Jump to content

Recommended Posts

Posted

The Charles Dickens classic “A Tale of Two Cities” produced one of the most famous opening lines in all of literature: “It was the best of times, it was the worst of times … ”

More than 150 years after “A Tale of Two Cities” was published, the phrase is an apt description of what life has been like for aftermarket suppliers, distributors and retailers during the COVID-19 pandemic.

As Paul McCarthy, president and CEO of the Automotive Aftermarket Suppliers Association (AASA), kicked off the 2022 AASA Vision Conference in Dearborn, Michigan, he observed that the line “rings true in this age of uncertainty.”

“It has been some of the hardest times to simply do our jobs – to just get our products to the customer – yet it has also been some of the greatest prosperity that the aftermarket has ever experienced,” McCarthy said.

Stimulus-driven DIY sales have led to the best of times for the aftermarket’s publicly traded parts retailers, and they reported record growth in 2020 and 2021. At the same time, supply chain disruptions have made it challenging for some suppliers and distributors to get their hands on parts and raw materials.

“Typically, part of our industry’s appeal is our slow, steady, reliable growth – our consistent cash-flow generation,” McCarthy said. “During the pandemic, we seem to have found another level of demand for our products. And we’ve also been in a battle for availability. The reality over the last two years is that if you could get the part to the customer, they would likely buy it.”

While the past two years have been prosperous for many aftermarket participants, it’s also been the worst of times in the sense that the economy has been hit with “a flock of black swans.” Even before this once-in-a-century pandemic hit, the aftermarket was grappling with tariffs on imported Chinese goods  as well as the biggest changes to U.S. trade policies in decades.

“We haven’t had a supply chain disruption of this magnitude for 75 years,” McCarthy said. “It’s been over 40 years since we’ve seen inflation like this. It’s been decades since we’ve seen a job market this tight. If that wasn’t enough, members tell us that we’ve experienced some of the highest levels of government intervention in the aftermarket, maybe in our history.”

On top of that, there’s a land war in Europe, and U.S.-Sino relations are as tense as they’ve been in decades. Potential curveballs on the horizon include more interest-rate hikes, gas-price increases and the specter of Russian cyberattacks.

Still, although it’s “an environment where it may not be easy for us,” it’s one “where we can do very well.”

“Our ability – despite all these obstacles – to fill orders, to keep our businesses running, to sustain our teams, to work together up and down the value chain, it’s frankly amazing how well the aftermarket has performed,” McCarthy added. “It proves our resilience and our endurance. So don’t expect things to get any easier, but the aftermarket and aftermarket suppliers, we’ve shown that we matter.”

A New Golden Age?

Despite all the “bumps in the road,” McCarthy posed this question to AASA Vision attendees: “Is there a chance that these strong sales that we’ve seen are not a blip, that instead they are the start of a new golden age?”

“The transformative cultural shifts that we’re seeing as a result of the pandemic, we think they bode well for the future of the aftermarket – that we are leaving the pandemic with a more auto-centric lifestyle than when we went into it,” McCarthy asserted.

To buttress his point, he noted that used-car prices are higher than they’ve been since World War II; there are more than 280 million vehicles in operation in the United States; and the miles-driven recovery “has exceeded all forecasts.”  

With commuters and travelers still fearful of mass transportation, “Americans are moving toward more car-centric locales and lifestyles,” he added.

“We see it in consumers’ desire for more space. We see it in the house prices, in people moving to the West, to the South, to smaller cities, to exurbs. Coming out of COVID, where most Americans now seem to want to live, they need a car or a third or a fourth car. They need us, the aftermarket.”

While technology might be a source of angst for some, “this unstoppable march of increasing vehicle content has been incredibly powerful for the aftermarket ticket,” McCarthy declared. “And we think that will continue.”

And the increasing in-vehicle connectivity “is making our time in the car more entertaining, more productive, more appealing.”

“We would argue that this is a global opportunity that the pandemic underscored to consumers around the world: the safety, the appeal of individual transport and the freedom that it brings. So we think we could look back in 2040, 2050, and say that this was the start of a new golden age of transportation. And we could say that we grabbed this opportunity and we created new ways forward.”

The post

link hidden, please login to view
appeared first on
link hidden, please login to view
.

link hidden, please login to view

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By GreenGears Auto Limited
      Published by GreenGears Auto  |  8 min read  |  Subframe Buying Guide
      When a subframe or crossmember fails, the temptation is to save money with an aftermarket replacement. The price difference looks compelling — an aftermarket subframe for a Honda Accord might cost $120 vs. $280 for a used OEM unit. But for structural chassis components, that price difference carries consequences that don't show up until 6,000 miles later. This guide explains exactly what those consequences are, and why used OEM is almost always the right call for subframes and engine cradles. What Is a Subframe and Why Does It Matter So Much?
      The subframe — also called an engine cradle, K-frame, or suspension crossmember — is the structural foundation of your vehicle's front or rear suspension. Every suspension mounting point, steering rack, and engine/transmission mount connects to it. When you steer, brake, or accelerate, the forces travel through the tyres and wheels into the suspension and into the subframe. It is not a peripheral component — it is load-bearing structure.
      This matters because subframe quality directly affects three things most drivers care deeply about: alignment stability, handling feel, and long-term reliability. A subframe that doesn't hold its geometry under load — or that holds it differently from the OEM unit — produces alignment drift, steering wander, and tyre wear that no alignment shop can permanently correct, because the underlying structure is wrong.
      The Aftermarket Subframe Problem
      Aftermarket subframes exist primarily for the collision repair market, where insurance companies pressure shops to use lower-cost alternatives to OEM. They are manufactured to be "close enough" — the mounting points are approximately in the right locations, the bolt patterns are approximately correct, and the overall shape is approximately right. In practice, this creates several specific problems.
      1. Dimensional Tolerance Differences
      OEM subframes are manufactured to tolerances measured in tenths of a millimetre. Suspension geometry — caster, camber, and toe — depends on mounting point locations being accurate to within fractions of a degree. Aftermarket subframes are typically manufactured to tolerances of 1–3mm, which sounds small but translates to measurable geometry deviation at the wheel. The result is a vehicle that drifts, wears tyres unevenly, and requires constant alignment correction.
      2. Steel Grade and Wall Thickness
      OEM subframes use high-strength steel alloys — often dual-phase or TRIP steels — with precisely engineered wall thicknesses optimised for both strength and weight. Aftermarket subframes typically use lower-grade mild steel at higher wall thickness to compensate, resulting in a heavier unit that doesn't deform in the same way during a collision. In modern vehicles designed with specific crumple zones and energy absorption paths, this matters for safety.
      3. Corrosion Protection
      Toyota applies its electrodeposition coating to subframes before assembly — the same coating used on the body. Honda uses a similar process. These factory corrosion protections are difficult or impossible to replicate in aftermarket manufacturing. The result is that aftermarket subframes frequently begin surface corrosion within 2–3 years in northern climates, while OEM units from comparable donor vehicles may show minimal surface oxidation after 10+ years.
      4. Mounting Bracket and Weld Quality
      Every bracket on an OEM subframe — engine mount brackets, steering rack mounts, sway bar tabs — is welded under controlled factory conditions with consistent penetration and quality verification. Aftermarket subframe brackets are frequently thinner, attached with fewer welds, and at slightly different positions, causing looseness, vibration, and eventual cracking at the weld points under road loads.
      OEM vs. Aftermarket vs. Used OEM — The Real Comparison
      Factor New OEM Aftermarket Used OEM (GreenGears) Dimensional accuracy ✅ Factory spec ⚠️ Approximate ✅ Factory spec Steel grade ✅ OEM alloy ⚠️ Lower grade ✅ OEM alloy Corrosion protection ✅ Factory coating ❌ Basic primer ✅ Original coating Weld quality ✅ Factory certified ⚠️ Variable ✅ Original factory welds Alignment result ✅ Holds spec ⚠️ Often drifts ✅ Holds spec Typical cost $700–$2,400+ $80–$280 $160–$680 Warranty (GreenGears) Dealer warranty Variable/limited 90 Days The cost gap between aftermarket and used OEM is real — but it's narrower than it appears once you factor in alignment costs ($80–$150 every time the aftermarket unit shifts), repeat repairs when the bracket welds crack, and the labour cost of doing the job twice.
      Real-World Consequences of Aftermarket Subframes
      "My alignment keeps going out"
      This is the most common complaint after an aftermarket subframe installation. The owner gets an alignment after the repair, drives for 3,000 miles, and the steering starts pulling again. They go back for another alignment — same result. The problem isn't the alignment; it's that the aftermarket subframe's mounting point tolerances allow the suspension geometry to shift under load in ways that an OEM unit doesn't. The only fix is replacing the aftermarket subframe with an OEM unit.
      Vibration through the steering wheel
      Aftermarket subframe mounting bushings are frequently a different durometer (hardness) than OEM, and bracket attachment points that are 1–2mm off cause the steering rack to transmit road vibration differently. The result is a steering feel that's subtly but noticeably different from stock — often described as "rough" or "numb" where the original was precise.
      Premature tyre wear
      Toe deviation of even 0.2 degrees — well within the tolerance range of a typical aftermarket subframe — causes measurable inner or outer tyre wear within 15,000 miles. On a vehicle where the alignment appears correct but the subframe geometry is slightly off, the tyres wear in a pattern that no amount of adjustment can prevent because the root cause isn't the alignment — it's the structure the alignment is measured against.
      When Aftermarket Is Acceptable — and When It Isn't
      To be fair: not all aftermarket subframes are equally poor, and not all applications carry equal risk.
      Lower risk: older vehicles, off-road applications, track builds
      For a vehicle being rebuilt for off-road use, a track car that will run non-OEM alignment settings anyway, or an older vehicle where OEM subframes are genuinely unavailable, aftermarket can be a practical choice. The geometry standards that matter for a daily-driven Accord matter less for a Jeep with a lift kit and custom suspension.
      Higher risk: daily drivers, vehicles with ADAS, AWD platforms
      For a daily-driven vehicle — particularly one with lane-keeping assist, automatic emergency braking, or other ADAS systems that depend on precise suspension geometry — aftermarket subframes introduce meaningful risk. ADAS calibration assumes OEM geometry. An aftermarket subframe that's 1.5mm off in a suspension mounting point can cause persistent ADAS warnings that can't be resolved through calibration alone. AWD vehicles are even more sensitive — subframe geometry affects driveshaft angle and AWD balance on platforms like the Honda CR-V and Toyota RAV4.
      ⚠️ Aftermarket Subframes and Insurance Repairs If your vehicle is repaired after a collision through insurance and an aftermarket subframe is used without your explicit consent, you may have grounds to request OEM replacement. Many states have laws requiring insurers to disclose when non-OEM parts are used. A used OEM subframe costs only moderately more than a typical aftermarket unit — it's worth requesting it specifically. Why Used OEM Works for Subframes Specifically
      Subframes are an ideal used OEM purchase for a specific reason: they are among the most durable components on any vehicle. A subframe from a 55,000-mile accident-damaged Toyota Camry has experienced exactly 55,000 miles of normal road load — the same load it was designed to handle for 150,000+ miles. There is no internal wear, no fluid degradation, no moving parts. It is a piece of formed and welded steel that is either dimensionally intact or it isn't.
      At GreenGears Auto, every subframe is inspected for:
      Bending or twisting from impact — a bent subframe from collision damage is rejected regardless of mileage Crack propagation at weld points — stress cracks near mounting brackets disqualify a unit Mounting point thread integrity — stripped or cross-threaded bolt holes are a disqualifier Corrosion depth — surface oxidation is noted; through-rust is a disqualifier Bracket completeness — missing or damaged auxiliary brackets are documented before listing ✅ The Used OEM Subframe Advantage in Practice A used OEM Honda Accord front subframe from GreenGears Auto costs $180–$360. A new OEM dealer unit costs $700–$1,400. An aftermarket unit costs $80–$160. The used OEM unit is the factory unit — same steel, same welds, same geometry — at the same price point as a quality aftermarket alternative. The choice becomes straightforward. Most Popular Used OEM Subframes in Our Inventory
      Our
      link hidden, please login to view covers front and rear subframes and engine cradles for domestic and import vehicles. Top platforms include Honda Accord and CR-V, Toyota Camry and RAV4, Nissan Armada, Ford Fusion and Escape, Chevrolet Equinox, and VW MQB platform vehicles. All carry a 90-day warranty from confirmed delivery. If your specific vehicle isn't listed,
      link hidden, please login to view — we can search our salvage yard network for your application and confirm availability before anything ships. Shop Used OEM Subframes — Factory Fit, 90-Day Warranty
      Free US shipping on every order. VIN fitment confirmed before dispatch.
      Use code below for an extra 10% off:
      GGA10 📧 [email protected]  |  📞 +1 (315) 305-4300
      GreenGears Auto — Drive Green. Drive Smart.
      🛡️ 90-Day Warranty  ·  🚚 Free US Shipping  ·  ↩️ 15-Day Returns

      link hidden, please login to view
    • By elizabeth
      Are you looking for a powerful and reliable Chevy Silverado at an affordable price? We offer an outstanding selection of Chevy Silverado trucks built for hard work, adventure, and everyday driving excellence. Each Chevy Silverado in our inventory is carefully inspected for performance, safety, and reliability, ensuring you get a truck that meets your highest expectations. Available in multiple trim levels, cab configurations, and engine options, we have the perfect Silverado to match your lifestyle and budget. Our dedicated team provides expert guidance, easy financing solutions, and exceptional customer support from start to finish. Whether you need a workhorse or a weekend warrior, shop our trusted Chevy Silverado inventory today and find your perfect truck!

      link hidden, please login to view
    • By OReilly Auto Parts
      How To Choose the Best Windshield Wiper Blades
    • By liangyanyang
      When maintaining heavy-duty trucks and diesel engines, choosing the right filter is crucial for engine performance and operating costs. Many fleet owners and dealers typically compare original equipment manufacturer (OEM) truck filters with aftermarket truck filters before making a purchase.
      So, what's the difference between original equipment manufacturer (OEM) filters and aftermarket filters?
      What is an original equipment truck filter?
      Original equipment (OEM) filters are manufactured to the specifications of the original vehicle or engine manufacturer. These filters are designed to meet the requirements of the original equipment system in terms of filtration efficiency, airflow, and durability.
      Original equipment manufacturer (OEM) filters are typically used for:
      Heavy trucks Commercial vehicles construction machinery diesel engine The advantages of original equipment manufacturer (OEM) filters include:
      Stable quality Reliable compatibility Stable performance Longer engine protection time What are aftermarket truck filters?
      Aftermarket filters are replacement products manufactured by independent filter manufacturers. High-quality aftermarket truck filters offer similar performance to original equipment manufacturer (OEM) products at a more competitive price.
      Professional aftermarket filter manufacturers typically offer:
      Original replacement filter Custom Brands Provide bulk supply to distributors Flexible production solutions Original equipment manufacturer (OEM) filters vs. aftermarket filters: key differences
      feature Original filter Aftermarket Filters compatibility Fully compliant with original factory standards Depends on the manufacturer price higher More cost-effective Brand promotion Original brand Custom/OEM branding services are available. Supply flexibility Limited Flexible Bulk Production custom made low High How to choose a suitable truck filter supplier
      Whether choosing original equipment manufacturer (OEM) filters or aftermarket filters, the quality of the supplier is the most important factor.
      A reliable truck filter manufacturer should provide:
      Stable filtration performance High-quality materials OEM Replacement Support Strict quality control Rapid delivery capability Why do many dealers choose aftermarket filters?
      Today, many global dealers prefer aftermarket truck filters because they offer the following advantages:
      Higher profit margins Original factory quality and performance Flexible Packaging Solutions Reduce procurement costs High-quality aftermarket filters can effectively protect diesel engines while reducing maintenance costs.
      in conclusion
      Original equipment (OEM) and aftermarket truck filters each have their advantages. The key is to choose a trustworthy filter manufacturer that ensures reliable quality and long-term supply support.
      If you are looking for OEM replacement filters, custom filter solutions, or bulk truck filter supplies, partnering with an experienced manufacturer can help your business grow faster.
      website:www.ixinfilter.com
    • Government UFO Files
    • By elizabeth
      Don't miss this incredible deal on a 2012 Toyota Camry transmission — quality you can trust at the best price available. The Camry is one of the most reliable midsize sedans ever built, and keeping it running smoothly starts with a dependable transmission. Compatible with the 2.5L four-cylinder and 3.5L V6 engine options, this unit supports smooth, precise shifting for both city and highway driving. Each transmission is inspected and tested to ensure it meets the high standards Camry owners expect. Whether you're dealing with slipping gears, hard shifting, or complete transmission failure, this replacement offers an affordable path back to peak performance. Don't overpay at the dealership — get the best price on a trusted Camry transmission today!

      link hidden, please login to view

×
  • Create New...