-
Welcome to Auto Parts Forum
Whether you are a veteran automotive parts guru or just someone looking for some quick auto parts advice, register today and start a new topic in our forum. Registration is free and you can even sign up with social network platforms such as Facebook, Twitter, Google, and LinkedIn.
Alignment Tip - When to Recalibrate Steering Angle Sensor
-
Similar Topics
-
By Counterman
Bartec TPMS announced the release of its next-generation Rite-Sensor, the RS-2000.
“First and foremost, to ensure a smooth transition for our customers, the second-generation Rite-Sensor was designed to be completely backward-compatible with the first-generation version,” Bartec TPMS Product Manager Matthew Hitchcock said. “The second generation will allow us to continue our progress towards 100% vehicle coverage.”
“The RS-2000 was designed to work on vehicles with high-line TPMS – that is vehicles with wheel-arch initiators,” Bartec CEO Scot Holloway said. “This new design also means improved sensor performance, and future diagnostics, all aimed at making our customers more successful servicing TPMS vehicles.”
Launched in September, the new Rite-Sensor is available now through authorized resellers.
To activate the additional vehicle coverage, users of the following Bartec TPMS Tools – the Tech600pro, Tech550Pro, Tech450 Pro or TechRITEPro – need to download and install update 6.0. Users of the Tech500Pro, Tech400Pro and Tech300Pro need to get update 66.0.
As always, all tool updates are available (with a current account) at
link hidden, please login to view, or by using the TPMS Desktop. To learn more about the new Rite-Sensor and other Bartec technology, visit the Bartec booth (41057) at this year’s SEMA Show.
The post
link hidden, please login to view appeared first on link hidden, please login to view.
link hidden, please login to view -
By Counterman
Rack-and-pinion steering is the predominant type of steering system on vehicles today.
Simplicity is one of the reasons for their popularity. On these systems, an inner and outer tie-rod end on each side connects the steering rack to the steering knuckle. The inner tie-rod ends tend to last longer than the outers because they have a smaller range of motion, and they simply don’t get the same abuse as the outers on these systems.
Throughout the life of a vehicle with rack-and-pinion steering, it’s not uncommon to replace outer tie-rod ends multiple times, and rarely or never replace the inners – as long as the boot (also known as bellows) that protects them from dirt and moisture isn’t damaged.
Before rack-and-pinion steering became popular, a parallelogram steering linkage was the predominant setup on most cars and trucks, consisting of a pitman arm, idler arm, center link and inner and outer tie-rod ends on each side. The tie rods are connected by a tie-rod sleeve. Even after rack-and-pinion systems became popular and virtually standard on all cars, parallelogram steering remained in use on trucks, vans and heavy-duty vehicles for many years, but today rack-and-pinion is becoming more common on them too.
There’s another type of steering system you may run across, also common on some trucks and heavy-duty vehicles, and it consists of a drag link and tie rods. The difference is there’s no idler arm. A drag link goes from the pitman arm to a tie rod that connects to the steering knuckle, and second tie rod runs from the first to the other steering knuckle.
Terminology can vary, but don’t let that throw you. In this illustration, No. 4 is the drag link, No. 2 and No. 1 are tie rods. Some people may refer to the drag link as an inner and outer tie rod. Also note No. 6, a steering damper, is a common feature on heavy-duty vehicles.
When selling steering components, it can be useful to look at a diagram, in case your customer is unsure of the name of the component they need. You also can use it as an aid in pointing out additional items they may need.
The Quality Question
It’s not uncommon to be asked about quality, especially with the different lines and varying cost of the steering components you sell. The “economy” or “value” line is designed to make it affordable to repair a vehicle. There’s nothing wrong with these components. I’ve used them many times, and they’re as safe as any other. Will they last as long? Most likely not, but many people choose to go this way because it’s simply all they can afford, and we all can respect that.
On heavy-duty or vehicles that the owner plans to keep long-term, it’s best to recommend a higher-end line of components. They’ll last longer, and you also can remind your customer that every time you replace a steering component, an alignment must be performed. That’s an additional cost, and worn components also will cause abnormal tire wear. A less expensive component that doesn’t last as long actually might cost more in the long run.
Where’s the Grease Fitting?
Fewer steering components come with grease fittings than in the past. Many people perceive this as a sign of “cheap” or low quality. This is far from the case. Many high-quality steering components today are constructed with better materials and higher-quality lubricants. Lack of a grease fitting doesn’t mean low quality. But it does mean there’s no way a poor-quality lubricant can be added to the joint, it can’t be over-greased, and there’s no way for moisture or contaminants to find their way in either.
Here’s the kicker: Is your customer going to personally grease the fittings themselves? As a professional technician, if I had a nickel for every greaseable joint I’ve seen that was completely worn out, with not even a remote sign of grease ever having touched the zerk fitting … you know the rest. This is reality. Blame it on whomever. If the greaseable joints aren’t going to be greased, I’d rather have those not designed for it.
Extras
There are a few good suggestions to keep in mind when selling steering components. If it’s a rack-and-pinion vehicle, rack boots are a good suggestion since the outer tie-rod ends must be removed to replace them. On parallelogram steering, when tie rods are replaced, tie-rod adjusting sleeves are a huge benefit. These are almost always rusted in place and difficult to loosen and turn. New sleeves make the installation much quicker, as well as the alignment. If the vehicle has a steering damper, it’s always a great recommendation. These tend to get ignored, but are commonly worn out. And finally, don’t forget grease for the grease gun, and shop rags to clean up the mess.
The post
link hidden, please login to view appeared first on link hidden, please login to view.
link hidden, please login to view -
By Buy Auto Spare Part
Looking for top-quality spare parts at budget-friendly prices? Look no further! We offer a wide selection of well-conditioned spare parts from the best dealers, available for link hidden, please login to view. With our professional service, you can trust that you're getting the best value for your money.
Condition : New
Make: BMW
Compatibility: f31,f32,f3,f20,f36
including airbag
link hidden, please login to view -
By Buy Auto Spare Part
Looking for top-quality spare parts at budget-friendly prices? Look no further! We offer a wide selection of well-conditioned spare parts from the best dealers, available for
link hidden, please login to view. With our professional service, you can trust that you're getting the best value for your money. Toyota Camry Style Customizable Steering Wheel Customize your driving experience which our brand new Carbon Fiber steering wheel for Toyota Camry drivers! View each of the customizable options by scrolling through our photos and choosing your best preference! We will create a high quality, beautiful steering wheel built specifically for you!
For more info
Contact:+1 (405) 283 2648
Email: [email protected]
[email protected]
-
By Counterman
rack: noun
1. The linear component of a rack and pinion gearset.
2. The short name given to a rack and pinion steering assembly for an automobile.
This is one of those times when the same word is used over and over to describe two things that are related but different. When I first learned about rack-and-pinion steering, it was anything but new. Nonetheless, in my world, I was used to traditional. I was among the guilty who shunned things that in no way could ever be better than a carburetor, points, condenser and crank windows.
When it came to steering, if it didn’t have a steering box, pitman arm, idler arm and a center link, it probably wasn’t a real car.
You laugh, but now, so do I. Automotive technology always has changed for the better, and rack-and-pinion steering just made sense. It was simple, less expensive, lighter-weight and simple to maintain. The term “rack and pinion” describes a type of gearset that transfers rotational motion into linear motion. In the case of an automotive application, the rack-and-pinion gearset is housed in a unit that we simply refer to as the steering rack, or rack for short.
So, a steering rack transfers the rotational motion of the steering wheel into the linear motion required to move the tie rods left or right for steering. They initially became commonplace on small economy cars and were additionally well-suited for front-wheel-drive applications due to the limited space they require. Now, almost every new car, SUV and light truck on the market has rack-and-pinion steering.
A simple design and low maintenance are benefits of a steering rack, but that doesn’t mean they haven’t caused a headache or two over the years – and there are many questions you’ll still field about these systems. While they’re too difficult to describe, the service aspect is where you’ll get most of the questions, and this is where your customers will benefit from your knowledge. After all, as a counter professional, you’re in the business of answering questions.
Many early steering racks on small cars were simple manual racks with no hydraulic assist. These were my favorite. They rarely developed any problems and, in many cases, would last the life of the vehicle. Then, cars got heavier, people got softer and hydraulic power steering for the most part became standard. Today, electric power steering is taking over, and in many ways with the lack of a hydraulic pump, hoses, lines and leaks, it has brought back the simplicity of the original manual rack.
Although many aspects are the same regardless of the type of assist, in this article I’m going to focus on hydraulic power-steering racks. They’re still going to be around for some time, and service considerations are where you’ll get most of your questions. Making sure the job is done right is important for not only safety and efficiency, but it also helps prevent unnecessary warranty hassles.
First and foremost is power-steering fluid. It’s commonly overlooked and neglected. The valving and seals inside a hydraulic power-steering rack rely on clean fluid for proper operation, and just like any other fluid service, ignoring this can shorten the life of the steering rack. When replacing a rack, fluid should be drained and flushed as best as possible, and it’s a good idea – as well as a good upsell – to install an inline filter. Most of these types of filters work with a magnetic mesh that’s especially beneficial to trap small metal particles.
One of the most common problems to arise is a torn rack boot. These rubber bellows-style boots expand and collapse every time you turn the wheels, and it’s just unavoidable that they eventually wear out. There are two immediate problems with this. One, the inner tie-rod ends will collect dirt in the grease that lubricates them, and two, dirt and debris will be drawn into the rack seals every time you turn, eventually causing damage and leaks.
link hidden, please login to view Torn boots should be replaced as soon as possible when they’re discovered, and the vast majority of them require the removal of the outer tie-rod end. An alignment is required afterward – no ifs, ands or buts.
Worn inner tie rods are another common problem, and while “technically” not part of the steering rack, service procedures can affect the integrity of the rack. Many new racks come with new inner tie rods and boots pre-installed to prevent damage from incorrect installation, so the boots keep everything sealed up from the start.
Most of the time, replacing the inner tie rods requires a special tool, kind of like a deep socket on steroids – deep enough to reach over the length of the tie rod and access the inner end where it bolts to the rack. On the end of the tool is a half-inch square drive. The factor to be aware of is that by-the-book service procedures call for holding the rack (the actual internal component) in a soft jaw vise when removing or installing the inner tie rod, so you don’t twist it and risk damaging the pinion gear.
The problem is in practice, this is rarely done because there’s no way to do it with the entire assembly installed in the car. There’s simply no access to get any type of holding fixture onto the actual rack. For fun, I looked up the top videos on the internet for installing inner tie-rod ends, and none of them mention holding the rack. Perhaps because they don’t want you to know they didn’t do it, or they don’t know the solution because there really isn’t a good one – at least not one I’ve learned of yet.
You might be able to get locking pliers clamped onto the rack to hold it, but that would gouge the machine-finished surfaces and tear up the rack seal, so that’s out. So, how serious is the problem? Most inner tie rods don’t require very high torque, and many of them use a type of thread locker, a locking nut or a type of retainer to prevent loosening. The bottom line is, if you use hand tools to loosen and tighten the inner tie rod, and slowly torque it to the correct specification during installation, the pressure against the pinion is going to be minimal, and damage is unlikely.
Whatever you do, use hand tools. Do not use an impact wrench on the end of the inner tie-rod tool. This will transfer a series of blows directly into the pinion and the valve assembly inside the unit, and you could be asking for trouble.
As mentioned before, any time the rack or a tie-rod end is replaced, an alignment will need to be performed. But, just as important is any time the rack is being replaced, the steering shaft will be disconnected. Always make sure the steering wheel isn’t allowed to spin free, or the airbag clock spring will be damaged. Also, make sure the rack is in its centered position before initially disconnecting the steering shaft and before reinstalling it.
Quite possibly the most useful tip for new steering-rack installation involves cleaning the splined steering-shaft connection. It’s a precision fit. In other words, both sets of splines need to be perfectly clean. If they are, they’ll slide right together. If not, you’ll fight it forever. Many new (or remanufactured) racks are painted, and it’s not uncommon for overspray to get on the splines. This may seem inconsequential, but the thickness of the paint is enough to cause a nightmare.
There are many opportunities for upsells with steering racks and related services. Outer tie-rod ends are often replaced one at a time and, in many cases, this is all that’s needed. Still, it’s a good reminder to check the rack boots and other ends closely. Since an alignment will be required, it’ll save money in the long run to take care of any pending issues now.
If you’re replacing an inner tie rod, you’ll already have the outer and the boot off. It’s often much easier to replace them too. Brake/parts cleaner is a good solvent for cleaning out reservoirs and lines, but make sure they’re allowed to completely dry before sealing the system up. I like to use clean power-steering fluid as a final flush to make sure any trace of solvent is gone, so selling a little extra is a good idea.
Tool upsells can include the inner tie-rod tool, an outer tie-rod separator and a grease gun if grease fittings are included on any of the front-end components.
The crowning touch is service information for torque specifications and bleeding procedures. Everyone should have a manual, and you’ve got them on the shelf, right? This is the perfect job to recommend one.
The post
link hidden, please login to view appeared first on link hidden, please login to view.
link hidden, please login to view
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.