-
Welcome to Auto Parts Forum
Whether you are a veteran automotive parts guru or just someone looking for some quick auto parts advice, register today and start a new topic in our forum. Registration is free and you can even sign up with social network platforms such as Facebook, X, and LinkedIn.
BBB Named One Of The Best Companies To Work For In Alabama
-
Similar Topics
-
By Counterman
Now powered by a higher-capacity rechargeable battery, the
link hidden, please login to view link hidden, please login to view portable LED work light provides up to seven hours of continuous use on one charge. The new LITESTIX LS36SMDX model is designed to train task lighting wherever it’s needed without cords getting in the way. The light boosts visibility where general lighting isn’t strong enough, such as inside engine compartments, vehicle interiors, and underneath lifts, as well as when work is under way at night. Upgrading the rechargeable lithium battery from 1800 mAH (milliampere-hour) to 2600 mAh, means the latest LITESTIX model can deliver another full hour of performance. The work light boasts 36 LED bulbs that together generate 1,200 lumens of bright white light. Each lamp also features high and low brightness settings.
Thanks to its high-efficiency LEDs, LITESTIX uses less energy and stays cool, making it easy to move around a vehicle without worrying about getting burnt. Designed for a long life of heavy-duty use, each LITESTIX is encased in an impact-resistant polycarbonate housing. Other key features are an innovative telescoping holder and magnetic swivel mounts that let you put it where you need it.
LITESTIX also solves the century-old problem of how to sit a shop light snugly on a vehicle’s hood, roof, or other points on the body. Placement on the vehicle is often necessary to get the best visibility, but traditional lamps roll off. To accomplish this feat, LITESTIX has dual 90-degree swiveling handles equipped with magnetic ends that enable mounting the light tube on any flat or off-angle metallic surface.
The lamp’s all-steel telescoping cradle frame can extend from 49.5˝ to 79.75˝ in length and can secure to the underside of a vehicle hood, for example, with the help of grabbing hooks attached at both ends of the frame. When used without the cradle frame, LITESTIX can be hung using recessed hooks inside the handles that twist out as needed.
To order or learn more about the next generation of LITESTIX, visit
link hidden, please login to view or call (800) 253-2363. The post
link hidden, please login to view appeared first on link hidden, please login to view.
link hidden, please login to view -
-
-
By Counterman
The Auto Care Association recently announced the addition of Jacki Lutz as director of content to its communications team.
As the director of content, Lutz will be tasked with leading a cross-functional and multimedia content strategy, development and execution across all platforms. Lutz also will be responsible for shaping and driving content initiatives to meet the association’s business objectives; enhancing brand presence; and engaging with current and prospective members.
With more than a decade of marketing and communications experience in the automotive aftermarket, “Lutz’s mastery of telling brands’ stories in a clear and compelling way will enable the association to expand the reach of its mission to more industry professionals both across the supply chain and up and down the business ladder,” the association said in a news release.
“The Auto Care Association has spent the past several years working on building an organization that meets its members’ needs of today with solutions that can carry them into the industry of tomorrow,” said Bill Hanvey, president and CEO. “A vital part of being that kind of a dependable association for its members means being able to connect with them – all of them – and that begins with great communication. The addition of Jacki Lutz to our communications team will help the Auto Care Association to grow its connections with our members and share their stories in an impactful way with the entire auto care industry.”
Prior to joining the Auto Care Association, Lutz served as the senior manager of global corporate marketing communications for Sensata Technologies, where she created and executed a new centralized marketing communication strategy for all of its business units, including aerospace, automotive, heavy-duty, clean energy and aftermarket. Since 2013, Lutz previously held additional roles within Sensata Technologies, including global head of communications, training and e-commerce, auto and aftermarket; global head of marketing and communications, aftermarket; and marketing and communications manager, NA aftermarket.
Lutz has been an active member of the Auto Care Association, participating in and providing leadership to the association’s Marketing and Communications Committee; the Young Auto Care Network Group (YANG); the AWDA Manufacturer’s Advisory Council; and the Women in Auto Care Executive Board.
Lutz has contributed to several other prominent industry organizations throughout her career. She served as president of the Automotive Communications Council and has contributed her expertise to the boards of MEMA Aftermarket’s Marketing Executive Council and the Automotive Aftermarket Charitable Foundation.
Lutz’s remarkable contributions have been recognized with prestigious accolades, including the Auto Care Impact Award, SEMA’s 35 under 35 distinction, membership in Babcox’s Women at the Wheel and induction into Tire Review’s esteemed Club 3633.
The post
link hidden, please login to view appeared first on link hidden, please login to view.
link hidden, please login to view 
-
By NAPA
When it comes to working in the shop, personal safety should always be the top priority. Safety glasses, gloves, hearing protection, even work boots are all meant to keep your body protected. It should come as no surprise that with new hybrid and electric drivetrains, there are also new safety gear requirements. Insulated tools are just the start of a well-stocked shop. There’s more to electrical safety than just owning a set of
link hidden, please login to view. This expert advice is meant to give an overview of the kinds of general
link hidden, please login to view (PPE) needed to service hybrid and electric vehicles. It is important to follow proper repair procedures for these vehicles, as described in the vehicle specific repair manual. This includes using all required PPE listed in the repair procedure with no exceptions. If you do not have ALL of the necessary PPE, DO NOT proceed with a repair, as doing so could lead to severe injury or even death. Now that you have an idea of the serious nature of vehicle high-voltage electrical systems, let’s take a look at how you can protect yourself. Personal Protection
Wearing the right personal protection gear is a must when working with electric and hybrid vehicle high-voltage systems. The electrical energy stored in a typical main traction battery pack is more than enough to kill or seriously injure a person.
In the past, wearing gloves while working on a car was usually a personal preference. Today, when working on high-voltage electrical systems, wearing gloves is mandatory. And not just one pair of gloves, but two pairs (inner and outer) are to be worn together. Just in case you are wondering, welding gloves are NOT the same as high-voltage
link hidden, please login to view. Class 0 gloves are required for protection up to 1,000 volts AC and 1,500 volts DC. One pair of rubber gloves (inner) protects against electric shock, while the leather gloves (outer) protect the rubber gloves from mechanical wear. They must be worn together in order to perform correctly. Electrical gloves
link hidden, please login to view every six months to ensure they are still capable of insulating the user from the rated voltage. Gloves will be labeled with the test date near the cuff. The exact personal protection gear needed for a repair will be spelled out in the vehicle service repair manual procedures. This may include an insulated apron,
link hidden, please login to view, insulated arm sleeves, link hidden, please login to view, arc flash face shield with neck protection, and insulated mats or blankets. These layers of protection are necessary not just for avoiding shocks, but also potential explosions like an arc flash. Tool Safety
It may seem odd to consider hand tools as part of personal protection equipment, but that is exactly the case when working with electricity. Most ordinary hand tools are made from metal, which does an excellent job conducting electricity. For servicing high-voltage electrical systems tools need to be designed in such a way that they don’t provide a path for electricity to travel to the technician, or to other vehicle components. That’s why EV tools are specially designed to protect the technician when used properly.
An EV tool set is a must-have for any technician looking to service an electric vehicle. A good start for insulated hand tools is an insulated screwdriver set, an
link hidden, please login to view and an link hidden, please login to view. Electric vehicle tools used for diagnostics need to handle higher voltages, like this link hidden, please login to view. For repairs where the battery pack must be removed, special care must be taken due the extreme weight involved. A link hidden, please login to view is the proper way to lower and transport a hybrid or electric vehicle battery pack. You wouldn’t pull an engine out of a car without the proper lifting equipment, so give the same respect to a heavy traction battery pack. Work Space Safety
Normally, when a car is being worked on in a service bay, there is little danger to fellow technicians. But that isn’t the case with a modern electric or hybrid vehicle. Whenever the high-voltage electrical system on one of these vehicles is exposed, proper notification must be given to those working in the area. Place
link hidden, please login to view and link hidden, please login to view around the vehicle whenever the high voltage electrical system is being serviced. This warns other technicians that there is an electrical shock hazard in the shop, and to keep their distance. You may also place an electrical warning sign on the vehicle to signal to everyone in the shop to stay away. Part of your workspace safety gear must be an
link hidden, please login to view. If a technician suffers an electrical accident while working on a vehicle, anyone attempting to help them is also in danger of electric shock. An insulated safety hook must be used to separate the victim from the electrical source. The last tip for work space safety is to never work on an electric or hybrid vehicle alone. Always let another technician or coworker know you are working on a high-voltage electrical system, and to check in on you periodically. Training Is The Key To Safety
Working on hybrid and electric vehicle high voltage systems requires meticulous procedures and extensive training. While there are plenty of dangers when working on internal combustion vehicles, many of the safety procedures surrounding those vehicles have been known for decades. As EV and hybrid drivetrain become more mainstream, so will their service safety procedures.
Tackling hybrid and electric vehicle high-voltage system repairs isn’t impossible, but there must be dedication to proper training. If you are a technician (or are wanting to become a technician), and are looking for electric vehicle service training,
link hidden, please login to view can help. NAPA Auto Tech offers a wide variety of convenient, cost-effective ways to become an automotive professional. In addition to eLearning and instructor-led training, NAPA Auto Tech offers hands-on and seminar-style classes for almost every make and model to help technicians keep their skills up to date. Photos courtesy of Brian Medford.
The post
link hidden, please login to view appeared first on link hidden, please login to view.
link hidden, please login to view
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.