Jump to content

  • Welcome to Auto Parts Forum

    Whether you are a veteran automotive parts guru or just someone looking for some quick auto parts advice, register today and start a new topic in our forum. Registration is free and you can even sign up with social network platforms such as Facebook, X, and LinkedIn. 

     

Schaeffler Releases Technical Bulletins for LuK Product Line


Recommended Posts

Schaeffler Group USA has released a series of technical and service bulletins for the LuK product line.

The bulletins feature bleeding instructions, guided bleeding procedures and installation instructions for LuK slave cylinders, and DMF-to-solid-flywheel conversions.

In conjunction with its REPXPERT service brand, Schaeffler provides technical tips and service information for the LuK product line.

For more than 50 years, LuK has been one of the most trusted and recognized brands in the automotive aftermarket.

“The LuK product catalog now offers over 1,800 parts available in North America, providing repair solutions for a wide range of vehicles” said Mac Eash, Americas North sales manager.

“LuK is the world’s largest manufacturer of clutch components and dual-mass flywheels, bringing OE quality to the aftermarket,” added Jason Haney, Technical Services. “In conjunction with LuK, the Schaeffler REPXPERT brand provides an abundance of information supporting the three Schaeffler aftermarket categories: transmission, engine, and chassis.”

The REPXPERT service portal provides technical information about all Schaeffler products, as well as repair instructions to help with part replacement and problem diagnosis. To access these services and view the bulletins, visit

link hidden, please login to view

The post

link hidden, please login to view
appeared first on
link hidden, please login to view
.

link hidden, please login to view

Link to comment
Share on other sites

Great Tire Deal

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Counterman
      Schaeffler was recently recognized as a top global supplier of 2023 by General Motors during the automaker’s annual Supplier of the Year event in Miami, Florida. This is the fourth time Schaeffler has been honored with this award. Emphasizing shared values between GM and global suppliers, the rigorous selection process distinguishes those who align closely with GM’s principles. These values, rooted in performance, innovation, cultural alignment, and commitment to GM’s ambitious goals, serve as the foundation of the selection criteria.
      “Receiving this prestigious award from General Motors is a testament to our relentless dedication to delivering outstanding quality and performance,” said Klaus Rosenfeld, CEO of Schaeffler AG. “We are honored to be recognized as a top global supplier and look forward to further advancing our partnership with GM in the pursuit of automotive excellence.”
      Photo from left: Pratik Shah, Schaeffler Key Account Manager; Klaus Rosenfeld, Schaeffler CEO;  Peter Layer, GM Purchasing, Executive Director of Chassis Propulsion Structures; Jon Jameson, Schaeffler Sr. Vice President Global Key Account Manager; Allen Pervo, Schaeffler Key Account Manager Jon Jameson, Senior Vice President and GM Global Key Account Manager, Schaeffler added “At Schaeffler, we are immensely proud of our continued partnership with General Motors. This recognition underscores our commitment to innovation and excellence, driving us to exceed expectations in every aspect of our collaboration.”
      The selection process is guided by the GPSC Priority Wheel, which prioritizes the customer in every aspect of supply chain decision-making. The framework’s core values of safety, inclusion and relationships serve as the foundation for other priorities such as sustainability, innovation, execution, resilience, and profitability.
      “We’re honored to partner with these top suppliers who have made notable contributions to our transformation. Together, we’re pushing boundaries, pioneering new technologies and redefining what’s possible,” said Jeff Morrison, vice president, Global Purchasing and Supply Chain, General Motors. “Their innovation and support are critical to helping us deliver the world-class vehicles our customers have to come expect.”
      The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view
    • By NAPA
      Chase Elliott and the No. 9 link hidden, please login to view team qualified ninth for Sunday’s NASCAR Cup Series race at Kansas Speedway. Elliott finished stage one in 10th and followed that up with an 11th-place result in stage two. The 28-year-old driver lined up fourth for an overtime restart in the final stage, driving to a third-place finish. It was Elliott’s second consecutive top-five result and his fifth top-five in the last six Cup Series races. The 2020 NASCAR Cup Series champion ranks third in the points standings, just 55 markers behind the leader. Chase Elliott started ninth in Sunday’s rain-delayed NASCAR Cup Series race at Kansas Speedway and was scored in the 14th position on lap 10 when he reported that his No. 9 NAPA Auto Parts Chevrolet Camaro ZL1 was tight. As the run went on, he radioed that his Chevy’s handling was coming to him. Elliott was in 15th when green-flag pit stops started near lap 30. Crew chief Alan Gustafson called the driver of the No. 9 to pit road on lap 33 for four tires, fuel and an air-pressure adjustment. He was back inside the top 15 once the field cycled through pit stops. By lap 62, he found his way to 10th where he remained to end stage one on lap 80.
      After pitting for four tires and fuel during the stage break, Elliott took the green flag for stage two from the ninth position on lap 89. A chaotic restart shuffled the 28-year-old driver back to 15th, but as the run went on, he made up ground and climbed to 12th by lap 113. As green-flag pit stops were drawing near, Gustafson asked Elliott for feedback on the NAPA Chevrolet. After receiving positive comments from his driver, Gustafson radioed for Elliott to visit pit road on lap 119 for four tires, fuel and an air-pressure adjustment. Once the pit cycle was complete, Elliott was back up to 12th and continued to close in on the cars ahead of him. By lap 143, he re-entered the top 10. He battled hard to remain in the 10th position, but another car just barely beat him to the line to finish stage two, relegating Elliott to 11th.
      Under the stage-ending caution, Elliott reported that he really liked his NAPA Chevy’s balance. He brought the No. 9 Chevrolet to the attention of his pit crew for fuel and four fresh tires. A fast stop gained Elliott three spots on pit road. He started the final stage from the eighth position on lap 173. The early portion of the stage was plagued with cautions, with Elliott and the No. 9 team opting not to pit during the first few yellow flags. When the caution came out again on lap 198, Elliott pitted from the ninth position for four tires and fuel. Varying pit strategies put Elliott in the 20th position as the field lined up for the choose cone. He took the outside lane for the restart on lap 205 and powered his way back inside the top 15 on lap 208. Elliott continued his climb forward, reaching 10th less than 10 laps later. As the long green-flag run went on, he gained two more positions. Elliott was in eighth after a caution came out on lap 261, which sent the race into overtime. When pit road opened, Gustafson called Elliott in for right-side tires and fuel. Elliott was the fourth car off pit road, with the top nine cars all taking two tires. The 2020 Cup Series champion lined up on the outside of the second row for the overtime restart. He battled intensely in the final two laps to take the checkered flag in the third position.
      The finish was Elliott’s second consecutive top-five finish and his fifth top-five in the last six Cup Series races. The Hendrick Motorsports driver leaves Kansas Speedway third in the Cup Series points standings, just 55 markers behind the leader.
      Start / Finish: 9 / 3
      Points Standing / Total: 3rd / 412 pts. (-55)
      Next Race: Sunday, May 12, Darlington Raceway
      How to Watch or Listen: 3:00 p.m. ET on FS1, MRN or SiriusXM
      NAPA: 
      link hidden, please login to view
      Chase Elliott:  link hidden, please login to view
      Hendrick Motorsports:  link hidden, please login to view
      No. 9 Team:  link hidden, please login to view The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view
    • By Counterman
      B’laster Holdings announced the 
      link hidden, please login to view will be expanding into the refrigerants category with a lineup of products created to service and maintain both R-134a and R-1234yf automotive A/C systems. The B’laster A/C line is now available in retailers across the U.S., the company said.
      Features and benefits of the B’laster Refrigerants, according to B’laster Holdings, include:
      Smart Clips allow users to charge by temperature and provide an easier, more accurate way to determine when an AC recharge is complete. Charging an automotive AC system using temperature helps the user avoid overcharging the system. The Safe-Seal formulation permanently repairs micro leaks in both metal and rubber components found in an AC system. The stop leak technology is not reactive with oxygen or humidity because it is not a polymer-based stop leak so it won’t clog your AC system and is safe for use with RRR service machines. Safe-Seal circulates along with the refrigerant in the vehicle’s AC system, sealing micro leaks proactively before they become larger leaks over time. B’laster works with real mechanics to design its product offerings, so users get the perfect pairing of a professional-grade product with DIY package technology. “B’laster has created some of the best automotive care products in the market since 1957,” said Marketing & Product Manager, Morgan Pollen. “With decades of experience to build on, we’re excited about the new technology we’ve developed and incorporated into the B’laster A/C product line. We pride ourselves on being innovative and offering products that both professionals and DIYers can use.”
      The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view
    • By Counterman
      link hidden, please login to view has expanded its parts offerings for vehicles in the United States and Canada, adding over 70 new parts to the INA, LuK and Schaeffler Bearings portfolios in the first quarter of 2024. These additions expand application coverage to an additional 30 million vehicles in operation, the company said. New LuK products include 9 different Clutch Kits, including traditional LuK RepSets and RepSet DMFs. The newly released Clutch Kits provide coverage to many common vehicle applications, including various Toyota, BMW and Volkswagen models, accounting for 4.3 million vehicles in operation, the company said.
      Specifically, LuK 16-126, for Toyota Tacoma 2016-2021 applications, provides coverage for over 1.3 million vehicles in operation, the company said. 
      The Schaeffler Bearings product portfolio has expanded its offering to include 36 new part numbers, including Hub Assembly and Hub Assembly Kits, providing coverage for over 30 million vehicles in operation. With this expansion, Schaeffler said it provides a broader selection of single bearing components, as well as WheelSets for a more comprehensive repair solution.
      The Schaeffler Bearings product expansion includes various EV applications for Tesla and Polestar, showing Schaeffler’s “unwavering commitment to innovation and enhanced engineering capabilities,” the company said. WH13371, for Polestar, Polestar 2 2021-2023, and various Volvo applications, provides coverage for over 400K+ vehicles in operation, according to Schaeffler. 
      The product line expansions of Schaeffler’s three brands in 2024 builds upon those released in 2023. The new products support many types of vehicles, including internal combustion, hybrid and fully electric vehicles under the LuK, INA and Schaeffler Bearings & Seals brands.
      For information, visit
      link hidden, please login to view. The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view
    • By Counterman
      JNPSoft OptiCat, a provider of solutions to support aftermarket auto part suppliers with the mapping, maintenance, development, validation and publishing of their catalog data in industry standards ACES® and PIES, has launched DataLive, an innovative tool that transforms the way manufacturers manage their product data.  With DataLive, manufacturers can now automatically track when their products reach a go live state on the various distribution sell platforms.
      link hidden, please login to view “As part of our commitment to pioneering new and effective products for our customers, we are thrilled to launch DataLive to the Aftermarket Industry”, said David Williams, CEO of JNPSoft OptiCat.  “DataLive gives our partners the ability to strategically follow up with distributors and retailers, perform reviews and accurately forecast supply chain management.”
      “DataLive was designed to determine why sales may not be happening as projected,” said Bryan Thueson, COO JNPSoft OptiCat. “DataLive has flexible packages based on search volume making it an effective tool to help you sell more parts”.
      DataLive aims to automate a process that is currently manual, saving manufacturers time and allowing them to allocate valuable resources to other critical operations.
      For more information about DataLive visit 
      link hidden, please login to view. The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view

×
  • Create New...