Jump to content

Recommended Posts

Posted

In spite of the skyrocketing cost of fuel, I’m still looking forward to a couple of summer road trips. While there’s nothing we can do about the prices at the pump, keeping our vehicles properly maintained can help those gallons go further.

Getting ready for a long trip is the perfect excuse (not that you really need one) for your customers to check off a number of maintenance items that can help make their time behind the wheel more enjoyable. It also can make it a little less expensive!

Many people wait until the last moment to do a “pre-trip inspection.” How many times have you had a customer tell you that they need a laundry list of items “immediately” because they’re planning on leaving for a long trip “tomorrow?”

Sometimes these requests are easy to fulfill, especially if they’re simple maintenance items. Other times, the customer really should have addressed the issue long before now! Either way, we can help in a number of ways to get them on their way safely and efficiently.

While the traditional “tune-up” is fast becoming obsolete, one of the essential items from this service is still a common sale.

Changing the engine air filter is a quick and easy way to ensure proper airflow into the engine, and that filter also is the first line of defense against dirt and other contaminants. A clogged, dirty or damaged filter also can expose the MAF sensor to contaminants that alter its signal to the PCM, which can lead to a rich condition, wasting fuel. Examination of the filter also can indicate if there are worn piston rings or a fault in the PCV system. While examining the air intake, also look for cracks or gaps in the tube between the airbox and the throttle body, which can allow unmetered air into the engine, skewing sensor readings and altering fuel efficiency.

Changing the cabin air filter not only will make the trip more comfortable, but it also can potentially lessen the strain on the HVAC system. Turning up the A/C to compensate for a clogged cabin filter can increase the load on the belt-driven compressor and therefore the engine. While you’re at it, have a look at the belt(s) too. Worn, glazed or slipping belts can cause noise, friction and even cooling-system or charging-system issues – which may leave you on the roadside rather than at your destination.

Battery condition and state-of-charge should be tested periodically, and a pre-trip inspection is a great time to offer this service to your customers. No-start conditions are inconvenient at any time, but can cause much more anxiety when you’re miles away from familiar territory or service providers.

Breakdowns become more inconvenient and time-consuming if you’re travelling to your destination on a tight schedule, or if you’ve drawn the “late-night” driving shift. If you do break down after dark, having functioning lights (especially your four-way flashers) makes you more visible to passing motorists, as well as emergency service providers like police or roadside assistance.

Lighting and visibility checks also should include topping off the washer solvent, making sure your washer nozzles and pump are functioning correctly and changing wiper blades as needed, including the rear blade (if equipped).

Fluids, filters, belts, wipers and electrical items all are tangible products, but one of the most important road-trip essentials is actually invisible … AIR! Properly inflated tires can have positive effects on fuel mileage, handling, braking and even passenger ride quality. Most of the vehicles on the road today have TPMS sensors to keep tabs on the tires, but it’s not a bad idea to get out the old-fashioned tire gauge now and then to double-check their calibration. On most vehicles, the spare tire is not TPMS-equipped, and should be checked manually for proper inflation.

If a vehicle is not equipped with a spare, verify that the on-board compressor or emergency fix-a flat is accounted for!

Speaking of inflation, the cost of the old “penny test” for tread depth has gone up to 25 cents. The old rule of thumb was that if you placed a penny into your tire tread, the top of Lincoln’s head should NOT be visible on a good tire. The distance from the edge of a penny to the top of Abe’s head equates to a tread depth of 2/32 of an inch, which is the DOT minimum before recommended replacement.

Many tire manufacturers now recommend the use of a quarter for this “test.” The top of George’s head is 4/32 from the edge of a quarter, which gives consumers a little more warning before needing to discard their current tires. I still prefer to use an actual tread-depth gauge, but pocket change still works in a pinch. Wherever the destination this summer, your customers can save money, save fuel and save time by spending a little on preventative maintenance before they pack the car and pull out of the driveway!

The post

link hidden, please login to view
appeared first on
link hidden, please login to view
.

link hidden, please login to view

  • 2 months later...
Posted

Drivers always neglect to prepare the car for long trips. I have seen people who went to cities a thousand kilometres away without a spare wheel. They do not think about their safety and the safety of their passengers. In addition to preparing the car for a long journey, you need to collect a first aid kit and other important first aid items.

Posted
19 hours ago, Merleroop said:

Drivers always neglect to prepare the car for long trips. I have seen people who went to cities a thousand kilometres away without a spare wheel. They do not think about their safety and the safety of their passengers. In addition to preparing the car for a long journey, you need to collect a first aid kit and other important first aid items.

They do not think about their safety and the safety of their passengers. In addition to preparing the car for a long journey, you need to collect a first aid kit and other important first aid items.  I keep all my stuff in the garage since the car is under

link hidden, please login to view
. I like it when I can make a room with things and not worry about hitting them while the car is moving in.  Thank you for your advice! I think they will be useful to many.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Nancy Bitter
      When it comes to maintaining your vehicle, finding reliable and affordable auto parts is essential. JM Used Auto Spare Parts offers a variety of used car parts that can help extend the life of your vehicle without breaking the bank. From engines to transmissions, their inventory includes high-quality parts that have been thoroughly inspected to ensure they meet industry standards.
      Using JM Used Auto Spare Parts can be a game-changer for car owners and mechanics alike, offering savings without compromising on quality. The key to a successful car repair or upgrade lies in finding the right parts, and with <a href=" https://jmusedautospareparts.com/">JM Used Auto Spare Parts</a>, that becomes much easier. They provide a vast selection of components that are compatible with various makes and models.
      Not only does JM Used Auto Spare Parts offer great prices, but their commitment to customer satisfaction ensures that you’ll find the parts you need quickly and easily. With great deals and fast shipping, you’ll be able to complete your repair or upgrade project on time and within budget.
      Whether you're a DIY enthusiast or a professional mechanic, JM Used Auto Spare Parts is the place to go for all your used auto parts needs. Browse through their extensive inventory today and get your vehicle back on the road in no time.
    • By OReilly Auto Parts
      How To Detail Your Vehicle's Interior
    • By Eliauk
      Small refrigerated vans are mainly used for temperature-sensitive items such as food or medicine, so temperature is the key to small refrigerated vans. If the temperature is not adjusted properly, the goods will not be stored or transported in a perfect state. The following are 8 maintenance tips for refrigerated delivery van.
      1. Before driving, check whether the oil used in the refrigerated van is sufficient, and the oil can reach the destination smoothly.
      2.Check that the battery is connected well, make sure that the wire connecting the battery is not damaged, and remember to check whether the electrolyte is sufficient.
      3. Before driving a s refrigerated van, check whether there are any parts that are not tightened or other problems. If there are any problems, you must first eliminate the fault before driving on the road.
      4. make sure that the drainage device is unobstructed.
      5. When loading goods, remember to keep the goods away from the air outlet of the evaporator, so that the cold air in the cargo box keeps circulating, and there is no place where air-conditioning cannot be obtained.
      6. Check whether the coolant is correct. The pointer of the liquid level meter should be within the normal range. If the refrigerating liquid is insufficient, the refrigerating liquid should be refilled in time.
      7. Adjust the seat belt to the extent that it is not loose or tight.
      8. Check whether the electrical and wire connections are stable. Whether the wires are cracked or damaged.
      During our normal use, the maintenance are also inseparable. The refrigeration unit is maintained according to the working hours of the engine. The maintenance time of small 
      link hidden, please login to view is 500-700 hours. It needs to be replaced, air filter element, oil filter element, fuel filter element, and check the tightness of the belt, whether there is leakage in the refrigeration system, etc. However, in order to meet the needs of environmental protection, some brands of refrigeration units try to reduce the damage to the environment and reduce the emission of harmful substances. Therefore, synthetic engine oil or semi-synthetic engine oil is used to replace ordinary engine oil, thereby extending the maintenance time of the engine. Do maintenance once every 2000 hours.
    • By OReilly Auto Parts
      DIY – How to Clean, Wash & Wax Your Vehicle
    • Government UFO Files
    • By OReilly Auto Parts
      How to Clean, Wash & Wax Your Vehicle

×
  • Create New...