Jump to content

  • Welcome to Auto Parts Forum

    Whether you are a veteran automotive parts guru or just someone looking for some quick auto parts advice, register today and start a new topic in our forum. Registration is free and you can even sign up with social network platforms such as Facebook, X, and LinkedIn. 

     

AMSOIL Adds Synthetic 10W-30, 5W-40 Products To ATV/UTV Line


Recommended Posts

AMSOIL is launching two new synthetic lubricants for ATV/UTV applications, “providing riders with high-performance upgrades from OEM-branded oils,” the company announced.  

AMSOIL synthetic ATV/UTV motor oil now is available in 10W-30 and 5W-40 viscosities, joining existing 10W-40 and 5W-50 viscosities to round out the product line.

AMSOIL synthetic ATV/UTV motor oil is designed to withstand the severe operating conditions found in modern ATV/UTV applications. It provides outstanding protection while racing, hauling, plowing or navigating tough terrain,” according to the company.

“Thanks to its robust all-season synthetic formula, AMSOIL ATV/UTV oil remains fluid in sub-zero temperatures for exceptional protection during cold starts, and resists thinning and mechanical shear in extreme heat to protect ATV/UTV engines in hard-working or desert conditions,” AMSOIL added.

AMSOIL synthetic ATV/UTV motor oil helps fight rust and corrosion to prolong equipment life. The wet-clutch-compatible oil is formulated without friction modifiers to promote smooth shifting and positive clutch engagement, allowing riders to confidently and safely push their machines to the limit.

“We designed the ATV/UTV family of lubricants from the ground up to address the unique demands of these off-road machines,” said Len Groom, AMSOIL senior market manager – powersports. “Whether they’re used for work or play, ATVs and UTVs are frequently pushed to the limit, generating high heat that can challenge lubricants’ ability to maintain adequate protection. AMSOIL Synthetic ATV/UTV Motor Oil is designed to protect against the damaging effects of extreme heat, and we’re excited to expand the line to offer upgraded AMSOIL protection to more ATV/UTV makes and models.”

AMSOIL 10W-30 synthetic ATV/UTV motor oil is recommended for use in applications that require a 10W-30 oil, including those made by Honda. AMSOIL 5W-40 synthetic ATV/UTV motor oil is recommended for use in applications that require a 5W-40 oil, including those made by Can-Am and Kawasaki. AMSOIL synthetic ATV/UTV motor oil is Warranty Secure and will not void ATV or UTV warranties.

The post

link hidden, please login to view
appeared first on
link hidden, please login to view
.

link hidden, please login to view

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By NAPA
      Chase Elliott and the No. 9 link hidden, please login to view team qualified ninth for Sunday’s NASCAR Cup Series race at Kansas Speedway. Elliott finished stage one in 10th and followed that up with an 11th-place result in stage two. The 28-year-old driver lined up fourth for an overtime restart in the final stage, driving to a third-place finish. It was Elliott’s second consecutive top-five result and his fifth top-five in the last six Cup Series races. The 2020 NASCAR Cup Series champion ranks third in the points standings, just 55 markers behind the leader. Chase Elliott started ninth in Sunday’s rain-delayed NASCAR Cup Series race at Kansas Speedway and was scored in the 14th position on lap 10 when he reported that his No. 9 NAPA Auto Parts Chevrolet Camaro ZL1 was tight. As the run went on, he radioed that his Chevy’s handling was coming to him. Elliott was in 15th when green-flag pit stops started near lap 30. Crew chief Alan Gustafson called the driver of the No. 9 to pit road on lap 33 for four tires, fuel and an air-pressure adjustment. He was back inside the top 15 once the field cycled through pit stops. By lap 62, he found his way to 10th where he remained to end stage one on lap 80.
      After pitting for four tires and fuel during the stage break, Elliott took the green flag for stage two from the ninth position on lap 89. A chaotic restart shuffled the 28-year-old driver back to 15th, but as the run went on, he made up ground and climbed to 12th by lap 113. As green-flag pit stops were drawing near, Gustafson asked Elliott for feedback on the NAPA Chevrolet. After receiving positive comments from his driver, Gustafson radioed for Elliott to visit pit road on lap 119 for four tires, fuel and an air-pressure adjustment. Once the pit cycle was complete, Elliott was back up to 12th and continued to close in on the cars ahead of him. By lap 143, he re-entered the top 10. He battled hard to remain in the 10th position, but another car just barely beat him to the line to finish stage two, relegating Elliott to 11th.
      Under the stage-ending caution, Elliott reported that he really liked his NAPA Chevy’s balance. He brought the No. 9 Chevrolet to the attention of his pit crew for fuel and four fresh tires. A fast stop gained Elliott three spots on pit road. He started the final stage from the eighth position on lap 173. The early portion of the stage was plagued with cautions, with Elliott and the No. 9 team opting not to pit during the first few yellow flags. When the caution came out again on lap 198, Elliott pitted from the ninth position for four tires and fuel. Varying pit strategies put Elliott in the 20th position as the field lined up for the choose cone. He took the outside lane for the restart on lap 205 and powered his way back inside the top 15 on lap 208. Elliott continued his climb forward, reaching 10th less than 10 laps later. As the long green-flag run went on, he gained two more positions. Elliott was in eighth after a caution came out on lap 261, which sent the race into overtime. When pit road opened, Gustafson called Elliott in for right-side tires and fuel. Elliott was the fourth car off pit road, with the top nine cars all taking two tires. The 2020 Cup Series champion lined up on the outside of the second row for the overtime restart. He battled intensely in the final two laps to take the checkered flag in the third position.
      The finish was Elliott’s second consecutive top-five finish and his fifth top-five in the last six Cup Series races. The Hendrick Motorsports driver leaves Kansas Speedway third in the Cup Series points standings, just 55 markers behind the leader.
      Start / Finish: 9 / 3
      Points Standing / Total: 3rd / 412 pts. (-55)
      Next Race: Sunday, May 12, Darlington Raceway
      How to Watch or Listen: 3:00 p.m. ET on FS1, MRN or SiriusXM
      NAPA: 
      link hidden, please login to view
      Chase Elliott:  link hidden, please login to view
      Hendrick Motorsports:  link hidden, please login to view
      No. 9 Team:  link hidden, please login to view The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view
    • By Counterman
      ZF Aftermarket announced the launch of 33 new part numbers in March for SACHS Continuous Damping Control (CDC) shock absorbers for approximately 1.6 million passenger vehicles in operation in the U.S. and Canada (USC). The new products expand ZF’s line of SACHS CDC shock absorbers by more than 70 percent, reflecting growing demand for advanced damping technology in the aftermarket, according to ZF.
      The CDC part numbers cover a variety of BMW and Audi models, among others. The CDC electronic damper system has been in large-scale original equipment production since the mid-2000s and is offered for many vehicles, from luxury cars to SUVs to compact cars. ZF said it has produced more than 35 million CDC dampers globally and plans to release additional CDC part numbers in the USC region throughout 2024.
      “Demand for continuous damping control shocks is skyrocketing in the USC aftermarket, so we’re very excited to deliver more of this advanced damping technology to our customers, and to continue building the SACHS CDC product line,” said Mark Cali, head of independent aftermarket, USC for ZF Aftermarket.
      The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view
    • By Dorman Products
      Conduct-Tite Products | Counterperson Training from Dorman Training Center
    • By Dorman Products
      HELP! Products | Counterperson Training from Dorman Training Center
    • A-premium Auto Parts:5% OFF with Code GM5.
    • By Counterman
      Carter has expanded its line of electrical auxiliary water pumps to include three new part numbers tailored specifically for Tesla vehicles.
      “With a focus on meeting the unique demands of Tesla vehicles, these auxiliary water-pump SKUs are engineered to efficiently move fluid in high-temperature environments, keeping pace with the rapidly evolving technologies found in modern engines,” the company said in a news release.
      The new part numbers cater specifically to Tesla models, complementing Carter’s comprehensive range of water pumps that already cover 95% of domestic and import VIO,
      link hidden, please login to view noted. The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view

×
  • Create New...