Jump to content

Need Help Finding the Right Auto Parts? Post Here

BendPak to Debut Eight-Armed Car Lift at NADA Expo

Counterman
 Share

Recommended Posts

Counterman Contributor

Counterman

Posted
Posted

rssImage-f65008f56335757a5d703cc207d82379.jpeg

BendPak recently introduced its patent-pending Octa-Flex concept, a new two-post lift design that features two sets of arms: triple-telescoping swing arms plus all-new integrated lift-assist arms.

Octa-Flex is the world’s first two-post lift series with eight fully adjustable, telescoping lift arms, according to the company.  

The EV12DPS Octa-Flex prototype makes its global premiere in booth 4569W at NADA Expo in Las Vegas, Feb. 2-4.

Octa-Flex offers all the functionality of a traditional two-post lift, while enabling technicians to perform tasks such as tackle cab-off repairs without the help of additional component-handling equipment or a second tech.

While the primary lift arms hold the vehicle, the unique Octa-Flex lift-assist arms can be used to help safely and ergonomically lift and maneuver heavy vehicle components such as EV battery packs, drivetrains, tires and wheel assemblies with precision, ensuring seamless workflow while reducing the risk of workplace injuries, BendPak noted.  

When they’re not needed, the powered lift-assist arms can be moved up out of the way, so the lift can be used as a standard two-post model. 

“Octa-Flex lift-assist arms act like that second set of hands you wish you had when you need to remove a 1,200-pound EV battery or wrestle 100-pound wheels and tires off a truck,” said Jeff Kritzer, BendPak president and CEO. “Now you don’t have to ‘put your back into it’ or grab a buddy. Our Octa-Flex lifts will help technicians get more work done with less physical effort and strain.”

link hidden, please login to view

The three-stage arms extend and retract further than any other thanks to a patent-pending design that enables the inner arm tubes to retract fully through the back of the arm assembly and even beyond the arm pin itself, providing unfettered access to a wide range of vehicle lifting points, according to BendPak.

Their lower profile and dropped-end pad receiver lets them access hard-to-reach lifting points with less chance of damage to vehicle side skirts, running boards or ground effects, even on low-slung sportscars or EVs.

The Octa-Flex concept also features BendPak’s patent-pending Automatic Swing Arm Restraint System (ASARS) to keep the primary lift arms in place.

ASARS provides twice as much holding grip as traditional systems, according to the company. Its 360 degrees of forged steel teeth secure the arms in place to withstand more than 2,000 pounds of side force that can be generated during vehicle service. The adaptive system requires minimal operator involvement to set and release, while providing maximum peace of mind.

A Clear-Floor Design

The Octa-Flex concept is a clear-floor design delivering unobstructed floor space for moving toolboxes, transmission jacks and other equipment under elevated vehicles. It is built to deliver long service life with single-piece columns for strength, ultra-high molecular weight polyethylene load bearings that never need lubrication, super-tall lift carriages to minimize stress on components and industrial-grade hydraulic cylinders, according to the company.

Designed for versatility, Octa-Flex Series lifts feature BendPak’s Bi-Metric reversible swing arms that enable the lift operator to set the lift in either symmetric or asymmetric configurations. 

BendPak said it is committed to further enhancing the Octa-Flex concept in the coming months. Anticipated for fall 2024, the global launch will encompass models with rated capacities of both 10,000 and 12,000 pounds.

Learn more and check out the EV12DPS Octa-Flex prototype at NADA Expo booth 4569W at the Las Vegas Convention Center, Feb. 2-4, visit 

link hidden, please login to view
or call 805-933-9970.

The post

link hidden, please login to view
appeared first on
link hidden, please login to view
.

link hidden, please login to view

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • juliaanderson
      How Often Do You Inspect Your Car Battery?
      By juliaanderson
      Hi everyone,
      I've noticed that many drivers don't think much about their car battery until it suddenly fails to start the vehicle.
      Over the past year, I've started checking the battery terminals, cleaning off any corrosion, and testing the battery before long trips. It only takes a few minutes but can help avoid unexpected breakdowns.
      I'm curious how everyone else handles battery maintenance.
      Do you test your battery on a regular schedule, or do you only replace it when you notice signs like slow engine cranking or electrical issues?
      I'd love to hear what routine has worked best for you and whether you've found any simple maintenance tips that really make a difference.
    • juliaanderson
      How Often Do You Inspect Your Car Battery?
      By juliaanderson
      Hi everyone,
      I've noticed that many drivers don't think much about their car battery until it suddenly fails to start the vehicle.
      Over the past year, I've started checking the battery terminals, cleaning off any corrosion, and testing the battery before long trips. It only takes a few minutes but can help avoid unexpected breakdowns.
      I'm curious how everyone else handles battery maintenance.
      Do you test your battery on a regular schedule, or do you only replace it when you notice signs like slow engine cranking or electrical issues?
      I'd love to hear what routine has worked best for you and whether you've found any simple maintenance tips that really make a difference.
    • abenleulmi
      Stop Doing This! 5 Deadly Sins Killing Your Car's A/C System Every Summer 🛑❄️
      By abenleulmi
      Hey everyone,
      With the summer heat hitting hard, I've seen way too many drivers—both everyday commuters and even some DIYers—making the exact same mistakes under the hood that end up completely wrecking their air conditioning systems.
      Replacing an A/C compressor or a blown blower motor at a US dealership can easily cost you $1,200+ out of pocket. The worst part? Most of this damage is caused by simple, everyday habits we do without even realizing it.
      Here are a few quick, costly traps you need to avoid right now if you want to save your compressor and save some cash at the pump:
      Blasting the A/C on Max at Startup: Doing this the second you turn the key places a massive, sudden parasitic load on a cold engine and slips your serpentine belt. Let your RPMs stabilize first!
      Cruising with Windows Half-Down: This creates a non-stop thermodynamic tug-of-war. Your cabin sensors will force the A/C clutch to stay engaged indefinitely, burning through your gas.
      The Continuous Recirculation Trap: Leaving the recirculation button on for hours traps interior moisture and turns your evaporator core into a literal breeding ground for mold and that foul "gym-sock" smell.
      I’ve put together a completely free, breakdown guide that covers the step-by-step pro mechanic method to cool down a scorching hot car cabin in under 60 seconds without straining your engine. It also includes a breakdown of real-world repair costs if these habits are ignored.
      If you want to keep your ride icy cold and stop burning extra fuel this summer, check out the full guide here: 👉 
      <a href="https://autoskil.com/things-not-to-do-while-cars-ac-is-on" title="Read the full guide on things to avoid while driving" style="color: #1a73e8; font-weight: bold; text-decoration: underline;">5 Things Not to Do While Your Car’s AC is On</a> Would love to hear your thoughts or any under-the-hood hacks you guys use to beat the heat! Stay cool out there.
    • NAPA
      Capps Finishes Runner-Up in Historic 1,000th NHRA Funny Car Race
      By NAPA
      Ron Capps and the
      link hidden, please login to view Funny Car team delivered a standout performance Sunday at the NHRA Winternationals at In-N-Out Burger Pomona Dragstrip, racing to the final round of the milestone 1,000th NHRA Funny Car event before a narrow loss to Matt Hagan. After qualifying No. 2, Capps ran a series of passes in the 3.80-second range, including low E.T. of the event, on the way to his 159th career final round. With the runner-up finish, Capps is now tied for the Funny Car points lead with Hagan following race three of the 20-race NHRA Mission Foods Drag Racing Series season.
      Funny Car’s first qualifying session on Friday was a challenging one for Capps and his fellow competitors, but with Dean ‘Guido’ Antonelli turning the knobs, he charged to a 4.007-second pass at 314.17 mph in the second session. That was the third-quickest performance of the round, rewarding Capps with one championship bonus point and the provisional No. 3 position. By reaching the semifinals at the NHRA Arizona Nationals, which he ultimately won, Capps earned a spot in the Mission #2Fast2Tasty Challenge during Saturday qualifying. Capps left the line first against Paul Lee, but he started to lose traction and backed off the throttle. He then rebounded to a 3.919 E.T. at 330.88 mph in the final session to grab two more bonus points and climb up to the No. 2 position in the final qualifying order.

      In the first round of eliminations on Sunday, Capps left the starting line ahead of young gun Dylan Winefsky, and though he lost traction, pedaled, dropped cylinders, and shut off early, he crossed the finish line first with a 4.977 E.T. Capps came back stronger in the quarterfinals, where he fired off low E.T. of the round, a 3.884-second pass at 332.34 mph, to defeat Alexis DeJoria. Capps and Antonelli lowered the boom yet again in the semifinals with a 3.863 E.T. at 330.31 mph – low E.T. of the event – to hold off rookie Jordan Vandergriff and his 3.889 E.T.

      Following a quick turnaround to race under the lights in the 1,000th NHRA Funny Car final round, Capps lined up next to fellow multi-time world champion Matt Hagan for the 85th time in eliminations. The NAPA Auto Care machine moved off the starting line first, but Hagan pulled ahead at the finish line, with Capps recording a 3.893 E.T. at 334.32 mph to Hagan’s winning 3.876 E.T.

      “You really couldn’t ask for a better final in a lot of different ways,” Capps said. “It was really mano a mano with both teams – ‘Stretch’ (Mike Knudsen, Hagan’s crew chief) and Guido and then Matt and me. I get up for racing Matt. He was a teammate of mine for a long time and I know how good he is. To me, that’s like a ‘Snake’ and ‘Jungle Jim’ race back in the day. You’ve got a great car, you get up there and you throw down, then you add the fact that it’s Pomona on a late Sunday night under the lights and the 1,000th win in Funny Car is on the line. There’s so many cool things about it. I’m bummed it didn’t go our way, but at the same time, we have a good hot rod, and we moved up in points. I’m just so proud of Guido and the guys.”

      Capps will look to solidify the points lead at the next stop on the NHRA Mission Foods Series schedule, the NHRA 4-Wide Nationals, April 24-26, at zMAX Dragway in Concord, North Carolina.
      Start / Finish: No. 2 / def. in final round
      Points Standing / Total: No. 1 / 251 pts. (tied)
      Next Race: April 24-26, NHRA 4-Wide Nationals, Concord, NC
      How to Watch or Listen: FS1, 
      link hidden, please login to view NAPA Racing:
      link hidden, please login to viewRon Capps:  link hidden, please login to view
      Ron Capps Motorsports:  link hidden, please login to view The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view
    • Government UFO Files
    • Autoservice Paulus GmbH
      Do you change anything in your car routine during different seasons?
      By Autoservice Paulus GmbH
      Hi everyone,
      With changing seasons, I was wondering if you adjust anything in your car maintenance routine?
      For example, things like tire checks, AC usage, battery care, etc.
      Do you follow any seasonal habits or just drive as usual?

×
×
  • Create New...