Jump to content

  • Welcome to Auto Parts Forum

    Whether you are a veteran automotive parts guru or just someone looking for some quick auto parts advice, register today and start a new topic in our forum. Registration is free and you can even sign up with social network platforms such as Facebook, X, and LinkedIn. 

     

Troubleshooting With NAPA: Why Is My Car Heater Blowing Cold Air?


Recommended Posts

Troubleshooting With NAPA: Why Is My Car Heater Blowing Cold Air?

It’s easy to take modern conveniences for granted. An electric coffee pot brewing while you step out of the room. A garage door that opens with the click of a button. Heated air pumping out of the vents into your vehicle on a cold winter’s morning. But what would you do if those conveniences just stop working? Specifically, how do you fix a car heater that is blowing cold air?

Before you panic, let’s double check the obvious. Is your vehicle warmed up enough from a cold start to push out heated air? For your car heater to function properly, the temperature gauge on your dash (which measures the heat around your engine) should read in the middle, not in the blue cold zone or the red hot zone. If you’re too impatient to wait for your vehicle to run long enough to push out hot air before hitting the road, our experts suggest

link hidden, please login to view
to give yourself some extra time. Next, let’s check the settings of your internal cabin temperature controls. Has your automatic climate control system set itself to defrost only for the first few minutes? Are the vents on your dashboard open and angled properly to disperse a strong current of air?

If those quick checks were the problem, we promise, we won’t tell anyone. However, if you still haven’t found the answer to ‘why is my heater blowing cold air into my car,’ the next step is to lift the hood to remove any possible obstructions, like leaves and debris, that might be blocking the cold air intake system. Airflow backup could also be caused by a dirty, clogged cabin air filter. A

link hidden, please login to view
keeps the air inside your vehicle clean, while also trapping dust and dirt before it enters your heater core and evaporator. Locate your air filter, and remove it for inspection. If the pleats are clogged with debris, it’s due for a change. As part of a maintenance routine, replace your cabin air filter every 20,000 miles or 12 months, whichever comes first.

Another easy solution to solving a car heater problem is topping off the coolant level. If the coolant level is low, not only will heat not reach your heater core, but the built-up heat not being transmitted properly by coolant could damage your engine. If your coolant level is low, top it off. Be aware, it is critical that you also check for signs of damaged hoses or loose connections that could be leaking.

Another common problem that causes a car heater to pump out cold air is if the control valves in the thermostat are stuck open or closed. A thermostat is a temperature regulator in the form of a valve, situated between the engine coolant outlet and the radiator inlet. If possible, fix the stuck valves, or follow these tips for a full

link hidden, please login to view

The Fix Is In, And It Won’t Be Pretty

Any quick fix for no heat in a car was mentioned above. If you are still experiencing car

link hidden, please login to view
heating problems, it is likely a more costly and time-consuming solution. Let’s start with the fan, often called the blower. You should hear the fan running if your heater is turned on, especially full blast. It is possible debris has been lodged or wrapped around the fan, which would cause a tapping noise or popping sound. 

If the airflow is weak coming out of your HVAC system, then it is likely a blown

link hidden, please login to view
. When you turn on your interior heat, a fan behind the core starts up and blows heat into the passenger compartment. If there is no air current, the solution could be as simple as replacing a fuse or as complicated as replacing the fan itself.

If your heater is blowing cold air, the fan motor might be working, but the water pump, actuator or heater core could be failing. A car heater not working could be due to the vital role the

link hidden, please login to view
performs. The water pump is typically driven by the accessory drive belt, serpentine belt or timing belt. A worn-out belt can prevent your water pump from operating at peak efficiency. A slow leak from your water pump will cause residue to build up around the pump. Look for coolant trails leading down from the pump or a gunky deposit around the outside.

Still car heater troubleshooting?

link hidden, please login to view
are critical to controlling heat, the A/C and even defrost. Knocking, clicking and fluctuating air flow could point to a bad actuator, or two. Cold air output could be an issue if either of the hoses connected to your
link hidden, please login to view
have become loose. One hose is tasked with transporting hot coolant from the water pump to the heater core. The second hose returns the coolant to the top of the engine. Worst case scenario, if the area inside your vehicle, underneath the dash, is damp from a continuous leak, it is highly likely your heater core needs replaced.

Most drivers are not equipped to fix a car heater blowing cold air. Just to diagnose the problem can require a jack, jack stand and many, many hand tools. The solution, even if simple, could involve specialty hoses, connections and clamps. To replace an entire heater core entails removing several components to get behind the firewall, or even removing the entire dash inside your cabin. Newer model vehicles, packed with sensitive electronics, make things even more challenging. When in doubt, take your vehicle to

link hidden, please login to view
.

Photo courtesy of

link hidden, please login to view
.

The post

link hidden, please login to view
appeared first on
link hidden, please login to view
.

link hidden, please login to view

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By NAPA
      ATLANTA, May 1, 2024 /
      link hidden, please login to view/ -- Genuine Parts Company (NYSE: GPC), a leading global distributor of automotive and industrial replacement parts, announced today an acquisition for its U.S. Automotive business. Effective April 30, 2024, the company acquired Motor Parts & Equipment Corporation (MPEC). MPEC, founded in 1938, is based in Rockford, Illinois. It is the largest independent owner of NAPA Auto Parts stores in the U.S., operating 181 locations across Illinois, Indiana, Iowa, Michigan, Minnesota and Wisconsin.
      "We are pleased to announce the completion of this strategic acquisition, which aligns with our initiative to own more NAPA stores in priority markets," said Will Stengel, President & CEO-elect of GPC. "We appreciate our long-standing partnership with MPEC's Executive Chairman, Joseph Hansberry, and welcome our new MPEC teammates to GPC and NAPA. We are excited to work together to deliver solutions and value to our customers."
      About Genuine Parts Company
      Established in 1928, Genuine Parts Company is a leading global service organization specializing in the distribution of automotive and industrial replacement parts. Our Automotive Parts Group operates across the U.S., Canada, Mexico, Australasia, France, the U.K., Ireland, Germany, Poland, the Netherlands, Belgium, Spain and Portugal, while our Industrial Parts Group serves customers in the U.S., Canada, Mexico and Australasia. We keep the world moving with a vast network of over 10,700 locations spanning 17 countries supported by more than 60,000 teammates. Learn more at 
      link hidden, please login to view. SOURCE Genuine Parts Company
      For further information: Investor, Timothy Walsh, (678) 934-5349, Senior Director - Investor Relations; Media, Heather Ross, (678) 934-5220, Vice President - Strategic Communications
      link hidden, please login to view
    • By Counterman
      Your customers may be using air tools in a variety of circumstances for an even wider variety of jobs. Here’s how to help them understand why they need to buy the right fitting for the application.
      link hidden, please login to view There are multiple different sizes and styles, and what one shop uses may not be the same as another. The size and style affect the volume of air they can deliver, a critical point because air tools require a specific pressure and volume for proper operation, and restrictive fittings can limit their performance. Here’s a look at the most common sizes and styles found in most automotive shops, and how you can identify them.
      For more ToolIntel training, visit
      link hidden, please login to view. The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view
    • By Dorman Products
      Why do so many used cars from Japan have low mileage?
    • By Dorman Products
      Why a magnetic drain plug is a worthwhile upgrade
    • A-premium Auto Parts:5% OFF with Code GM5.
    • By OReilly Auto Parts
      Automotive Shock and Strut Overview | What do they do and why are they important?

×
  • Create New...