardless, our principle is to replace them when the thickness is less than 3 to 4mm, which plays a protective role in our safety. The new thickness of truck brake pads is typically 30 millimeters. As the brake pads wear from use, their thickness gradually decreases. Once the brake pads reach the recommended minimum thickness, they should be replaced to ensure optimal braking performance and safety.
We suggest you check our
link hidden, please login to view for more details on this issue Truck Brake Pads Features
Made 100% in Ketulla Brakes manufacturer , China pad factory Stainless steel backing plates (reduced heat conduction, power powder paint) 30000~50000km pad lifespan ECR 90 Certificated quality with test report Wooden packed box while shipping Premium stainless-steel hardware kits included for installation Best Type Of Brake Pads For Trucks
We all know that the basic formulas for brake pads nowadays are ceramic, low metallic, and semi-metallic brake pads. However, for truck brake pads, we strongly recommend using the semi-metallic formula. The reason is that semi-metallic brake pads have a much higher wear resistance compared to low metallic and ceramic formulas, even though ceramic formulas are more friendly to the brake rotor.
what is the difference between ceramic, low metallic, and semi-metallic brake pads, check our link hidden, please login to view,
The Commercial Heavy Duty Brake Pads Applications
Best Pickup Truck Brake Pads
KETULLA’s Pickup Truck Brake Pads are expertly crafted for durability and performance. Engineered to handle diverse driving conditions, they provide reliable stopping power, essential for heavy-duty tasks or daily commuting. With
link hidden, please login to view advanced friction materials, Ketulla ensures a smooth and quiet braking experience while minimizing brake dust. Ketulla Brake Pads offer consistent performance and safety, elevating driving confidence in every road condition.
Best Brake Pads For Lifted Trucks
Ketulla Brake Pads for lifted trucks are specially engineered to meet the unique demands of modified suspension systems and larger tires. Designed by Ketulla with precision and expertise, these brake pads offer exceptional performance and safety for lifted truck owners. Constructed with high-quality materials, Ketulla Brake Pads provide reliable stopping power under heavy loads and off-road conditions. Engineered to minimize noise and brake dust, they enhance the driving experience for lifted truck enthusiasts. confidence in every journey. Trust Ketulla to provide the durability and reliability required to complement your lifted truck’s capabilities.
link hidden, please login to view Best Brake Pads For Towing Or Trailers
Brake pads for towing and trailers serve a similar function to those used in regular vehicles but are often designed to handle heavier loads and more intense braking conditions. When towing a trailer or hauling heavy loads, the braking system needs to exert more force to slow down or stop the vehicle safely.
Material Composition Heat Dissipation Friction Coefficient Wear Resistance Compatibilit
Bus Brake Pads
Bus brake pads are a critical component of the braking system in buses. These pads are designed to create friction against the brake rotors when the brake pedal is depressed, thereby slowing down or stopping the vehicle. The friction generated between the brake pads and the rotors or drums converts the kinetic energy of the moving bus into heat energy, dissipating it into the surrounding air.
Bus brake pads are typically made from materials KETULLA’s semi-metallic A-grade ceramic materials which we recommended with low dust and low noise.
High performance Is key important for ensuring the safety of passengers and others on the road.
If you want to learn more more pads for your car, click belows to explore more pads brake models.
link hidden, please login to view
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.