Jump to content

  • Welcome to Auto Parts Forum

    Whether you are a veteran automotive parts guru or just someone looking for some quick auto parts advice, register today and start a new topic in our forum. Registration is free and you can even sign up with social network platforms such as Facebook, X, and LinkedIn. 

     

Alloy steel materials for automotive parts


Recommended Posts

Alloy steel refers to the steel grade formed by purposefully adding one or more alloy elements on the basis of carbon steel in order to improve some properties of steel.

Alloying elements have great influence on the properties of steel. For example, adding chromium into carbon steel can improve the strength, hardness and corrosion resistance of steel. Adding nickel can not only improve the strength of steel, but also reduce its toughness. Adding silicon can improve the strength, hardness, fatigue strength and corrosion resistance of steel. The simultaneous use of several alloying elements has a more significant effect on the properties of steel than a single alloy element.

Only after heat treatment can the alloy steel achieve the purpose of improving its mechanical properties.

There are many kinds of alloy steels, which can be roughly divided into the following categories according to their uses: alloy structural steels, alloy tool steels, special performance steels.

Alloy structural steels include low alloy structural steels, alloy carburizing steels and alloy quenched and tempered steels.

Low-alloy structural steels: steels based on low-carbon steels with a small amount of alloy elements (3% - 5%); these steels have a strength of 10% - 30% higher than carbon steels with the same carbon content, and have good plasticity, toughness and weldability. Because of its simplicity in smelting, its production cost is similar to that of carbon steel, it is widely used to make various machine parts and engineering components, such as frame longitudinal beam, cross beam, engine lug, etc., and substituting low alloy structural steel for carbon structural steel can save steel, reduce weight and use reliably. Commonly used steel species are 12MnV, 16Mn and so on.

Alloy carburized steel: parts made of alloy carburized steel, after heat treatment, not only have higher surface hardness and wear resistance, but also can greatly improve the strength and toughness of the center of the parts, thereby improving the ability to resist impact loads; automotive parts withstand high speed, heavy load, strong impact and severe friction, such as piston pins, gears, shafts Parts and important bolts are made of alloy carburized steel after heat treatment.

Alloy quenched and tempered steel: Alloy quenched and tempered steel refers to the steel used after quenched and tempered, with high strength and toughness. If quenched and tempered and then quenched, the wear resistance of parts surface can be improved. It is often used to manufacture parts bearing heavy load and impact load. Such as machine tool spindle, automobile half shaft, connecting rod, steering knuckle, etc.

Other alloy steels and special performance steels: commonly used steel alloy spring steel, rolling bearing steel, alloy tool steel, weathering steel (good atmospheric corrosion resistance), stainless steel, wear-resistant steel, heat-resistant steel.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Dorman Products
      Buy once, cry once: Auto parts that are worth the extra cost
    • By Advance Auto Parts
      RALEIGH, N.C.--(BUSINESS WIRE)-- Advance Auto Parts (NYSE: AAP), a leading automotive aftermarket parts provider, the official auto parts retailer of NASCAR, and official partners of the NTT INDYCAR SERIES and Indianapolis Motor Speedway, is kicking off the summer travel season by offering its Speed Perks loyalty rewards members the chance to win a bucket-list motorsports experience to “Do the Double.”
      This press release features multimedia. View the full release here:  link hidden, please login to view
      On May 26, Advance will send one winner and their guest on a free VIP experience to attend the 108th running of the famed Indianapolis 500 before traveling to North Carolina to watch the Coca-Cola 600, one of NASCAR’s crown jewel events, held at Charlotte Motor Speedway. Fans can enter for their chance to Do the Double from May 1-12 at  link hidden, please login to view. Race fans can enter up to three times per day during the program.
      To be eligible to win, entrants must be members of Advance’s Speed Perks loyalty rewards program. Speed Perks is free to join, and upon signing up, new members will receive $5 off their first in-store or online purchase of $20 or more. Race fans can sign up for Speed Perks at  link hidden, please login to view.
      For race car drivers, doing the double involves competing in both the Indianapolis 500 and Coca-Cola 600 in the same day. It is one of the most challenging feats for any race car driver to attempt, given the significant differences between open-wheeled INDYCAR SERIES cars and NASCAR stock cars. In fact, only four drivers have completed the double since 1994.
      This includes three-time NASCAR Cup Series™ champion Tony Stewart, who won the 1997 INDYCAR SERIES title prior to beginning his hall-of-fame NASCAR career. Stewart is partnering with Advance on  link hidden, please login to view and is the perfect ambassador for the program.
      Stewart has done the double twice. His first attempt came in 1999 when he became the first driver to complete both races in the same day, finishing ninth and fourth, respectively, in the Indianapolis 500 and Coca-Cola 600, driving a total of 1,090 miles.
      Stewart repeated this feat in 2001 and bettered his mark from 1999. He finished on the lead lap in sixth at the Indianapolis 500 before jetting off to Charlotte for the Coca-Cola 600. He improved that finish as well, coming home third in the 600-miler. Stewart completed all 1,100 miles – breaking his own record for most racing miles driven in a single day.
      “This is the chance of a lifetime for a fan to also complete the double by having a front-row seat at the Indianapolis 500 and Coca-Cola 600,” Stewart said. “Advance Auto Parts has put together a fantastic program that is truly unique. Doing the double is history in the making and thanks to Advance, a fan and their guest will get to experience it all in real time. They’ll both be able to say, ‘I was there.’”
      “Historically, doing the double has been a journey reserved for only the world’s most talented and dedicated race car drivers, like Advance brand partner Tony Stewart,” said Junior Word, Advance’s executive vice president, U.S. stores. “Now, one lucky Speed Perks member will have the unique opportunity to ‘get in the driver’s seat’ to experience their own version of the double. Advance is thrilled to work alongside our partners at NASCAR, INDYCAR and Indianapolis Motor Speedway to give two race fans the memory of a lifetime.”
      About Advance Auto Parts
      Advance Auto Parts, Inc. is a leading automotive aftermarket parts provider that serves both professional installer and do-it-yourself customers. As of December 30, 2023, Advance operated 4,786 stores and 321 Worldpac branches primarily within the United States, with additional locations in Canada, Puerto Rico and the U.S. Virgin Islands. The company also served 1,245 independently owned Carquest branded stores across these locations in addition to Mexico and various Caribbean islands. Additional information about Advance, including employment opportunities, customer services, and online shopping for parts, accessories and other offerings can be found at  link hidden, please login to view.

      View source version on  link hidden, please login to view:  link hidden, please login to view
      Investor Relations:
      Elisabeth Eisleben
      T: (919) 227-5466
      E: [email protected]
      Media Relations:
      Darryl Carr
      T: (984) 389-7207
      E: [email protected]
       

      link hidden, please login to view
    • By NAPA
      ATLANTA, May 1, 2024 /
      link hidden, please login to view/ -- Genuine Parts Company (NYSE: GPC), a leading global distributor of automotive and industrial replacement parts, announced today an acquisition for its U.S. Automotive business. Effective April 30, 2024, the company acquired Motor Parts & Equipment Corporation (MPEC). MPEC, founded in 1938, is based in Rockford, Illinois. It is the largest independent owner of NAPA Auto Parts stores in the U.S., operating 181 locations across Illinois, Indiana, Iowa, Michigan, Minnesota and Wisconsin.
      "We are pleased to announce the completion of this strategic acquisition, which aligns with our initiative to own more NAPA stores in priority markets," said Will Stengel, President & CEO-elect of GPC. "We appreciate our long-standing partnership with MPEC's Executive Chairman, Joseph Hansberry, and welcome our new MPEC teammates to GPC and NAPA. We are excited to work together to deliver solutions and value to our customers."
      About Genuine Parts Company
      Established in 1928, Genuine Parts Company is a leading global service organization specializing in the distribution of automotive and industrial replacement parts. Our Automotive Parts Group operates across the U.S., Canada, Mexico, Australasia, France, the U.K., Ireland, Germany, Poland, the Netherlands, Belgium, Spain and Portugal, while our Industrial Parts Group serves customers in the U.S., Canada, Mexico and Australasia. We keep the world moving with a vast network of over 10,700 locations spanning 17 countries supported by more than 60,000 teammates. Learn more at 
      link hidden, please login to view. SOURCE Genuine Parts Company
      For further information: Investor, Timothy Walsh, (678) 934-5349, Senior Director - Investor Relations; Media, Heather Ross, (678) 934-5220, Vice President - Strategic Communications
      link hidden, please login to view
    • By Counterman
      Paul Donahue (at left) will transition from chairman and CEO to executive chairman. William Stengel, II, currently president and COO, will succeed Donahue as president and CEO of GPC and will serve as a member of the board of directors.
      Genuine Parts Company announced that Paul D. Donahue will transition from chairman and CEO to executive chairman, effective June 3, 2024. At that time, William P. Stengel, II, currently president and COO, will succeed Donahue as president and CEO of GPC and will serve as a member of the board of directors.
      “The board is confident that Will is the right person to lead GPC into the future and that the company is positioned to continue delivering value to our customers and shareholders,” said John D. Johns, lead independent director of GPC’s board of directors. “During his tenure at GPC, he’s worked closely with Paul to shape the company’s strategic priorities and with the global leadership teams to evolve the business and deliver outstanding performance.”
      Stengel joined the company in 2019 as executive vice president and chief transformation officer with nearly two decades of leadership and professional experience. In 2021, he was promoted to serve as only the eighth president in the company’s history. His role expanded to president and chief operating officer in 2023. Prior to joining GPC, he served in various executive leadership roles at HD Supply, including as president and CEO of HD Supply Facilities Maintenance, as well as at The Home Depot and in various investment banking roles.
      “I am humbled and honored for the opportunity to lead Genuine Parts Company and especially grateful for my GPC teammates and the support of Paul and the board of directors,” said Stengel. “We will continue to build on the strong foundation laid over many years as we work to deliver solutions for our customers, invest in talent and capabilities and create value for our shareholders.”
      “On behalf of the board of directors, I want to extend our heartfelt appreciation to Paul for his remarkable leadership spanning over two decades, culminating as chairman and CEO,” said Johns. “Under his leadership, the company simplified its business mix, expanded its global footprint and delivered significant shareholder value. Paul’s positive impact on GPC has been remarkable, and we look forward to his continued guidance as he transitions to his new role as executive chairman.” 
      “I am incredibly proud of all we have accomplished as One GPC team, and equally grateful for the 20+ years I have been privileged to work for this amazing company. As I transition from the CEO role, I am pleased to welcome Will as only the sixth CEO in our company’s 96-year history,” said Donahue. “I have every confidence in Will, our global leadership teams and our board of directors to deliver on our vision to be the leading global automotive and industrial parts distributor and solutions provider.”
      The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view
    • A-premium Auto Parts:5% OFF with Code GM5.
    • By NAPA
      ATLANTA, April 30, 2024 /
      link hidden, please login to view/ -- Genuine Parts Company (NYSE: GPC), a leading global distributor of automotive and industrial replacement parts, announced that its shareholders elected Mr. Charles "Chuck" K. Stevens as a new director of the company. Additionally, Mr. E. Jenner Wood has retired as a director. Mr. Stevens held the position of executive vice president and chief financial officer of General Motors Company from 2014 to 2018. Prior to that role, he held a variety of leadership positions within General Motors Company's finance team.
        Genuine Parts Company Chuck-Stevens "We want to extend our sincere gratitude to Jenner for his nearly 10 years of service on our board. We thank him for his leadership and many contributions to GPC," said Paul Donahue, Chairman and CEO. "As Jenner retires, we would also like to welcome Chuck to our Board of Directors. His extensive experience in the automotive industry, along with his financial and accounting expertise, make him a valuable addition to our board. We look forward to his future contributions to GPC."
      In addition, GPC's Board of Directors declared a regular quarterly cash dividend of one dollar ($1.00) per share on the company's common stock. The dividend is payable July 1, 2024 to shareholders of record June 7, 2024.
      About Genuine Parts Company
      Established in 1928, Genuine Parts Company is a leading global service organization specializing in the distribution of automotive and industrial replacement parts. Our Automotive Parts Group operates across the U.S., Canada, Mexico, Australasia, France, the U.K., Ireland, Germany, Poland, the Netherlands, Belgium, Spain and Portugal, while our Industrial Parts Group serves customers in the U.S., Canada, Mexico and Australasia. We keep the world moving with a vast network of over 10,700 locations spanning 17 countries supported by more than 60,000 teammates. Learn more at 
      link hidden, please login to view. SOURCE Genuine Parts Company
      For further information: Investor contact: Timothy Walsh, (678) 934-5349, Senior Director - Investor Relations; Media contact: Heather Ross, (678) 934-5220, Vice President - Strategic Communications
      link hidden, please login to view

×
  • Create New...