Jump to content

Recommended Posts

Posted

Vehicle recalls are critical to the safety of our customers, our families and our delivery drivers each time they get behind the wheel. When the National Highway Traffic Safety Administration (NHTSA) or a vehicle manufacturer determines that a safety risk is present in a vehicle, a recall is issued, alerting vehicle owners to the potential danger. From there, it’s up to the manufacturer to come up with a solution to the problem, and to make that solution available to vehicle owners free of charge.

Recalls cover a wide range of faults, and some are more obvious than others. One of the most well-known and wide-reaching modern safety recalls is the current Takata airbag recall, affecting more than 67 million vehicles in North America. Defective airbag inflators in Takata-equipped vehicles can cause injury or death when they explode during deployment. Other recalls have become the stuff of legend, like the Ford Pinto’s “exploding” gas tank in the 1970s, or the Toyota Camry and Mazda 6 models that were infested with spiders in the 2010s … yes, SPIDERS!

Whatever the cause, once a safety issue is identified, it’s quickly made public to the consumer. Even if the manufacturer doesn’t have a remedy yet, registered owners are notified that a problem potentially exists in their vehicle. This interim notice gives the consumer a prompt heads-up that a problem has been identified, explains the nature of the recall, and reassures them that they will be notified when a solution is available. In the meantime, manufacturers may issue warnings not to operate the vehicle, or to carry passengers, if the defect is severe. Some manufacturers involved in the Takata recall have issued warnings to their customers advising them not to drive the vehicle until recalls have been completed.

Recalls can affect a vehicle at any time in its lifecycle, but for new vehicles, recalls must be completed before the initial retail sale. For vehicles with critical recalls, the manufacturer also may issue a “STOP SALE” directive, in which affected vehicles on dealership lots are not sold until the recall repair is performed. There is no federal law governing the sale of “open recall” USED cars, but most states have statutes against car dealers offering these vehicles for sale. Private sales are not restricted.

Manufacturers work closely with NHTSA and state motor vehicle departments to identify and contact owners of affected vehicles. In New York, our annual safety and emissions inspection certificate includes a notification of any open recalls found for the VIN being inspected. The open recalls don’t affect the outcome of the inspection, but it’s a convenient way of notifying owners of their safety status.

When a recall remedy is available, the consumer can arrange with their local dealership to have the repair performed free of charge. In some instances, if a consumer has previously paid to have a repair performed, and that condition later becomes a recall, the manufacturer may reimburse the cost of the prior repair. Sounds like yet another good reason for our customers to hold on to their receipts!

While vehicle recalls don’t really affect the aftermarket, product recalls of consumer goods are a common occurrence. Tires, fire extinguishers and child safety seats are all categories that have been subject to recalls in recent years. Aftermarket manufacturers also may determine that a batch of their product does not meet their minimum standards, or a design or manufacturing defect poses a possible safety risk. In these cases, the manufacturer will issue a bulletin “recalling” certain part numbers or production runs of their product. Additionally, some aftermarket parts like tires and wheels, brake hoses, mirrors and lighting are required to conform to Federal Motor Vehicle Safety Standards, as issued by NHTSA. When these products are identified, the affected merchandise usually is returned for credit to your DC, and then sent back to the manufacturer for analysis and/or disposal.

Recalls sometimes can be difficult for the general public to understand. We all give our fair share of advice over the counter, but we are NOT lawyers, and this article does not constitute legal advice. If your customers want more information about a vehicle recall, or to check the recall status of their vehicle, they can access the manufacturer’s website, or reach out to NHTSA at

link hidden, please login to view
with their VIN. NHTSA also has Safercar mobile apps available for iPhone and Android users.

The post

link hidden, please login to view
appeared first on
link hidden, please login to view
.

link hidden, please login to view

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Counterman
      link hidden, please login to view and link hidden, please login to view are gearing up for another season of excitement with the launch of the 2026 Perfect Stop® Powersports Summer Sweepstakes, kicking off this June and running through the end of July. This exclusive MyPlace4Parts promotion gives professional technicians opportunities to win big all summer long with every qualifying Perfect Stop® purchase. Throughout the promotion period, technicians will earn automatic entries with every qualifying purchase of Perfect Stop® products placed through MyPlace4Parts, including brake pads, rotors, calipers, sensors, shoes, brake cleaner, and brake fluid. Participants will have the chance to be one of six Grand Prize winners, each of whom will get to select a powersports vehicle of their choice. In addition, a total of $25,000 in gift cards will be awarded to 150 lucky winners, keeping the momentum going all summer long.
      “Perfect Stop® is more than just individual components—it’s a complete brake job lineup built to deliver confidence from start to finish,” said Justin Hebert, vice president of category management for the
      link hidden, please login to view “From pads and rotors to calipers, fluids, and even sensors, it’s a full-system solution that allows shops to perform complete, reliable, OEM-quality brake service every time. When technicians choose Perfect Stop®, they’re picking perfect—every time.” Built for reliability, coverage, and performance, the Perfect Stop® product line supports light, medium, and heavy-duty applications, giving professional technicians a trusted solution for comprehensive brake jobs across a wide range of vehicles. Like previous years, this promotion will run exclusively on MyPlace4Parts, the industry’s most robust B2B eCommerce solution designed specifically for professional service and repair shops.
      “Combining the strength of the Perfect Stop® brand with the speed and simplicity of MyPlace4Parts makes this promotion especially impactful for professional shops,” added Hebert. “It’s about delivering a complete brake solution backed by a seamless ordering experience that helps technicians save time, stay focused on the job, and continue to service their customers with confidence.”
      Professional technicians, don’t miss your chance to win big while stocking up on a complete brake solution built for performance and reliability. Get your entries in by the end of July and make this summer a Perfect Stop® summer.
      For full promotion details and official rules, visit
      link hidden, please login to view. The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view
    • By GreenGears Auto Limited
      Published by GreenGears Auto  |  6 min read  |  Steering Parts Buying Guide
      A whining or groaning noise when you turn the wheel — especially at low speed or when parking — is the classic sign of a failing power steering pump. Left unaddressed, it leads to stiff, heavy steering and eventually complete loss of power assist. New OEM replacements cost $180–$600 before labour. A quality used OEM pump from a low-mileage donor vehicle delivers identical factory performance at 50–60% less. This guide covers exactly how to diagnose the problem, what to check in a used pump, and which platforms give you the best value. What Does a Power Steering Pump Do?
      The power steering pump is a belt-driven hydraulic pump that pressurises power steering fluid and delivers it to the rack and pinion or steering gearbox, providing the assist that makes low-speed steering feel light and effortless. Without it, steering becomes noticeably heavier — technically still functional, but significantly more effort, especially when manoeuvring at low speeds or parking.
      Power steering pumps are found on vehicles with hydraulic power steering (HPS) systems — typically those built before 2013, and many trucks and SUVs through to the present day. Vehicles with electric power steering (EPS) have no pump at all, using a motor integrated into the steering column or rack instead. If your vehicle has EPS, a power steering pump is not the component you need — check the rack, column motor, or steering control module.
      Symptoms of a Failing Power Steering Pump
      Whining or groaning noise when turning: The most common symptom. The noise is usually loudest at full steering lock — when parking or making tight turns — and may fade at highway speed when steering input is minimal. Stiff or heavy steering at low speeds: Reduced assist makes the wheel feel heavy, particularly during slow manoeuvres. If it comes and goes, low fluid level is often the cause before the pump itself fails completely. Steering fluid leak: A reddish-brown puddle under the front of the vehicle near the engine. Pump seal failure is a common source — and once a pump starts leaking externally, the internal pressure loss accelerates internal wear rapidly. Foamy or discoloured fluid in the reservoir: Foamy fluid indicates air contamination from a leak or failing reservoir cap. Dark brown or black fluid indicates oxidation and contamination — both accelerate pump wear and should be addressed immediately. Momentary loss of assist on cold starts: The pump works normally once warm but feels stiff for the first few minutes after a cold start. This is a classic sign of a pump with worn internal seals that haven't yet failed completely. ⚠️ Check the Fluid Level and Condition Before Replacing the Pump Low power steering fluid is the single most common cause of whining and stiff steering — and it costs nothing to check. Top up with the correct OEM-spec fluid and see if symptoms resolve before ordering parts. If the reservoir empties repeatedly, you have a leak somewhere in the system — identify the source before replacing the pump, or the new pump will fail for the same reason. Most Reliable OEM Power Steering Pump Platforms
      Toyota and Lexus — Best Overall Longevity
      Toyota's belt-driven hydraulic power steering pumps are among the most durable available. Camry, 4Runner, Tacoma, and Tundra pumps routinely reach 150,000–180,000 miles without failure when the correct fluid is used and the reservoir is kept clean. Lexus GX and LX V8 pumps are particularly robust. Used OEM Toyota pumps from low-mileage donors are the highest-value option in this category — and given Toyota's large US fleet, availability is excellent.
      Honda and Acura — Reliable, High Availability
      Honda's HPS pumps on Accord, CR-V, Pilot, and Odyssey are reliable and well-represented in the used market. The main failure mode is gradual seal wear causing slow fluid loss — pumps that show no external seepage and come from documented low-mileage donors have excellent remaining service life. Acura MDX and TL V6 pumps are slightly more complex but equally durable when fluid is maintained.
      Ford — Trucks Strong, Some Car Platforms Less So
      Ford's truck and SUV power steering pumps — F-150, Explorer, Expedition — are heavy-duty and long-lived. The Ford Focus and older Fusion HPS pumps have a shorter typical service life due to a smaller internal design, but used OEM units from low-mileage donors still represent strong value at used pricing. Always use Ford-spec Mercon power steering fluid on Ford applications — substituting generic fluid degrades internal seals faster on these platforms.
      GM — Good Availability, Fluid Specification Critical
      GM's Malibu, Impala, Silverado, and Tahoe HPS pumps are well-built and widely available used. The most common failure on GM pumps is contamination-related — using incorrect fluid or neglecting fluid changes causes internal scoring on the pump housing. Used OEM units from low-mileage accident-damaged donors with clean fluid history are consistently reliable.
      Dodge / Chrysler / Jeep — Durable Truck Units, Watch for Wear on High-Mileage Cars
      Jeep Grand Cherokee and Wrangler HPS pumps are heavy-duty and durable, well-suited to the off-road loads these vehicles encounter. Dodge Ram and Durango pumps are similarly robust. Chrysler car platform pumps (300, Charger, Challenger) are adequate but more susceptible to wear on higher-mileage examples — source from donors under 70,000 miles where possible.
      Used OEM vs. Remanufactured Power Steering Pump
      Option Typical Cost Core Charge Quality Notes GreenGears Used OEM $60–$220 None Factory assembly, mileage-documented, inspected for seal integrity and shaft play. 15-day warranty. Remanufactured $90–$280 $40–$120 Internal wear on pump housing may not be addressed in rebuild. Quality varies significantly by rebuilder. New OEM Dealer $180–$600+ None Highest quality. Rarely justified when a clean used OEM unit is available at 50–60% less. Budget Aftermarket $35–$120 None High noise rate on installation. Shorter service life. Seals often incompatible with OEM fluid spec. Budget aftermarket power steering pumps have a particularly poor track record — whining immediately after installation, premature seal failure, and noise that returns within 20,000 miles are common complaints. The issue is that aftermarket pump housings are often cast to lower tolerances than OEM, creating internal clearances that cause noise and accelerate wear from day one. A used OEM pump from a 55,000-mile donor has already proven its ability to run quietly and leak-free for real-world service. That is a track record no budget aftermarket unit can match.
      What to Check Before Buying Any Used Power Steering Pump
      Confirm the application — power steering pumps are engine-specific on many platforms, not just make and model. A 2.4L and 3.5L version of the same vehicle often use different pumps. Inspect the pulley — it should spin freely with no roughness, binding, or wobble. Bearing wear shows up as roughness when the pulley is rotated by hand. Check the shaft seal area for any dried fluid residue — a weeping shaft seal indicates the pump has been running low on fluid or has internal seal wear. Verify the inlet and outlet fittings are undamaged and thread-clean — stripped or cross-threaded fittings are a common problem on pulled-from-yard units. Ask for documented donor mileage — a pump from a 45,000-mile donor has a fundamentally longer remaining service life than one from an unknown-mileage vehicle. When installing, always flush the power steering system before connecting the new pump — contaminated fluid from the old failed pump will shorten the life of the replacement immediately. Use only the OEM-specified fluid for your vehicle — Toyota PSF, Honda PSF-S, Ford Mercon, GM Power Steering Fluid — never generic ATF as a substitute. 🔧 Always Flush the System on Pump Replacement When a power steering pump fails internally, it sends metal debris through the entire hydraulic circuit — contaminating the reservoir, hoses, and rack. Installing a clean used OEM pump into a contaminated system dramatically shortens its life. Flush the system with fresh OEM-spec fluid before connecting the new pump, and replace the reservoir filter if accessible. How to Order a Used OEM Power Steering Pump From GreenGears Auto
      1 Browse or Contact Us With Your Engine Size
      Search our
      link hidden, please login to view or link hidden, please login to view with your year, make, model, and engine size. Many platforms have engine-specific variants — providing the engine code ensures the right unit ships first time. 2 Fitment and Condition Verified Before Dispatch
      We check pulley condition, shaft seal integrity, fitting thread condition, and donor mileage on every pump before it leaves our facility. No units with evidence of seal weeping or bearing wear are listed or shipped.
      3 Free Shipping, 15-Day Warranty
      All orders ship free within the US. Processing 1–3 business days, transit 3–7 business days after dispatch. Power steering pumps carry a 15-day warranty from confirmed delivery. Use code GGA10 at checkout for an extra 10% off your entire order.
      Find a Used OEM Power Steering Pump for Your Vehicle
      Tell us your year, make, model, and engine size — we'll confirm the right unit and check current stock. Free US shipping on every order.
      Use code below for an extra 10% off:
      GGA10 📧 [email protected]  |  📞 +1 (315) 305-4300
      GreenGears Auto — Drive Green. Drive Smart.
      🛡️ 15-Day Warranty  ·  🚚 Free US Shipping  ·  ↩️ 15-Day Returns  ·  📋 Mileage Verified
    • Government UFO Files

×
  • Create New...