-
Welcome to Auto Parts Forum
Whether you are a veteran automotive parts guru or just someone looking for some quick auto parts advice, register today and start a new topic in our forum. Registration is free and you can even sign up with social network platforms such as Facebook, X, and LinkedIn.
PRT Launches 95 New Complete Strut Assemblies
-
Similar Topics
-
By OReilly Auto Parts
Automotive Shock and Strut Overview | What do they do and why are they important?
-
By Counterman
Over the past couple of months, MEMA has been building on momentum to try and get the REPAIR Act passed the organization said. Now, it’s announcing the next step in a campaign called the “At Home REPAIR Campaign,” asking aftermarket suppliers to get involved.
“Members of Congress will be back at home frequently in April, May, June, and July. These recesses provide the perfect opportunities to meet with legislators and urge them, face-to-face, to pass the REPAIR Act in 2024,” MEMA said.
MEMA’s goal: Suppliers schedule in-person legislator meetings and facility visits during these recesses to advance the REPAIR Act.
This is after MEMA Aftermarket Suppliers completed their Washington D.C. fly-in to try and build momentum behind the REPAIR Act, also known as H.R. 906.
The post
link hidden, please login to view appeared first on link hidden, please login to view.
link hidden, please login to view -
By NAPA
As he celebrated 30 years as a professional drag racer, Funny Car superstar Ron Capps was looking forward to a long race day on Sunday at the NHRA Arizona Nationals at Firebird Motorsports Park. The three-time world champion entered eliminations in the No. 11 position on the ladder but made an early exit against Blake Alexander in the first round of competition.
Aboard his brand-new link hidden, please login to view Toyota GR Supra, Capps battled to gain a favorable spot on the ladder among a stacked Funny Car field. Typically, teams at this elite level within the sport will go through several test sessions with a new car before throwing it into the intensity of NHRA Mission Foods Drag Racing Series competition, so Capps, crew chief Dean ‘Guido’ Antonelli, and the Ron Capps Motorsports team knew that they would experience some trial and error. His first qualifying effort went up in a puff of smoke, but his second attempt showed more promise as he powered to the finish line with a run of 4.020 seconds at 310.34 MPH. A loss of traction in the third qualifying round forced Capps to shut off early, marking the first time in 20 events for him to begin eliminations from the bottom half of the field.
“Building into the race we had the excitement of the 30 years. Having fans come up throughout the weekend and saying, ‘Happy Anniversary’ and things like that, it was fun,” began Capps as he recalled his weekend. “I always try to keep our NAPA fans updated as much as we can about what goes on with our team. We brought out a new chassis. It’s something we built in the off-season. Rather than testing first, we decided to do it in race conditions and that’s hard to do. But it reminds me a lot of our NAPA Auto Care people because I love this process of trying to take something and be the best with something so new. It’s like pulling your car into an AutoCare Center, you have a dash light blinking and technicians can attack that problem, and they don’t just snap their fingers and fix it. It’s a process, especially with today’s cars, as they try to figure out what the problem is. I love watching my NAPA Auto Care guys do the same thing. The car didn’t go down the track in the first run and to watch how many hours they put in trying to figure things out, it was really impressive.”
As Capps lined up against No. 6 qualifier Alexander, hopes were high as he has defeated Alexander seven out of the eight times they’ve faced each other in the first round of eliminations. Despite getting the starting line advantage, Capps ultimately came up short. Both cars lost traction early in the race resulting in a bit of a pedal fest to the stripe, but Alexander was able to get there first.
“There’s an upside and a downside to bringing a new chassis out at a race. It’s a gutsy move. But a couple of races down the road, I know that we are going to be much better because of it. And that’s also part of me having the utmost confidence in Guido and our NAPA Auto Care team. We didn’t qualify in the top half of the field, so we didn’t have lane choice. As we sat in the staging lanes, seeing dragsters winning only in the left lane made me pretty nervous and sure enough we got put in the right lane. That’s part of not qualifying in the top half. We still felt like we could beat them and that’s the confidence we had going up there. But it just wouldn’t hold, and we lost traction. I feel like I could have done a better job pedaling it. I should win those races, but we didn’t. But I feel like we’re going to have a great car for Vegas.”
Capps is currently fifth in the NHRA Mission Foods Drag Racing Series points as he heads to the next stop on the tour, the NHRA Four-Wide Nationals at The Strip at Las Vegas Motor Speedway, April 12-14, where he is a six time winner at the facility.
Start / Finish: No. 11 / def. in first round
Points Standing / Total: No. 5 / 170 pts.
Next Race: April 12 – 14, Las Vegas, NHRA Four-Wide Nationals
How to Watch or Listen: FS1,
link hidden, please login to view NAPA Racing:
link hidden, please login to viewRon Capps: link hidden, please login to view
Ron Capps Motorsports: link hidden, please login to view The post
link hidden, please login to view appeared first on link hidden, please login to view.
link hidden, please login to view -
By Counterman
link hidden, please login to view
link hidden, please login to view announced the launch of its 65th-anniversary fundraising initiative. Running through July 1, 2024, the campaign aims to raise $65,000 through 1,000 donations of $65 each. This impactful effort highlights the industry’s commitment to taking care of its own, the AACF said. From sudden illness and death to natural disasters, the foundation has provided assistance to industry professionals and their families during their darkest hours. As AACF celebrates its 65th year of service, it remains steadfast in its mission to provide financial support and resources to those in the automotive aftermarket industry in need, the organization said.
In honor of this milestone, AACF is calling upon automotive aftermarket industry professionals, as well as compassionate individuals eager to lend a helping hand, to join forces in raising $65,000. By
link hidden, please login to view, supporters can contribute to a fund that offer vital assistance during a time of greatest need. “Over the past 65 years, AACF has remained unwavering in its commitment to supporting members of the automotive aftermarket community during their most challenging moments,” said Joel Ayres, AACF executive director. “As we embark on this historic fundraising initiative, we are inspired by the generosity and compassion of our supporters. Together, we can make a profound difference in the lives of those facing adversity, demonstrating the industry’s unwavering dedication to taking care of its own.”
The post
link hidden, please login to view appeared first on link hidden, please login to view.
link hidden, please login to view 
-
By Counterman
Ask anyone what a “complete” brake job is and you’re likely to get a variety of answers. In the context of professional automotive repair, I define complete as meaning correctly done.
Why? Because the actual work that needs done to any given vehicle can vary depending on vehicle mileage, age and condition. And it can vary based on the equipment. For example, do you have access to a brake lathe? As a counter professional, you’ll have to dig into the details with your customer to determine what they need. However, there are simple guidelines to follow that will ensure you’re advising a “complete” brake job every time.
Brake Fluid, Brake Fluid, Brake Fluid
Above all, clean brake fluid is my first requirement.
It’s probably one of the most overlooked vehicle services, and most people don’t think of it as part of a brake job. It’s an afterthought only considered if they’re forced to do it. Anytime I perform brake work, the first part of the inspection is the bleeder screws. They must be able to open. No brake job is complete without flushing the brake fluid.
There’s no need to get “crazy” with it either when it’s done on a regular basis. A couple small 12-ounce bottles are plenty. Use a clean suction-bulb to remove as much brake fluid as you can from the master-cylinder reservoir, refill it, then flush fluid through until you can fit the contents of both bottles into the reservoir. Start with five strokes at each wheel until you see how much fluid is being forced through, so you equally balance the flushing from front to rear.
Contaminated brake fluid is corrosive and damaging to all the internal brake-system components, and it can cause poor braking performance. Even though every manufacturer specifies to flush it on a regular basis, it’s still out-of-sight, out-of-mind for a lot of people. In my opinion, you can’t change the brake fluid too often.
A complete brake job not only includes fluid, but also calipers or wheel cylinders in any situation where the bleeders don’t open.
Pads and Rotors
When disc brakes are being serviced, pads and rotors are at the core of the job. It’s far less common to resurface rotors than it has been in past times, and it doesn’t matter if you take that road or go with new. But the bottom line is something must happen with the rotors. “Slapping” a set of pads on old rotors is an immediate fail. The pads will never bed in properly, and you’ll only be faced with poor brake performance, uneven pad wear and unwanted noise.
The bottom line: Rotors must be resurfaced or replaced for the job to be complete. By the same token, old pads on new rotors equals an incomplete brake job.
Why would someone do this? Your guess could be as good as mine, but believe me, I’ve seen it all and I’m sure you have too. New pads and rotors bed in together. In other words, they rely on each other for proper brake operation.
Drum Brakes
If you thought there were some offenders with disc brakes, drums are often worse. For some reason there seems to be a perception that brake drums miraculously never need service, but the same theories hold true. If you’re replacing brake shoes, the job is only correctly done by resurfacing or replacing the drums.
Hardware
Hardware is anything from springs and hold-downs on drum brakes to anti-rattle clips and slide-pin boots on disc brakes. All these little pieces are important to proper brake operation. On drum brakes, even though everything may be intact, it’s also old and the springs will simply be fatigued. On disc brakes, the same holds true and even anti-rattle clips that look OK can be worn or fatigued in some manner. Luckily, most pads come with the hardware. They don’t put it in the box just for fun.
One of the most overlooked parts of disc-brake service is the fact that the pads must be able to move freely in the caliper bracket and the calipers also must be able to move freely back and forth. Most calipers (excluding fixed calipers) feature slide pins that allow this to happen. No brake job is complete without removing the slide pins, cleaning them up, lubricating them and reinstalling them with new boots when required.
It’s surprising how often the slide pins are stuck and how often brake pads are jammed in place due to rust, and the rust must be completely removed to allow free movement of the new brake pads. Stuck pins or stuck pads cause uneven and accelerated wear, dragging brakes, pulling and excessive heat buildup.
Lubrication
I touched on it already, but it’s worth a second mention. In addition to the slide pins on calipers, the brake pads require lubrication any place they contact the caliper bracket or caliper. Brake lube is specifically formulated to a) not damage or swell rubber components such as piston or slide-pin boots, b) prevent vibrations that cause noise, c) lubricate the pad contact points so they move freely in the caliper bracket and d) resist washing out.
In the case of drum brakes, the backing plates feature specific contact points for the brake shoes, which should be cleaned and lubricated. Brake shoes also require lubrication at pivot and contact points between the shoes and hardware.
Inspection
Determining what is required for a complete brake job can only be done through inspection and disassembly. It’s easy to see worn-out pads and rusty rotors through a wheel, but even when that’s evident, you can’t see anything else until you take things apart. This is when you inspect for brake-fluid leaks, seized or damaged hardware, torn dust boots and functional bleeder screws.
If leaks are found or dust boots are torn on a caliper piston or wheel cylinder, or if the bleeder won’t open, the components need to be replaced. Only until disassembly is performed during an inspection can you say absolutely what’s needed for any given vehicle. Sure, we can all look at a 50,000-mile four-year-old vehicle and say that it needs pads and rotors, and most likely those are the only hard parts it will need. But it’s no guarantee, and the higher the mileage and older the vehicle, the more likely we’ll find something else, which leads to the next category …
Recommending Parts
There’s always a way to work into the conversation of a complete brake job. The next time someone comes in and wants pads and rotors, you might ask, “Would you like me to look up caliper availability just in case a bleeder screw doesn’t open, or a caliper pin is seized?” If they’re an experienced technician, they know how often that happens, and they’ll likely say yes, just to know in case they need them, and they’ll appreciate it!
If they’re new at all this, it will get them thinking and open the door for your advice. The next thing you know, they might change their mind and decide to buy new calipers – or at minimum they’ll leave with the extra goodies they need for a complete brake job, such as brake lubricant, brake fluid, brake cleaner and some shop rags. If they get into the job and realize there’s a problem, they’ll be right back at your store.
The post
link hidden, please login to view appeared first on link hidden, please login to view.
link hidden, please login to view
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.