Jump to content

Recommended Posts

Posted

rssImage-9d8f6cb2a189eefeba6825f7e15cc8e8.jpeg

Air filters are seemingly simple, but unfortunately often neglected until they are so dirty they’ve been unknowingly (to a vehicle owner) affecting performance. Selling them offers benefits to you and your customer. It’s never bad to ask the air filter question and, at minimum, replace them once a year. 

If a customer is skeptical, explain that even as little as 10% blockage of an engine air filter can begin to affect performance. Point out that the effects of a dirty filter were more noticeable on older vehicles, and modern fuel management systems are designed to compensate for reduced air flow. This is good for driveability and emissions, but bad for overall performance. Along with other normal maintenance items, filters are easy for a vehicle owner to overlook.

Be prepared for questions about high-performance filters, because you will get them. Many people ask about high-flow filters, cold air intakes or, on an older car, ditching the original air cleaner for a round, chrome replacement. Don’t be intimidated by performance questions; here’s what you need to know to answer them with confidence.

Filter600x300.jpg

High-Flow Filters

High-flow performance filters are a very common upgrade. They are typically recognized and associated with a color, as opposed to the traditional white paper element. Often pinkish/red, the color is from a dyed oil that is soaked into the element. The elements are typically a cotton weave, held in place by a wire mesh. The weave is looser than a standard paper air filter, allowing a greater volume of air to pass through. Since the loose weave cannot filter out the smaller particles, it is soaked in oil, and the particles will, in turn, stick to the oil. Dye is used in the oil so there is an easily noticeable contrast between the oil and the element, allowing you to ensure that all areas are saturated. Even though red is the most common, there are multiple other colors available.

These types of filters absolutely flow better, and it is often noticeable in engine performance characteristics. But they do require regular cleaning and re-oiling to maintain their level of performance. You can be confident about selling them and touting the increased flow, but I do warn people that when they clean and oil them, be sure to heed the instructions, and don’t over-oil them. There have always been rumors of these types of filters damaging mass airflow sensors, but they are largely unfounded, and over-oiling them is the only thing that could possibly contribute to this.

Factory Air Cleaners

If you have a customer with an old car who wants to install a round chrome air cleaner, you may not be able to change their mind, but there are many facts about the original factory air cleaners that are often overlooked. Many people think they’re an eyesore compared to a shiny new chrome one, but there’s a lot more to them than meets the eye.

The inside of the air cleaner is designed to smoothly direct the air flow up to the top while reducing turbulence, so the air can be smoothly drawn down through the carburetor. They have a snorkel extending off of them to pick up cool air from the side of the engine compartment, and the snorkel also is designed to increase the velocity of the air as it enters the air cleaner.

In addition, the snorkel design incorporates a pickup for warm air to be drawn from around the exhaust manifold up into the air cleaner for improved cold-weather driveability. On the main body of the air cleaner, there is also a filtered pickup for fresh air to enter into the crankcase as part of the positive crankcase ventilation system, so they are important for emissions, too.

This is all theoretically great information, but if someone wants a chrome air cleaner, I get it. They look great, and they are a common characteristic of some old muscle cars. The completely exposed element offers the maximum amount of air flow necessary for the type of performance sought after in these cars.

The minor affect in driveability due to lack of a heat riser and less air velocity at low RPM is not missed on a car with straight line, high RPM performance in mind, and one that is most likely only driven in the summer. I do like to point out that there were a handful of top-dog muscle cars that came originally with chrome open-element air cleaners. On these cars, the crankcase ventilation was routed to the air filter base, and the aftermarket units generally have a stamped breakout in the base and come with a fitting so this can be reconnected. I always encourage them to reconnect these emission-related devices.

If your customer is replacing the air filter on an old vehicle with an OE air cleaner, it’s important to use a high-quality filter and always look it up for the application. You can’t see it when the lid is on, but the filter is designed to seal on the top and bottom so that all air flows through it. If a filter is installed that is even a little bit too short, unfiltered air will be drawn over the top of the filter into the engine, plus mice can fit through just about any small crack, and that carburetor is an awful inviting cubby to store the kibbles `n bits you keep in the garage.

Cold Air Intakes

Aftermarket “Cold Air Intakes” are the rage on newer cars and trucks, and these can offer performance benefits as well in terms of the flow, but there may be a sacrifice in driveability when ditching the original air box on a modern vehicle.

Modern air boxes also have provisions for warm air during cold starts. They have crankcase ventilation connectors, they reduce noise and they are designed to improve air velocity at low engine RPM, just as the original air cleaner on an old vehicle.

Another drawback to cold air intakes is they often drop very low in the engine compartment to pick up air. Most factory air boxes draw from above the radiator core support or from behind one of the front fenders, the point being they draw from high up. It doesn’t matter if a cold air intake picks up down low…that is, until there is a bad rainstorm and deep water. And, since a lowered suspension is popular on new cars, watch out!

The post

link hidden, please login to view
appeared first on
link hidden, please login to view
.

link hidden, please login to view

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By USPartsinc
      OEM vs Aftermarket ECM: Which Engine Control Module Is the Better Choice?
      The Engine Control Module (ECM) is the electronic brain of your vehicle, controlling everything from fuel injection and ignition timing to emissions and engine performance. When an ECM fails, choosing the right replacement becomes one of the most important decisions for maintaining your vehicle's reliability.
      Many drivers find themselves deciding between an OEM ECM and an aftermarket ECM. While both serve the same essential purpose, they differ in manufacturing standards, pricing, compatibility, and overall value.
      This guide from US Parts Inc. explains the key differences to help you select the best option for your vehicle and budget.
      What Is an OEM ECM?
      An Original Equipment Manufacturer (OEM) ECM is built by the same manufacturer that supplied the module for your vehicle when it was first assembled. These units are engineered to match factory specifications and deliver the same performance as the original component.
      Advantages of OEM ECMs
      Factory-level compatibility Precise calibration for your vehicle High manufacturing standards Consistent engine performance Ideal for vehicles under warranty Potential Drawbacks
      Higher purchase price Limited availability for older vehicle models Dealer programming may be required What Is an Aftermarket ECM?
      An aftermarket ECM is produced by a third-party manufacturer and designed to replace the original module. Many modern aftermarket units are thoroughly tested, pre-programmed, and built to meet or exceed OEM performance standards.
      Quality aftermarket ECMs have become increasingly popular because they combine affordability with dependable operation.
      Benefits of Aftermarket ECMs
      Lower replacement cost Broad compatibility across multiple vehicle models Faster availability Many units arrive pre-programmed for installation Excellent option for discontinued OEM parts Things to Consider
      Not every aftermarket manufacturer follows the same quality standards. Choosing a trusted supplier is essential for ensuring long-term reliability.

      Which ECM Offers Better Performance?
      For most daily drivers, a high-quality aftermarket ECM provides performance that is nearly identical to an OEM unit. The biggest factor is purchasing from a reputable supplier that performs comprehensive testing and programming before shipping.
      OEM ECMs remain the preferred choice for vehicles requiring strict factory specifications, while premium aftermarket modules provide exceptional value for many repair situations.
      Factors to Consider Before Buying an ECM
      Before purchasing a replacement Engine Control Module, verify the following information:
      Vehicle Identification Number (VIN) Year, make, and model Engine size Transmission type Part number Emissions configuration Accurate vehicle information helps prevent compatibility issues and ensures smooth installation.
      Common Signs Your ECM Needs Replacement
      A failing ECM can affect nearly every aspect of engine operation. Common warning signs include:
      Persistent Check Engine Light Engine misfires Hard starting or no-start condition Reduced fuel economy Poor acceleration Irregular shifting in automatic transmissions Unexpected engine stalling If these symptoms continue after other repairs, the Engine Control Module should be professionally diagnosed.
      Are Aftermarket ECMs Reliable?
      Modern aftermarket ECMs have advanced significantly in design and quality control. Reputable suppliers test each module for functionality, durability, and compatibility before delivery.
      Many replacement units undergo extensive electronic inspections to ensure dependable communication with your vehicle's sensors and onboard systems.
      Choosing a trusted supplier is far more important than simply selecting OEM or aftermarket.
      How to Choose the Right Replacement ECM
      The best ECM depends on your specific needs.
      Choose an OEM ECM if you:
      Want the original factory component Own a newer vehicle under warranty Prefer manufacturer-approved replacement parts Choose an aftermarket ECM if you:
      Want to reduce repair costs Need a replacement for an older vehicle Prefer faster availability Are looking for a dependable pre-programmed solution Final Thoughts
      When comparing OEM vs aftermarket ECM, there is no one-size-fits-all answer. OEM modules deliver factory-original precision, while high-quality aftermarket ECMs offer excellent reliability, affordability, and convenience for many vehicle owners.
      At US Parts Inc., selecting the right Engine Control Module starts with matching the correct specifications for your vehicle. Whether you're replacing a failed ECM or restoring engine performance, understanding the differences between OEM and aftermarket options helps you make a confident, informed decision.
    • By OReilly Auto Parts
      How to Replace an Engine Air Filter: 2004-2008 Ford F-150 | O’Reilly Auto Parts
    • By Counterman
      WIX Filters announced that the company was honored with the 2025 Parts Warehouse Inc. (PWI) Marketing Support Award at PWI’s annual Red, White and Revved Up conference. The conference took place in April in Rogers, Arkansas, celebrating store wins, providing technical training to attendees and promoting the various vendors that contribute to PWI’s success.
      Marketing Support and Annual Meetings
      Honored over 40 other contenders,
      link hidden, please login to viewwas recognized for its overall engagement and investment in promoting PWI. WIX Filters opened a direct line for sharing assets to support both organizations’ success in 2025. The company developed marketing campaigns that boosted sales and customer awareness and actively participated in PWI’s annual marketing meetings. “PWI is defined by their commitment to providing unparalleled service alongside high-quality auto parts,” said Carmina Lopez, brand manager at WIX Filters. “WIX Filters has been a prominent partner with PWI for over 35 years, and this award recognizes our commitment to developing and enhancing customer relationships while aligning our sales and marketing efforts with PWI.”
      Light- and Heavy-Duty Filters for PWI Customers
      Equipping PWI with both heavy- and light-duty products,
      link hidden, please login to view supplies its customers with oil, cabin and air filters. These filters support both light-duty passenger vehicles and heavy-duty agricultural and construction machinery.
      The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view
    • By elizabeth
      If you are searching for an LFA engine for sale, you are looking for one of the rarest and most technically extraordinary naturally aspirated engines ever placed in a production automobile. The Lexus LFA was produced in a strictly limited run of just 500 units, and its 1LR-GUE 4.8-liter V10 engine is as exceptional as the car itself. This engine produces 552 horsepower, revs to a stratospheric 9,000 RPM, and responds to throttle inputs so instantly that Lexus had to develop a digital tachometer specifically because a conventional analog needle could not keep up with the rate of the engine's acceleration through its rev range.The 1LR-GUE was developed entirely in-house by Toyota and Lexus after an earlier V10 concept was rejected for insufficient refinement. The block and heads use advanced aluminum and titanium construction to minimize weight while maximizing rigidity and thermal performance. Lexus worked with Yamaha's musical instrument division to tune the engine's acoustic character, resulting in an exhaust note that is widely regarded as one of the finest sounds ever produced by a road car engine. This is not simply a powerplant, it is a precision mechanical instrument built to the highest possible standard of automotive engineering.Finding an LFA engine for sale is an extraordinarily rare event given the tiny production numbers of the car itself. Buyers would most likely be LFA owners requiring a replacement after damage or failure, though Toyota has maintained some factory parts support for the model. Should a used 1LR-GUE engine become available on the open market, pricing would likely begin at $50,000 and could exceed $150,000 depending on provenance and condition. Thorough documentation, independent appraisal, and specialist verification are absolutely essential before any transaction involving an engine of this rarity and value is completed.

      link hidden, please login to view  
    • Government UFO Files
    • By Counterman
      link hidden, please login to view was recognized by Hahn Automotive with the 2025 Outstanding Logistics Support Award at the annual Hahn Automotive National Sales Conference. Held last month in Rochester, N.Y., the conference prepares staff for the upcoming spring selling season and honors companies for their support and dedication to Hahn Automotive. WIX Filters Support for Hahn Automotive

      link hidden, please login to view was honored for its service levels and order fill rates last year. The company has partnered with Hahn Automotive for nearly 30 years, providing a full line of filters. “Hahn Automotive stresses that service makes all the difference, emphasizing their commitment to innovation and customer satisfaction,” said David Barraco, trade marketing manager at WIX Filters. “WIX Filters has supported Hahn Automotive and its customers for almost three decades, and this award demonstrates our exemplary drive to provide on-time deliveries of the highest quality filters on the market.”
      Hahn Automotive Warehouses and Auto Parts
      Hahn Automotive owns nine full-service warehouses and 28 pickup warehouses that distribute auto parts throughout the Midwest, New England and the Mid-Atlantic states. The company operates Advantage Auto Stores, Car Parts/Motor Supply, Genuine Auto Parts, Norwood Auto Parts, Nu-Way Auto Parts and Speedway Auto Parts.
      The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view

×
  • Create New...