Jump to content

Recommended Posts

Posted

link hidden, please login to view
With a majority of vehicle owners living in areas of the country that have stay-at-home orders, many vehicles may be sitting idle for days or weeks at a time. The non-profit Car Care Council recommends starting your car at least once a week and keeping up with routine auto care to help prevent potential maintenance issues.

“Just as it is recommended that people stay active during this time of social distancing, your car should get some activity as well,” said Rich White, executive director, Car Care Council. “If your vehicle sits idle for too long, the battery could die, the tires can develop flat spots and the engine oil may start to deteriorate. Just a short solo drive once a week and a little car care will keep your car running efficiently and safely.”

When starting your car weekly, let it run for at least five minutes. If the vehicle is started in a garage, make sure the garage door is open and there is plenty of ventilation. In addition, the Car Care Council suggests monitoring the following areas of your vehicle if it sits idle for long periods of time.

Battery – Today’s vehicles have several computers that are always in operation, so if a car sits too long without recharging, the battery could die within a couple of weeks.

Tires – Maintain proper tire pressure to improve vehicle performance and gas mileage. Doing so is also important for vehicle safety. Checking the tire pressure frequently is more important if the car is parked for long periods of time. Vehicles that sit idle too long can develop flat spots, so taking a brief drive every once in a while will help prevent bald spots, and recharge the battery, too.

Fuel – Today’s modern fuel systems help preserve the life of the gas in your tank and also prevent fuel oxidation. Keeping a full tank of gas helps limit gas-tank condensation. If you are still concerned about the gas in your tank going bad, a fuel stabilizer may help extend the life of your fuel.

Oil – If a car sits too long, the oil can deteriorate, so continue to change the oil at the proper time intervals, even if you are not driving your normal mileage. It is always best to check the owner’s manual for the maximum time you should wait between oil changes.

Brakes – If a car sits idle, rust can start to form on the brake rotors, especially if the car is parked outside. Driving your car at least once a week will help prevent rust buildup.

Cleaning – Removing the grime and sediment that builds up on the outside of your car helps prevent rust, and cleaning the interior is important, too. Wipe down the dashboard, steering wheel, cup holders, door handles, vents and console with a quality, all-purpose automotive cleaner that will help disinfect the interior areas of your vehicle.

For more helpful information about maintaining your vehicle for safety, dependability and value, visit

link hidden, please login to view
to order the Car Care Council’s free 80-page Car Care Guide.

The post

link hidden, please login to view
appeared first on
link hidden, please login to view
.

link hidden, please login to view

  • 4 weeks later...
  • 4 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Counterman
      Scheduling of delivery drivers can be one of the more difficult personnel-related tasks for any manager. Often at the lower end of your pay scale and frequently staffed by part-time employees, these positions can be difficult to screen, fill and maintain. They are a critical link to commercial success, yet their value is easily overlooked when weekly schedules are created.
      In many retail environments, analysis of prior hour-by-hour sales figures often shapes the forecast for staffing future shifts. Adequate staffing at the front counter is critical to assisting customers and moving merchandise efficiently, but in order to accurately forecast demand for delivery drivers, we must ignore the majority of retail sales, which occur in-store or, increasingly, as online purchases. Unless your business model includes “home delivery” to retail customers, staffing your delivery needs will revolve exclusively around your commercial accounts.
      Having adequate delivery capability to maintain (or strengthen) your commercial relationships can look different for each location. Vehicle and personnel numbers will vary based primarily on that individual store’s customer mix and the type of market served. Wholesale jobbers generally serve a broader geographic area than retailers, due in part to their smaller store network. A chain retailer is more likely to have a greater concentration of individual stores per square mile, each serving a smaller area, while the jobber maintains a larger commercial customer base spread across a larger geographic area. 
      As a result, jobbers tend to make better use of scheduled route delivery, in contrast to focusing on frequent short “on-demand” deliveries in the immediate area. These schedules are much easier to forecast, as they are somewhat consistent throughout the business day. When scheduling for the “hot-shot” portion of your delivery needs, however, the natural ebb and flow of your store’s daily routine become an important factor. There are key points throughout each day that require additional delivery staffing. 
      Many stores enjoy some form of overnight warehouse delivery, and those daily orders will be expected at shops across your territory as soon as possible the following morning. Between those “first thing in the morning” deliveries and the daily ritual of vehicle pre-checks, the first hour of the workday can be a beehive of activity for your delivery staff. By the time your trucks are returning from their early rounds, orders generated from those 8 a.m. diagnostic appointments at shops across your market have begun to filter in, resulting in another rush. Customer calls ramp up again before and during the traditional lunch hour, as shops try to arrange deliveries to arrive before technicians return from their breaks. Another flurry of dispatches will be in response to the afternoon’s diagnostics, with shops hoping to wrap up repairs before end of day, and to beat the overnight order deadlines for the next day’s business.
      In addition to customer-driven rushes, we may also see a spike in driver demand centered around our own incoming deliveries. Stores with midday warehouse deliveries will see a surge in demand around these times, as well as those created by UPS or FedEx drop-offs. Most of our best customers already know what time to expect such special orders, and the volume of “where’s my stuff?” calls will add to the sense of immediacy felt by everyone on staff!
      Delivery scheduling can also be adversely affected by seasonality and holidays. Freezing or snowy weather not only creates delays in parts deliveries from the warehouse and at store levels, but it can also limit an individual driver’s ability to report for duty as scheduled, creating a gap in coverage. Coupled with the longer delivery times required for the remaining staff to complete routes safely, it can create temporary bottlenecks. Holidays also create personnel issues, as we attempt to find coverage for those days that everyone wants to spend with family and friends. Travel-intensive holidays like Memorial Day, Independence Day and Labor Day also create an increased demand from shops prepping vehicles for extended trips, with added pressure for everyone to complete repairs, often at the last minute.
      The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view
    • By Counterman
      It’s a common comeback: a failed starter covered in oil. Let’s break down why replacing it alone won’t fix the issue and how to prevent it.
      The starter converts electrical energy into mechanical rotation to crank the engine. It relies on clean, dry internal components for proper operation. Engine seals, like valve covers, cam seals, rear main seals and oil pans, are designed to keep oil contained. When these seals fail, oil can leak externally and contaminate components mounted below, including the starter.
      In some vehicle layouts, a rear main seal leak can travel along the bellhousing and reach the starter, though that depends on how the engine and transmission are positioned.
      An oil-soaked starter can suffer internal damage to brushes and electrical contacts, leading to slow crank, intermittent operation, or no crank at all. Oil also attracts dirt, accelerating wear.
      Heat plays a role as well. On vehicles where the starter is located near the exhaust, oil contamination can bake onto the housing and internal components, forming a varnish or sludge. That buildup can increase electrical resistance and further degrade starter performance.
      In real world situations, a technician may replace the starter, only to see the new one fail prematurely. That often results in warranty returns, but the real issue is the unresolved oil leak continuing to contaminate the replacement unit.
      Verify the starter concern, then inspect for oil contamination. Check above the starter for leaks from valve covers, cam seals, or rear main seals. ASE diagnostic logic emphasizes fixing the root cause before replacing components. The correct repair may involve replacing the failed gasket or seal. If immediate repair isn’t practical,
      link hidden, please login to view can be used to help restore seal condition and reduce leakage. To apply, add it to the engine oil, do not overfill, run the engine to circulate, then drive normally. Most leaks stop within a few days of operation. If the starter is oil-soaked, the leak is the problem. Fix it, or the failure will come back.
      This video is sponsored by link hidden, please login to view.
      The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view
    • By Dorman Products
      Make Dorman your First Stop for brake solutions
    • By Dorman Products
      Make Dorman your First Stop for brake solutions
    • Government UFO Files
    • By Dorman Products
      Make Dorman your First Stop for brake solutions

×
  • Create New...