Jump to content

  • Welcome to Auto Parts Forum

    Whether you are a veteran automotive parts guru or just someone looking for some quick auto parts advice, register today and start a new topic in our forum. Registration is free and you can even sign up with social network platforms such as Facebook, X, and LinkedIn. 

     

Continental Highlights Line Of ATE Replacement Brake Fluids


Recommended Posts

Continental’s line of ATE replacement brake fluids feature special formulations designed to help maximize brake-system performance in all types of electronic, hydraulic and racing systems.

The full line includes ATE Super DOT 5.1, the technological standard for brake fluids; ATE SL.6 Brake Fluid, the ideal replacement for ESP, ABS and ASR electronic brake systems; ATE SL for hydraulic brake and clutch systems; and ATE TYP 200 for high-performance and racing applications.

ATE Super DOT 5.1 Premium Brake Fluid’s formulation sets a new performance standard for brake fluids, according to Continental. It combines a high wet boiling point of 356 F with outstanding viscosity at very low temperatures to deliver a capability that previous brake fluids were unable to achieve. With a maximum of 750 mm²/sec. at minus 40 F, ATE Super DOT 5.1 viscosity values exceed even those of ISO Class 6, which are well above the specifications for DOT 5.1 class brake fluids, according to the company.

ATE SL.6 brake fluidis the optimum replacement for DOT 4 fluid in ESP, ABS and ASR brake systems. Its low-viscosity texture allows electronic brake systems to react more quickly for improved safety. ATE SL.6 offersexcellent application coverage for the advanced braking systems used in high-end vehicle makes and models.

ATE SL brake fluidis an excellent DOT 4 replacement for use as hydraulic fluid in brake and clutch systems. It features a mixture of polyethylene glycol ethers, polyethylene glycols and boric acid esters of polyethylene glycols with anti-corrosion/anti-aging agents. ATE SL meets and exceeds the requirements of the brake-fluid standards FMVSS-No. 116 – DOT 4, SAE J1704 and ISO 4925, Class 4, among others.

ATE TYP 200 brake fluid exceeds all DOT 4 standards and excels under the extreme demands of high-performance driving. Compatible with all DOT 3, DOT 4 and DOT 5.1 brake fluids, the formula delivers a minimal drop in boiling point due to outstanding water-binding properties that result in a long-lasting fluid that can provide optimal performance for up to three years under normal highway driving conditions, according to Continental. The high wet and dry boiling points make this fluid an excellent choice for street-driven vehicles as well.

“ATE brake fluids are the result of many years of experience and expertise in developing OE brake systems,” notes Dan Caciolo, head of product management at Continental. “The viscosity, boiling point and pressure behavior of our fluids interact perfectly to allow the braking system to react quickly and reliably in any application. Our boiling points and viscosity exceed legal specifications, while our high-quality additives help deliver outstanding corrosion protection and optimum compatibility with brake system’s sealing materials.”

ATE is an aftermarket brand of Continental. For more information, visit

link hidden, please login to view
 or contact [email protected].

The post

link hidden, please login to view
appeared first on
link hidden, please login to view
.

link hidden, please login to view

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By NAPA
      Chase Elliott and the No. 9 link hidden, please login to view team qualified ninth for Sunday’s NASCAR Cup Series race at Kansas Speedway. Elliott finished stage one in 10th and followed that up with an 11th-place result in stage two. The 28-year-old driver lined up fourth for an overtime restart in the final stage, driving to a third-place finish. It was Elliott’s second consecutive top-five result and his fifth top-five in the last six Cup Series races. The 2020 NASCAR Cup Series champion ranks third in the points standings, just 55 markers behind the leader. Chase Elliott started ninth in Sunday’s rain-delayed NASCAR Cup Series race at Kansas Speedway and was scored in the 14th position on lap 10 when he reported that his No. 9 NAPA Auto Parts Chevrolet Camaro ZL1 was tight. As the run went on, he radioed that his Chevy’s handling was coming to him. Elliott was in 15th when green-flag pit stops started near lap 30. Crew chief Alan Gustafson called the driver of the No. 9 to pit road on lap 33 for four tires, fuel and an air-pressure adjustment. He was back inside the top 15 once the field cycled through pit stops. By lap 62, he found his way to 10th where he remained to end stage one on lap 80.
      After pitting for four tires and fuel during the stage break, Elliott took the green flag for stage two from the ninth position on lap 89. A chaotic restart shuffled the 28-year-old driver back to 15th, but as the run went on, he made up ground and climbed to 12th by lap 113. As green-flag pit stops were drawing near, Gustafson asked Elliott for feedback on the NAPA Chevrolet. After receiving positive comments from his driver, Gustafson radioed for Elliott to visit pit road on lap 119 for four tires, fuel and an air-pressure adjustment. Once the pit cycle was complete, Elliott was back up to 12th and continued to close in on the cars ahead of him. By lap 143, he re-entered the top 10. He battled hard to remain in the 10th position, but another car just barely beat him to the line to finish stage two, relegating Elliott to 11th.
      Under the stage-ending caution, Elliott reported that he really liked his NAPA Chevy’s balance. He brought the No. 9 Chevrolet to the attention of his pit crew for fuel and four fresh tires. A fast stop gained Elliott three spots on pit road. He started the final stage from the eighth position on lap 173. The early portion of the stage was plagued with cautions, with Elliott and the No. 9 team opting not to pit during the first few yellow flags. When the caution came out again on lap 198, Elliott pitted from the ninth position for four tires and fuel. Varying pit strategies put Elliott in the 20th position as the field lined up for the choose cone. He took the outside lane for the restart on lap 205 and powered his way back inside the top 15 on lap 208. Elliott continued his climb forward, reaching 10th less than 10 laps later. As the long green-flag run went on, he gained two more positions. Elliott was in eighth after a caution came out on lap 261, which sent the race into overtime. When pit road opened, Gustafson called Elliott in for right-side tires and fuel. Elliott was the fourth car off pit road, with the top nine cars all taking two tires. The 2020 Cup Series champion lined up on the outside of the second row for the overtime restart. He battled intensely in the final two laps to take the checkered flag in the third position.
      The finish was Elliott’s second consecutive top-five finish and his fifth top-five in the last six Cup Series races. The Hendrick Motorsports driver leaves Kansas Speedway third in the Cup Series points standings, just 55 markers behind the leader.
      Start / Finish: 9 / 3
      Points Standing / Total: 3rd / 412 pts. (-55)
      Next Race: Sunday, May 12, Darlington Raceway
      How to Watch or Listen: 3:00 p.m. ET on FS1, MRN or SiriusXM
      NAPA: 
      link hidden, please login to view
      Chase Elliott:  link hidden, please login to view
      Hendrick Motorsports:  link hidden, please login to view
      No. 9 Team:  link hidden, please login to view The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view
    • By garryhe
      Explore Top-Quality Brake Pads for Toyota Models at Our Factory!
      Hello everyone!
      As a professional brake pad manufacturing factory, we are proud to announce that we cover over 98% of global automotive brands and have cataloged every model for easy reference by our customers.
      We are excited to introduce our extensive range of brake pads for various Toyota models. You can effortlessly browse and purchase them through our website. Whether you need brake pads for the classic Camry, the stylish Corolla, or the robust Tacoma, we have you covered.
      Our brake pads boast premium materials, and expert craftsmanship, and undergo rigorous quality control to ensure the highest levels of safety and performance. We guarantee that our products will exceed your expectations and provide you with confidence and peace of mind in your driving experience.
      Whether you're a professional mechanic or an automotive enthusiast, we welcome you to explore our wide range of brake pad offerings at our factory. We are confident that you will be satisfied with the quality of our products and services.
      Visit our website to discover more: 
      link hidden, please login to view and  link hidden, please login to view Thank you for choosing us, and we look forward to collaborating with you!
      Thank you!
    • By Dorman Products
      Cost-effective replacement intake manifold for Ford Coyote 5.0s | Dorman OE FIX 615-916
    • By Counterman
      ZF Aftermarket announced the launch of 33 new part numbers in March for SACHS Continuous Damping Control (CDC) shock absorbers for approximately 1.6 million passenger vehicles in operation in the U.S. and Canada (USC). The new products expand ZF’s line of SACHS CDC shock absorbers by more than 70 percent, reflecting growing demand for advanced damping technology in the aftermarket, according to ZF.
      The CDC part numbers cover a variety of BMW and Audi models, among others. The CDC electronic damper system has been in large-scale original equipment production since the mid-2000s and is offered for many vehicles, from luxury cars to SUVs to compact cars. ZF said it has produced more than 35 million CDC dampers globally and plans to release additional CDC part numbers in the USC region throughout 2024.
      “Demand for continuous damping control shocks is skyrocketing in the USC aftermarket, so we’re very excited to deliver more of this advanced damping technology to our customers, and to continue building the SACHS CDC product line,” said Mark Cali, head of independent aftermarket, USC for ZF Aftermarket.
      The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view
    • A-premium Auto Parts:5% OFF with Code GM5.
    • By OReilly Auto Parts
      Which Brake Pads Are Right For My Vehicle? | Brake Pad Selection

×
  • Create New...